Astm A240 317 1.4449 201 202 304 304L 904L Stainless Steel Plate 1.4301 6X2000x6000 52 Pcs

304 Stainless Steel Plate has very good formability and can be readily welded by all common methods. 304/304L dual certified.

The 6Mo super austenitic steel combines moderate tensile strength and high ductility with excellent corrosion resistance in seawater and variety of industrial environment.

Common ferritic grades include 18Cr-2Mo, 26Cr-1Mo, 29Cr-4Mo and 29Cr-4Mo-2Ni. These alloys may degrade due to the presence of alpha chromium, an intermetallic phase that precipitates during welding.

Las placas ASTM A240 SS 316Ti se usan com¨²nmente en intercambiadores de calor, equipos de fabricas de papel y componentes de construccion en ambientes marinos. La placa de acero inoxidable UNS S31635 conserva propiedades fisicas y mecanicas similares al grado estandar 316.

310S stainless steel is the lower carbon version of 310 plate which is less prone to embrittlement and sensitization in service. 310H stainless steel plate is the high carbon version.

SA240 1.4436 plate is typically available in thicknesses ranging from 0.1875 inches to 4 inches (4.8 mm to 101.6 mm) and widths ranging from 48 inches to 120 inches (1219.2 mm to 3048 mm). The length of the 1.4401 plate can be customized based on customer requirements. You can check the ss 316 plate price at HT PIPE!

Compared to Types 302 and 304, 316 stainless steel has higher corrosion resistance and high creep strength. It has improved high temperature strength over 304 and exhibits excellent pitting resistance. Grade 316 is non-magnetic in the annealed state.

When the chromium content of the alloy is below a minimum of 12%, for example in the aerospace industry, the term “corrosion resistant steel” is used. Stainless steel comes in different grades and surface finishes, depending on where it is used.

304 stainless steel plate, there are different types of stainless steel: for example, when nickel is added, the austenitic structure of iron is stabilized. This crystal structure makes the steel almost non-magnetic and less brittle at low temperatures. For greater hardness and strength, add more carbon. With proper heat treatment, these steels can be used in razor blades, cutlery, and tools, among others.

A super duplex stainless steel is defined as a duplex stainless steel with a pitting corrosion equivalent (PRE) > 40, where PRE = %Cr + 3.3x(%Mo + 0.5x%W) + 16x%N. Usually super duplex steels have a chromium content of 25% or more, some common examples are S32760 (Zeron 100), S32750 (2507) and S32550 (Ferralium), but not all Ferralium grades are super duplex steels.

SS 310 Plate is a highly versatile material used in various industries. It is often utilized in high-temperature services due to its ability to resist oxidation and corrosion at extreme temperatures.

Stainless steel 304, 304l is a versatile stainless steel that is widely used in the production of equipment and parts that require a good combination of properties (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, stainless steel plate must contain more than 18% chromium and more than 8% nickel.

It is expeditiously brake or roll surrounded into a variety of parts for applications in the mechanical, basic, and transportation fields. This structure gives these Stainless Steel 316 Plates their characteristic combination of weldability and formability.

Alloy 347H (UNS S3409) stainless steel plate is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000°F (537°C). In most instances, the carbon content of the plate enables dual certification.

In addition, when the surface of 304 steel plate is scratched, the layer will quickly reform. This phenomenon, called passivation, is seen in other metals such as aluminum and titanium. Corrosion resistance of 304 steel plate may be adversely affected if used in a non-oxidizing environment, a typical example being underwater keel bolts buried in wood.

When the chromium content of the alloy is below a minimum of 12%, for example in the aerospace industry, the term “corrosion resistant steel” is used. Stainless steel comes in different grades and surface finishes, depending on where it is used.

For 304 steel, when stainless steel parts such as nuts and bolts are pressed together, the oxide layer can be scraped off, causing the parts to weld together. When disassembled, the weld material may tear and pit, an effect known as galling.

Stainless steel does not stain, corrode, or rust as easily as regular steel, but it is not stain-resistant.

Stainless Steel 316Ti Sheets in Stock Now & Ready to Deliver Today!?Our Company, HT PIPE is a well known manufacturer and supplier of stainless steel 316Ti sheets designed and manufactured from high quality raw materials, as per international standards. We have supply of our stainless steel 316Ti sheet products to many countries.

304 and 304L stainless steel plates belong to the series of austenitic stainless steels and are one of the most versatile and versatile stainless steel plate varieties.

Chromium forms a passivation layer of chromium (III) oxide (Cr2O3) when 304 steel is exposed to oxygen. The layer is too thin to see and the metal is still shiny. The 304 steel plate layer is impermeable to water and air, protecting the metal underneath.

Martensitic stainless steels are not as corrosion resistant as the other two categories, but are very strong and tough, and are highly machinable and can be hardened by heat treatment. Martensitic stainless steels contain chromium (12 14%), molybdenum (0.2 1%), nickel (less than 2%) and carbon (about 0.1 1%) (making it harder, but the material is more brittle). It is quenched and magnetic.

Alloy 904L(UNS N08904, 1.4539) is a high-alloy austenitic stainless steel with low carbon content, it offers excellent corrosion resistance in various environments such as seawater and acidic solutions.

It is common practice for 304L to be dual certified as 304 and 304L. The low carbon chemistry of 304L combined with an addition of nitrogen enables 304L to meet the mechanical properties of 304.

304 Steel Plate Storage tanks and tankers used to transport orange juice and other food products are often made of stainless steel because of its corrosion resistance and antimicrobial properties. This also affects its use in commercial kitchens and food processing plants,

304 stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include: chemical processing and storage equipment, refinery equipment, medical devices, marine environments, especially those with chlorides present.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Taking the customer as the center, our ultimate goal is stainless steel coil, original TISCO, stainless steel plate mirror, 316LVM stainless steel bar. We strive to meet the needs of customers, always put the interests of customers and the growth of employees in the first place, and take a harmonious, stable, healthy and sustainable development path.

Although chemically similar to 316 grade austenitic stainless steel, 317 alloy has a slightly higher molybdenum content in its alloy. Above 3% molybdenum, the properties of stainless steel 317 sheet and plate are enhanced, making it particularly suitable for applications that cannot be met with 316 alloy.

A240 316TI steel sheet?overall performance is better than steel 310 and 304 stainless steel, high temperature conditions, when the sulfuric acid concentration of less than 15% and greater than 85%, 316 stainless steel with a wide range of uses. 316TI stainless steel and chloride also has good corrosion performance, it is usually used in the marine environment.

ASTM A240 316Ti plates shall be made by a hot rolling or cold rolling process depending on buyer‘s requirements. The steel shall be made by the electric-arc furnace usually followed by an electroslag remelting process. The plates shall be provided with solution annealing heat treatment, in which it is soaked in the 1900-2150 degree temperature range followed by a water quench.