Astm A240 310S 1.4845 No.1 Price Grade Sheet Roll Coil Stainless Steel Plate 304 316

304 stainless steel plate is comprised of at most 0.08% carbon. 304 stainless steel plate also includes at most 2.0% manganese and 0.75% silicon.

Stainless steel has higher resistance to oxidation (rusting) and corrosion in many natural and man-made environments; however, it is important to select the correct type of stainless steel for use. There are more than 150 grades of stainless steel, of which 15 are the most used.

Alloy 317L (UNS S31703) is a low carbon corrosion resistant austenitic chromium nickel molybdenum stainless steel. High levels of these elements ensure that the alloy has chloride pitting and general corrosion resistance superior to traditional 304/304L and 316/316L grades. This alloy provides increased resistance relative to 316L in highly corrosive environments with sulfur-containing media, chlorides and other halides.

HT PIPE has modern equipment with skilled and professional teams. We make proper use of advanced tools and strictly follow a well-defined manufacturing process. This high-grade material includes manganese, carbon, silicon, phosphorus, sulphur, chromium, nickel, molybdenum in it.

SA240 1.4436 plate is typically available in thicknesses ranging from 0.1875 inches to 4 inches (4.8 mm to 101.6 mm) and widths ranging from 48 inches to 120 inches (1219.2 mm to 3048 mm). The length of the 1.4401 plate can be customized based on customer requirements. You can check the ss 316 plate price at HT PIPE!

Although chemically similar to 316 grade austenitic stainless steel, 317 alloy has a slightly higher molybdenum content in its alloy. Above 3% molybdenum, the properties of stainless steel 317 sheet and plate are enhanced, making it particularly suitable for applications that cannot be met with 316 alloy.

The higher alloy content of super-austenitic steels makes them more expensive. Other steels can provide similar properties at a lower cost and are preferred in some applications. [citation needed] Low carbon versions, such as 316L or 304L, are used to avoid welding-induced corrosion problems.

The SS 904L coil is used in heat exchangers and in high temperature applications because of their high melting range of 1300 to 1390 degrees Celsius.

Grade WNR 1.4571 Plates is often used in Pulp and Paper Equipment, Heat exchangers, Propeller shafts, Fittings, Dyeing Equipment, Exterior Architectural components in Marine Coastal Areas, etc. ASME SA 240 Stainless Steel TP316Ti Plates has good resistance to oxidation in intermittent service to 870 Degree C and in continuous service to 925 Degree C. Buy?316Ti Stainless Steel Plates at reasonable price from us.

It works in both hot and cold practice. SS 316Ti are perfectly suitable to use in corrosive conditions. It is completely austenitic and has higher molybdenum content which gives it a high resistant.

A240 Type 304 stainless steel cutting pieces. ASTM a240 (Chromium and Chromium Nickel Stainless Steel Sheet, Sheet and Strip for Pressure Vessels and General Applications. A240 304 Stainless Steel is a common material in Stainless Steel with a density of 7.93g/cm3, also known as 18/8 Stainless Steel Industrial Made of steel, it is widely used in industry, furniture decoration industry and food and medical industry.

For 304 steel, when stainless steel parts such as nuts and bolts are pressed together, the oxide layer can be scraped off, causing the parts to weld together. When disassembled, the weld material may tear and pit, an effect known as galling.

When selecting the 304 Stainless Steel that must endure corrosive environments, austenitic stainless steels are typically used. Possessing excellent mechanical properties, the high amounts of nickel and chromium in austenitic stainless steels also provide outstanding corrosion resistance.

A304 steel plate has several good properties that make it the perfect choice. It has good dimensional accuracy, high tensile strength, sturdy construction, excellent surface finish, and can withstand heavy loads/high temperature/pressure. Other good properties such as high durability, resistance to pitting, oxidation, stress corrosion cracking, crevice corrosion and general corrosion make it effective.

310S stainless steel is the lower carbon version of 310 plate which is less prone to embrittlement and sensitization in service. 310H stainless steel plate is the high carbon version.

Alloy 904L stainless steel plate in thicknesses from 3/16″ through 2″. Alloy 904L (UNS N08904) is a superaustenitic stainless steel designed for corrosion and pitting resistance in a wide range of process environments.

Alloy 317L (UNS S31703) is a molybdenum-containing austenitic stainless steel with significantly improved chemical resistance compared to conventional chromium-nickel austenitic stainless steels such as alloy 304. Additionally, Alloy 317L has higher creep, stress-fracture and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon or “L” grade that provides resistance to sensitization during welding and other thermal processes.

The 1.4539 Plate is a standard which governs the thickness of the sheets and plates. There are different specifications to cover the sheets and plates as well.

304 stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include: chemical processing and storage equipment, refinery equipment, medical devices, marine environments, especially those with chlorides present.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

We are Manufacturer, Supplier & Exporter of Stainless Steel 316/316L/316Ti Sheets, Plates are austenitic steel alloys that combine properties like excellent ductility, high temperature withstanding properties, and good weldability in one. These stainless steel sheets, plates are either machined or fabricated as per the national and international standards.

304 and 304L stainless steel plates belong to the series of austenitic stainless steels and are one of the most versatile and versatile stainless steel plate varieties.

Precipitation hardening martensitic stainless steels have comparable corrosion resistance to austenitic grades, but can be precipitation hardened to higher strengths than other martensitic grades. The most common 17-4PH uses about 17% chromium and 4% nickel. The Lockheed-Martin Joint Strike Fighter was the first aircraft to use precipitation-hardenable stainless steel Carpenter Custom 465 in its fuselage.

Alloy 304/304L is non-magnetic in the annealed condition, but can become slightly magnetic as a result of cold working or welding. It can be easily welded and processed by standard shop fabrication practices.

The alloy has excellent resistance to intergranular corrosion in the as-welded condition.

Nitrogen is used to stabilize 316L, whereas titanium is used to stabilize?Stainless Steel 316Ti Coils. Titanium is a stronger element and has much better corrosion resistance properties as well. Titanium forms titanium carbides on the surface of the?AISI 316TI Plate, during welding thereby effectively eliminating sensitization at the grain boundary.

Some automakers use stainless steel 304 steel sheet as a decorative highlight in their vehicles.

304 stainless steel plate, there are different types of stainless steel: for example, when nickel is added, the austenitic structure of iron is stabilized. This crystal structure makes the steel almost non-magnetic and less brittle at low temperatures. For greater hardness and strength, add more carbon. With proper heat treatment, these steels can be used in razor blades, cutlery, and tools, among others.

Alloy 904L(UNS N08904, 1.4539) is a high-alloy austenitic stainless steel with low carbon content, it offers excellent corrosion resistance in various environments such as seawater and acidic solutions.

Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements include manganese, silicon, and carbon. The remainder of the chemical composition is primarily iron.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

The Stainless Steel 304 Sheet also has manganese, carbon, silicon, sulfur, nitrogen and phosphorus in the composition. The material is strong and has 205MPa minimum yield strength and 515MPa minimum tensile strength in general.