ASTM A276 S31803 round bar 2205 steel bar

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

Super Duplex Steel have the benefit as it counterpart ¨C it has lower alloying costs when compared with austenitic grades and ferritic.

Alloy 2205 Pipe has a melting point of 1350 degrees C. These pipes have a wall thickness between 0.3mm to 50mm.

UNS S32750 or DIN W.Nr. 1.4410, Duplex 2507 is a super duplex stainless steel conutaining 25% chromium, 4% molybdenum and 7% nickel, designed for demanding applications requiring exceptional strength and corrosion resistance, such as chemical Process, petrochemical and seawater equipmenut.

Duplex stainless steels have a microstructure which is 50% ferritic and 50% austenitic. This composition gives them a better strength than either ferritic or austenitic steels. Further details about this topic are given below (see ASTM A790 pipes).

The microstructure and composition of the duplex 2205 alloy provides corrosion resistance superior to Type 316 or 317 in many environments, and its minimum yield strength is more than double that of conventional austenitic stainless steels.

Debido al peso ligero de la tuberia soldada ASME SA790 de acero duplex UNS S32205, se utiliza en procesos de ingenieria aeroespacial y nuclear. Tambien se utiliza en la industria automotriz y de la construccion debido a su alta resistencia al desgaste y capacidad para trabajar en ambientes de alta tension.

We are a manufacturer of Stainless Steel Round Bar, Formed Steel and Rebar, we supply bars such as 304, 304l, 316, 316l and 347. We are proud to have the largest share of stainless steel forming steel in the country.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

Some of the advantages of using super duplex fasteners include its physical and excellent mechanical properties such as high yield strength, excellent tensile strength, high impact strength and excellent corrosion resistance.

Astm A182 F51 flange is made up of carbon, chromium, manganese, silicon, phosphorus, sulfur, nickel, nitrogen, molybdenum and iron.

The inclusion of chromium imparts good corrosion resistance to austenitic grade 304. However, increasing the chromium content to about 25%, as in the case of 2205 duplex stainless steel pipe makes the alloy resilient across several media.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2205 is also more formable under pressure than other ferritic grades. The greater toughness of this grade also outweighs most of its concerns.

There are components of duplex 2205 fasteners available such as studs, set screws, bolts, washers and nuts. Whenever you specifically consider duplex stainless steel 2205 gaskets, it can be of great benefit for different types of critical industrial applications often found in harsh environments. Almost all types of 2205 stainless steel gaskets will provide a never-ending supply and excellent range of service for different applications such as valves or nuclear, seawater, offshore buoyancy and petrochemical, pumps, etc.

S32760 super duplex stainless steel is more resistant to pitting and crevice corrosion than regular austenitic or duplex stainless steels and is suitable for use in corrosive environments. This is due to higher additions of chromium, molybdenum and nitrogen.

We manufacture and supply bar stock for machined, forged and cold formed Duplex 2205 Nuts. We can manufacture and supply Duplex 2205 nuts in imperial sizes from M2 to M150 and 1/4″ to 6″. The most commonly used nuts are heavy hex nuts, flange nuts, cap nuts, set nuts, etc. We can supply these duplex 2205 nuts with minimal lead time.

The corrosion resistance comes from the addition of alloying material, mostly the chromium content. The ASTM A790 Pipes are resistant to pitting corrosion and crevice corrosion. The pipes could also be electric fusion welded.

In the annealed condition, S31803 contains approximately 40-50% ferrite. S31803 is often referred to as the workhorse grade and is the most widely used grade in duplex stainless steel pipes. The use of S31803 stainless steel pipe should be limited to temperatures below 600¡ãF.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

Heat and product analysis is to be performed on the SA 789 Alloy 2205 Pipe Material.

Super Duplex Stainless Steel 1.4410 Nuts?is a super duplex stainless steel with 25 percent chromium, 4 percent molybdenum, and 7 percent nickel. High molybdenum, chromium and nitrogen content in?Super Duplex 2507 Hex Nuts?help the material withstand pitting and crevice corrosion.?

Preheating of UNS S32750 Super Duplex Fasteners is not necessary except to prevent condensation on cold metal.

Some of the typical applications of duplex steel grade 2205 are oil and gas exploration, processing equipment, transport, storage and chemical process, high chloride and marine environments, paper machines, liquor tanks, pulp, and paper digesters.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Thread friction between the nut and bolt creates a strong, steady and even force holding the componenuts together. The most commonly used ASTM A182 UNS S32205 fastener nuts are regular hex nuts. At the same time, duplex stainless steel fasteners are strong and corrosion resistanut, combining the healthy properties of ferrite and austenite. The material also has a 90ksi minimum tensile strength and a 65ksi minimum yield strength. 2205 duplex stainless steel bolts have an elongation of 25% and a hardness of 217HBW.

Duplex UNS S32750 coils have very low corrosion rates under very high corrosive conditions.

At temperatures above 300¡ãC, the brittle trace components of 2205 precipitate, and at temperatures below -50¡ãC, the trace components undergo a ductile-brittle transition; therefore, this grade of stainless steel is not suitable for use at these temperatures.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

The 2205 gasket is known as a duplex stainless steel gasket because it has a combination of ferrite and austenite and can be made into fasteners due to its high corrosion resistance. It has higher corrosion resistance than 316 stainless steel and is also highly resistant to stress corrosion and chloride cracking. 2205 has been determined to be cost effective because it is only 5% nickel and is significantly less expensive than Hastelloy C276 fasteners.

2205 is the most widely used duplex (ferritic/austenitic) grade of stainless steel. It is used due to its excellent corrosion resistance and high strength. Over the years, many steel suppliers have made improvements to the standard duplex S31803 composition, and the resulting restricted composition range was recognized as UNS S32205 in 1996.

2205 duplex pipe is not recommended to be used at a temperature above 572¡ãF. Due to the presence of higher chromium, molybdenum, and nitrogen contents, 2205 duplex stainless steel tubes demonstrates superior corrosion resistant properties in comparison to the more conventionally used austenitic stainless steel grades 316 and 316L in most environments.