ASTM A234Gr.WPB R-TEE 42SCH40 SMLS ASME B16.9

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Steel pipe fitting are made of carbon or alloy steel pipe, plates, profiles, to a certain shape that could make a function (Change the fluids direction or rate) in pipeline systems. Mostly these fittings includes steel elbow (45 or 90 degree bend), tee, reducer (concentric or eccentric reducer), cross, caps, nipple, flanges, gasket, studs and etc.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A515 grade 70 carbon steel has the advantage of high strength due to its machinability and formability characteristics. Due to their high chromium content, these carbon steels have excellent corrosion resistance in many media.

Flanges are an integral part of the process industry. Most industries, including oil and gas, water treatment, and nuclear power generation, use pipes that allow media to flow between different plant units. Components such as fittings and carbon steel SA105 pipe flanges help regulate the flow of said media.

Carbon steel A105 bars are also used in offshore oil industry and seawater equipment. Carbon steel A105 round bars are commonly used in pumps, condensers and heat exchangers. These carbon steel A105 bars ensure the toughness to deliver the highest quality industry standard product. A105 is very popular in several industries for its enhanced potency and strength. Carbon steel a105 round bars have good machinability and are widely used for ideal finish, long lasting performance and corrosion resistance. The a105 square bar is widely used in many industries for manufacturing or final assembly. Our A105 bars are suitable for chemical, power and engineering industries. Designed with our engineering advantages, these A105 rods are widely used for ideal finish, ease of installation, long-lasting performance and corrosion resistance.

ASTM A350 LF2 Carbon Steel Bar is a heat resistant steel with high resistance to oxidation scaling and high strength at elevated temperatures.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

Carbon steel is a steel in which the main alloying element is carbon. Steel is considered carbon steel when there are no minimum requirements for chromium, cobalt, molybdenum, nickel, titanium, tungsten or other alloying elements. Carbon steel can be made harder and stronger through heat treatment. These hardness and strength measurements are determined by the carbon content – the higher the carbon content, the harder and stronger the steel will be.

Equal cross, generally for the professional term, four for pipe fittings, pipe connectors, used in the main pipeline to branch pipe.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Flanges made of carbon and low alloy steels can be found in the standard ASTM A350 specification.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Carbon steel is defined as any steel with a carbon content not exceeding 2.1% by weight. As the carbon content increases, the ductility of the steel decreases, and carbon steel bolts become harder and increase in strength after heat treatment.

It includes solid design, wear resistance, very good durability, solid construction, corrosion resistance, excellent strength, best quality.

Most ASTM A694 F52 flange manufacturers state that the flange has enhanced mechanical properties such as its high tensile strength, good heat resistance and corrosion resistance.

ASTM A516 plate can be used to make flange blinds, reducer flanges without hubs, plate flanges, eyeglass blind flanges (Figure 8 blank flanges), spacer flanges, paddle blanks, and more. These flanges shall be in accordance with manufacturing standard specifications ASME B16.5, ASME B16.48, EN 1092-1, AS 2129 and ASME B16.47 etc.

ASTM A350 LF3 Carbon Steel Round Bars are designed and developed to international quality standards. We have ready stock to ship to most parts of the country. These ASTM A350 LF3 carbon steel round bars are made of high grade corrosion resistant metal alloys.

Carbon steel LF3 bars are mainly used in the construction of skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

The ASTM A307 specification covers carbon steel bolts and studs ranging in diameter from 1/4″ to 4″. This is your everyday mill bolt specification, usually made from A36 round bar. There are three grades A, B and C* for tensile strength, configuration and application, respectively. See the mechanical properties chart for subtle strength differences within each grade.

There are different weights to the different dimensions of flanges as well. You can contact us to get a ASTM A105 flanges weight chart to understand more about the flange weights and to choose from a host of flanges.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

High carbon steel bolts have a carbon content between 0.60 – 1.25%. High carbon steel alloys have manganese content in the range of 0.30 – 0.90%. Of all three grades, high carbon steel threaded rod has the highest hardness and toughness while exhibiting the lowest ductility. The high wear resistance comes from the fact that these screws are almost always hardened and tempered.

ASTM A694 is a standard specification covering carbon and alloy steel forgings for pipe flanges, fittings, valves, and other parts for high pressure transmission services. The steel meets chemically analyzed standard chemical composition requirements and meets full casting and tensile strength performance requirements.