astm a276 square flat 316ti 80mm round stainless steel bar

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

17-7PH provides high strength and hardness with minimal deformation under heat treatment. The alloy has good formability and excellent fatigue properties with good corrosion resistance.

ASTM A479 347 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

254 SMO Bar is a high alloyed austenitic stainless steel grade. This stainless steel grade has been developed for use in seawater and other media containing corrosive chlorides.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

This stainless steel round bar is an age-hardening martensitic stainless steel that combines high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short, simple low temperature treatment. Unlike conventional martensitic stainless steels.

ASTM A276 310 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless Steel 904l Round Bars is the lower carbon version of Stainless Steel which has numerous beneficial properties like durability, resistance, and flexibility.

431 is a high chromium, low nickel, high hardenability martensitic stainless steel with high strength and good corrosion resistance. Compared to other 400 stainless grades, 431 stainless steel is designed to improve corrosion resistance and toughness, especially in quench hardened stainless steel. The 431 will perform well in marine environments as well as in aerospace applications such as aircraft fasteners and accessories. This alloy has great impact strength at high hardness levels.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Low temperature resistance properties of stainless steel bars
Low temperature resistance is measured by ductility or toughness at subzero temperatures. At low temperatures, the tensile strength of austenitic stainless steels is significantly higher than ambient temperature. They also maintain excellent toughness. Ferritic, martensitic and precipitation hardening steels should not be used at sub-zero temperatures. The toughness of these grades drops significantly at low temperatures. In some cases, this drop occurred near room temperature.

ASTM A479 310s Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

The ASTM A479 specification covers hot-rolled and cold-rolled stainless steel bar, including round, square, and hexagonal, as well as hot-rolled or extruded shapes for boiler and pressure vessel construction, such as angles, tees, and channels. Four grades of stainless steel are available, including austenitic, austenitic-ferritic, ferritic and martensitic grades. Mechanical properties, such as tensile strength, yield strength, elongation, and hardness, shall be determined for specimens subjected to normalized, tempered, annealed, and quenched conditions.

Grade 310sS (UNS S310s08) is used when the application environment involves wet corrosive agents in a temperature range lower than what is normally considered “high temperature” service. The lower carbon content of 310sS does reduce its high temperature strength compared to 310s.

Applications for 416 stainless steel rods are pump shafts, valve components and automatic screw machine parts. Its properties are that this is considered a “free processing variant” of 410, with effective corrosion resistance to natural food acids, alkaline salts, water and most atmospheres.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

HT PIPE is one of the well-established manufacturers and suppliers of Stainless Steel 316Ti Bar.

ASTM A479 Round Bar has one important thing going for them: they are made from stainless steel. Stainless steel is corrosion resistant and the stainless steel which has higher alloy content are able to withstand the onslaught of acids, “chlorine bearing environments” as well as solutions containing alkaline.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Austenitic stainless steels are characterised, in the most common variants, for a wide range of applications
Weldable and formable due to manganese, nickel and nitrogen chemistry, balancing moderate strength, hardness (cannot be heat treated but can be “work hardened”), ductility and toughness, relatively susceptible to SCC unless nickel content is increased, Higher molybdenum content can enhance resistance to pitting and crevice corrosion (CCR).

For stainless steels 304, 316, 304L,347, some alloys are better suited for welding, or easier to machine than others, generally austenitic steels are easier to weld than most other alloys, but there are exceptions depending on the stainless steel you may need Types of finishes and treatments.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

The absolute roughness of hot rolled stainless steel round bars is higher than that of drawn bars. This is not a problem when rebar is only used for strength and corrosion resistance properties. But when the bar is used for aesthetic applications and outdoor fixtures, cold drawn stainless steel round bar is preferred because of its smooth surface and less absolute roughness. Bars can also vary in size. Typical range is 5mm to 450mm radius.

Stainless steel rods are popular for their corrosion resistance and are widely used in the construction of building foundations, bridges and marine environments. 304/304L Stainless Steel Round, an economical grade stainless steel ideal for all applications requiring strength and superior corrosion resistance.

Stainless steel bar offers a range of unique advantages for numerous industries and applications around the world. The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.