astm a276 stainless steel round bar square bar flat bar

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

Martensitic stainless steels are characterized by a higher carbon content than ferritic alloys, allow tempering (hardness treatment), are stronger but less resistant to corrosion than most other stainless steel types, are not particularly formable or formable Welded, more commonly used for stainless steel bars and other long products than plates.

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

Grade 304 stainless steel is the standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

Stainless steel round bars are available in three grades. 304 is the most common grade with easy weldability, good formability and corrosion resistance. Grade 316 offers excellent corrosion resistance, making it ideal for harsh environments such as salt water or heavy industrial areas. Like grade 304, it is also easy to weld, but more difficult to machine. Finally, grade 303 is easier to machine, drill and cut than other grades. However, it is not as suitable for welding as grades 304 and 316.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

Applications for ASTM a276 Grade 304l round bars must be limited to those applications that require these bars to be joined by welding and do not require excellent tensile strength properties.

The degree of magnetic responsiveness of stainless steel is determined by its microstructure, so certain types of stainless steel alloys can be manipulated during the processing stage to make them more or less magnetic.
Generally, austenitic stainless steels are considered non-magnetic and suitable for magnetically sensitive applications, while other types of stainless steel alloys (including duplex, ferritic and martensitic) can be made with higher magnetic properties

Although stainless steel construction has been around since the 60s, it is only in recent decades that the industry has shown great interest. The main reasons are small quantity, irregular consumption, small supply, long delivery time, high price and little knowledge of materials. HT PIPE focused on these market deficiencies in the early 90s and achieved some significant changes by strengthening the supply network and introducing new manufacturing techniques. Today, HT PIPE is a well-known supplier and shareholder of stainless steel structural profiles and stainless steel bright strips.

Stainless steel round bars are also sometimes called bright bars or solid bars. Since it is made of stainless steel containing chromium, this product has excellent corrosion resistance. Those grades with higher alloy content have the added benefit of being highly resistant to acid, chlorine and alkaline solutions. These properties, combined with inherent strength and longevity, have helped make stainless steel round bars popular in industries such as transportation, construction, automotive, and petrochemicals.

The advantageous properties of stainless steel can be seen compared to standard plain carbon low carbon steels, like 304, 304l, 316, 316l and 347. Although stainless steel has a wide range of properties, in general, compared to mild steel, stainless steel has: higher corrosion resistance, higher low temperature toughness, higher work hardening rate, higher hot strength, more High ductility, higher strength and hardness, more attractive appearance and low maintenance.

316 stainless steel has a better resistance to chemicals and chlorides (like salt) than ss 304. When it comes to applications with chlorinated solutions or exposure to salt, grade 316 stainless steel is considered superior, so it is usally called marine grade stainless steel.

ASTM A276 316 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

SS 316/316L/316Ti round bars/rods are made from chemical compositions such as carbon, nickel, copper, chromium, titanium, iron and manganese. These rods and rods are designed with physical and mechanical properties such as density, yield strength, tensile strength, elongation, thermal conductivity, electrical conductivity, modulus of expansion, and electrical expansion.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

The ASTM A479 specification covers hot-rolled and cold-rolled stainless steel bar, including round, square, and hexagonal, as well as hot-rolled or extruded shapes for boiler and pressure vessel construction, such as angles, tees, and channels. Four grades of stainless steel are available, including austenitic, austenitic-ferritic, ferritic and martensitic grades. Mechanical properties, such as tensile strength, yield strength, elongation, and hardness, shall be determined for specimens subjected to normalized, tempered, annealed, and quenched conditions.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Stainless steel WNR 1.4301 wire is known for its amazing tensile strength and fabric power and is available in a variety of sizes according to customer requirements. They are the product of the best materials and primary strategies that conform to the established norms of the industry. In our assortment we have round rods with special type of ends to ensure short and tight fittings in pipes. Furthermore, in addition to custom-designed specifications, we also offer a wide variety of round bars to meet customers’ software needs in the most green way possible.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

Because of the potential for water ingress, exposure to changing weather conditions, exposure to chemicals, chlorides and acids. So stainless steel bar is an excellent choice.

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

Stainless steel black bars are manufactured through a forging process. Here, the steel passes through several rolls and raw materials such as billets and blooms are heated to around 1200 degrees Celsius. It exceeds the recrystallization temperature of steel.

Generally, SS ASTM A479 Forged Round Bars are available or supplied in any of the following conditions, i.e. normalized, tempered, annealed and quenched. However, in all stainless steel classes, alloys that fall into the austenitic class such as A479 316 Type alloys, in addition to being tested for corrosion resistance, are also heat treated.