astm a276 420 bar

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

Applications and typical uses of stainless steel round bars are: Offshore (foils, helideck platforms, etc.), food industry, pulp and paper industry, aerospace (turbine blades, etc.), mechanical parts, nuclear waste barrels, valve stems, balls, liners sleeves, valve seats, etc.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Precipitation hardening stainless steels are characterised by the addition of aluminium, niobium and copper to very high strengths Relatively machinable without significant deformation, depending on the additives more or less corrosion resistance compared to other types but higher Corrosion resistance results in considerable costs.

Stainless steel 304 round bars are made of stainless steel with a composition of 18% chromium and 8% nickel. The material has corrosion resistance and strength properties. HT PIPE is one of the leading manufacturers and suppliers of stainless steel 304 round bar products. The material is strong, with a minimum tensile strength of 515MPa and a minimum yield strength of 205MPa. It can also operate at high temperatures.

Stainless Steel 310 Round Bar is a robust austenitic stainless steel grade bar used in a variety of industries. Applications include chemical, brewing, petrochemical, food processing and many other industries. Stainless steel 310 round bars are available in different sizes according to EN, DIN, JIS, ASTM, BS, ASME and AISI codes.

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

ASTM A479 can be described as a standard specification for stainless steel bars. They are available in custom shapes and sizes for use in boilers and pressure vessels. The material specification is available in four grades including austenitic, austenitic-ferritic, ferritic and martensitic grades. They have good mechanical properties such as high tensile strength, yield strength, elongation, etc. These can be used for hot and cold working bars.

ASTM A276 316 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Our range of high quality ASTM A479 stainless steel round bars are designed for the chemical industry, steel mills, petrochemicals, paper industry, shipping/shipping and more. ASTM A479 Stainless Steel Round Bar is a quality standard designed and developed to international standards. We are a certified company. We manufacture all ASTM A479 stainless steel round bars with the latest technology from our manufacturing unit.

About the hot strength of stainless steel bars
Austenitic grades maintain high strength at elevated temperatures. This is especially true for grades with high levels of chromium and/or silicon, nitrogen and rare earth elements such as grades 310 and S30815. High chromium ferritic steels like 446 can also exhibit high hot strength. The high chromium content of stainless steel also helps resist scaling at high temperatures.

Austenitic stainless steels are characterised, in the most common variants, for a wide range of applications
Weldable and formable due to manganese, nickel and nitrogen chemistry, balancing moderate strength, hardness (cannot be heat treated but can be “work hardened”), ductility and toughness, relatively susceptible to SCC unless nickel content is increased, Higher molybdenum content can enhance resistance to pitting and crevice corrosion (CCR).

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.

Stainless steel rods are popular for their corrosion resistance and are widely used in the construction of building foundations, bridges and marine environments. 304/304L Stainless Steel Round, an economical grade stainless steel ideal for all applications requiring strength and superior corrosion resistance.

The ASTM A479 specification covers hot-rolled and cold-rolled stainless steel bar, including round, square, and hexagonal, as well as hot-rolled or extruded shapes for boiler and pressure vessel construction, such as angles, tees, and channels. Four grades of stainless steel are available, including austenitic, austenitic-ferritic, ferritic and martensitic grades. Mechanical properties, such as tensile strength, yield strength, elongation, and hardness, shall be determined for specimens subjected to normalized, tempered, annealed, and quenched conditions.

Magnetic Response of Stainless Steel
Magnetic response is the attractive force of steel to a magnet. Austenitic grades are generally not magnetic, although a magnetic response can be induced in low austenitic grades by cold working. High nickel grades such as 316 and 310 will remain non-magnetic even when cold worked. All other grades are magnetic.

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

ASTM A479 310s Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

We have a large selection of stainless steel rods for sale, ranging in diameter from 3mm to 152mm. We supply stainless steel rods in standard lengths of about 3 meters, but we can also cut rods up to 5 meters for you. We offer stainless steel bars in grades 304 and 316. Grade 304 is a general purpose grade and is ideal for welding. Grade 316 has excellent corrosion resistance. Therefore, it is often used outdoors, or in particularly harsh environments such as marine environments.

The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

The 316L Round Bars are made up of the low carbon version of the 316 grade stainless steel alloy. It has a maximum carbon content of only 0.03%, whereas it is 0.08% for the 316 grade ss. The 316L ss round bars offers better corrosion resistance and is more suitable for high temperature applications.

Stainless steel forged bars are harder and more durable. They are versatile and therefore available for a wide range of services.

Grade 304 is a versatile, popular and economical choice for many applications. However, having said that, the uses and uses of 316 stainless steel rods are very different from 304 stainless steel rods. First of all, ASTM a276 Type 316 Round Bar is ideal for use in marine environments as it is resistant to seawater and salt water and solutions different from Grade 304 will not rot in marine environments.