Astm A240 347 1.4550 Plate Price 316 Stainless Steel Good No.1 Mirror Finish 316L Sheet

Alloy 904L stainless steel plate in thicknesses from 3/16″ through 2″. Alloy 904L (UNS N08904) is a superaustenitic stainless steel designed for corrosion and pitting resistance in a wide range of process environments.

304/304L stainless steel plate is one of the most versatile and widely used stainless grades. Due to its lower carbon content and higher chromium composition, this grade is among the best in its class for strength, corrosion resistance, and formability.

ASTM A240?specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications.

304 steel plate is ground into coils, sheets, plates, bars, wire, and tubes for use in cookware, tableware, hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries), and automotive and aerospace structures Large Alloys and building materials in buildings.

304 stainless steel sheet is also used in aerospace structures, pressure applications, food and beverage industries, and more. 304L stainless steel plate has excellent corrosion resistance under normal atmospheric conditions at normal temperature and can withstand some natural acids.

304 Stainless Steel is useful where sanitation and cleanliness are important. And it is non magnetic in the annealed condition.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

To achieve optimum corrosion resistance, subsequent stabilizing heat treatment may be performed. Since chromium carbides dissolve at a lower temperature range than titanium carbides, usually the stabilizing temperature is controlled between 1550-1650¡ãF [845-900¡ãC] at which titanium carbides will precipitate but chromium is still in solution. After soaking in the stabilizing temperature for at least 2 hours, the Type 316Ti plates shall be rapidly cooled by air.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

HT PIPE delivers product safely to clients. Product is packed in a wooden box or plate according to customer requirements. Our team ensures to avoid any damage to the product during transportation. We assign products to an experienced sales representative who knows the nature of packaging. All documents and details of products are delivered to clients. We offer many convenient shipping ways. We also accept the suitable mode of shipping suggested by the clients.

304 Stainless Steel Plate has very good formability and can be readily welded by all common methods. 304/304L dual certified.

Grade 316 stainless steel, which reduces the amount of ferrite in the metal and has been found to be essential for certain chemical processes.

Chromium, nickel, and iron are the primary alloying elements in austenitic stainless steel.

Las placas ASTM A240 SS 316Ti se usan com¨²nmente en intercambiadores de calor, equipos de fabricas de papel y componentes de construccion en ambientes marinos. La placa de acero inoxidable UNS S31635 conserva propiedades fisicas y mecanicas similares al grado estandar 316.

Stainless steel 310 sheet is a medium carbon austenitic stainless steel, for heat applications such as furnace parts and hotness procedure tools.

This prevents any further corrosion of the surface. Increasing the chromium content can improve corrosion resistance.

The?ASME SA240 Grade 316ti plate?can have different types of surfaces such as 2B, 2D, checkered embossed or hair line. There are different finishes such as hot rolled and cold rolled as well. Some are even plastic coated. With the high tensile strength and yield strength similar to the 316 material, the?Alloy 316ti coil?is also used in high temperature applications like heaters, condensers and in boilers.

The higher alloy content of super-austenitic steels makes them more expensive. Other steels can provide similar properties at a lower cost and are preferred in some applications. [citation needed] Low carbon versions, such as 316L or 304L, are used to avoid welding-induced corrosion problems.

A240 316TI steel sheet?overall performance is better than steel 310 and 304 stainless steel, high temperature conditions, when the sulfuric acid concentration of less than 15% and greater than 85%, 316 stainless steel with a wide range of uses. 316TI stainless steel and chloride also has good corrosion performance, it is usually used in the marine environment.

904l stainless steel plate is a super austenitic stainless steel that provides moderate to high corrosion resistance in a variety of environments. A mixture of chromium and nickel content, along with the addition of molybdenum and copper, provides excellent corrosion resistance. With nickel 25% and molybdenum 4.5%, ASTM B625 UNS N08904 provides good resistance to chloride stress corrosion cracking, pitting and general corrosion, which are superior to 316L and 317L.

HT PIPE is the most well-known 316TI steel supporter and exporters of China, to provide you with a variety of High tensile steel plate you need, if you want to ask specific 316TI stainless steel information, Welcome to send inquiry to us if you are interested in ASTM A240 316TI steel,or contact us on line freely.

Grade 304L is widely used in the manufacturing industry and all standard welding techniques can be used for 304L plate and 304L pipe. The “L” in 304L stands for “low carbon content” and indicates a maximum carbon content of 0.035%. The “H” in 304H stands for “High Carbon Content”, which means that the carbon content is not less than 0.04% and not more than 0.10%.

304 Stainless Steel Plate, is the most popular and economical of the stainless steels.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Although chemically similar to 316 grade austenitic stainless steel, 317 alloy has a slightly higher molybdenum content in its alloy. Above 3% molybdenum, the properties of stainless steel 317 sheet and plate are enhanced, making it particularly suitable for applications that cannot be met with 316 alloy.

Certification & Testing for Stainless Steel 316Ti Sheets ¨C All our products are supplied with Test Certificates, as per EN 10204 3.1 and/or NABL approved Lab Testing Reports

Alloy 304/304L (UNS S30400/S30403) is the most widely utilized ¡°18-8¡± chromium-nickel austenitic stainless steel. It is an economical and versatile corrosion resistant alloy suitable for a wide range of general purpose applications.

Furthermore, the use of?SS UNS S31635 Plate?is prevalent in industries that necessitate welding and require mechanical properties at a higher level than what grade 316L can offer. The benefit of using is that the?316ti Steel Plates?could be employed for long sessions at elevated temperatures without any form of compromise to its corrosion resistance properties.

Inconel 600 is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures. It is highly versatile and can be used in everything from cryogenics to applications that present elevated temperatures up to 2000¡ãF (1093¡ãC).

304 stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include: chemical processing and storage equipment, refinery equipment, medical devices, marine environments, especially those with chlorides present.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

A super duplex stainless steel is defined as a duplex stainless steel with a pitting corrosion equivalent (PRE) > 40, where PRE = %Cr + 3.3x(%Mo + 0.5x%W) + 16x%N. Usually super duplex steels have a chromium content of 25% or more, some common examples are S32760 (Zeron 100), S32750 (2507) and S32550 (Ferralium), but not all Ferralium grades are super duplex steels.