astm a276 sus304 uns s30400 bar price bars 304l 8mm 304 stainless steel round rod

Depending on the nature of the application, bars and rods can be used in industry. Stainless steel bars and bars are divided into hot rolled and cold rolled, but cold rolled bars are accurate in size and have the largest supports, supports, motors, etc.

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

The SS 304L electrode is a variant of Type 304 with a lower carbon content to improve weldability and reduce the risk of reduced corrosion resistance around the weld. For severely corrosive environments, lower levels of SS 304L Bars were chosen due to its excellent resistance to intergranular corrosion. The industries that mainly use this level are nuclear power, general engineering, etc.

The benefits of using stainless steel 304/304L round bars include low carbon content, which eliminates carbon precipitation during welding. Stainless steel 304L round bars have higher tensile yield strength and have low temperature properties that respond well to cold work hardening.

Industrial stainless steel bar products include several different shapes including flat, hexagonal, round and square and materials such as 304, 304l, 316, 316l and 347. These types of stainless steel bar products have enhanced corrosion resistance and are available in a variety of alloys and finishes, making them useful in an almost unlimited number of industrial applications.

The 316L Round Bars are made up of the low carbon version of the 316 grade stainless steel alloy. It has a maximum carbon content of only 0.03%, whereas it is 0.08% for the 316 grade ss. The 316L ss round bars offers better corrosion resistance and is more suitable for high temperature applications.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless steel bars are manufactured through a forging process. Here, the steel passes through several rolls and raw materials such as billets and blooms are heated to around 1200 degrees Celsius. It exceeds the recrystallization temperature of steel.

Stainless Steel 310 Round Bar is a robust austenitic stainless steel grade bar used in a variety of industries. Applications include chemical, brewing, petrochemical, food processing and many other industries. Stainless steel 310 round bars are available in different sizes according to EN, DIN, JIS, ASTM, BS, ASME and AISI codes.

Because Alloy 316 is extremely ductile, it can be easily formed into a variety of shapes. While stainless steel 316 round bars can be hot worked, many manufacturers prefer cold worked bars.

Stainless steel round bars can be easily ordered in various sizes. Simply select the desired steel grade and we will supply bars in lengths from 500mm to 3m and diameters from 3mm to 50mm. We can even offer you an ordering option for metric or imperial measurements.

Grade 310sS (UNS S310s08) is used when the application environment involves wet corrosive agents in a temperature range lower than what is normally considered “high temperature” service. The lower carbon content of 310sS does reduce its high temperature strength compared to 310s.

Austenitic stainless steels are characterised, in the most common variants, for a wide range of applications
Weldable and formable due to manganese, nickel and nitrogen chemistry, balancing moderate strength, hardness (cannot be heat treated but can be “work hardened”), ductility and toughness, relatively susceptible to SCC unless nickel content is increased, Higher molybdenum content can enhance resistance to pitting and crevice corrosion (CCR).

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.

Stainless steel rods are popular for their corrosion resistance and are widely used in the construction of building foundations, bridges and marine environments. 304/304L Stainless Steel Round, an economical grade stainless steel ideal for all applications requiring strength and superior corrosion resistance.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

Grades 303 and 304 are interchangeable in many cases, but the composition of each grade is slightly different, making either of them the obvious choice for certain applications.

This rod is also known as a stainless steel rod. The application of the bar depends on the requirements of the application and the grade of the material. There are different specifications that also specify production and application types. ASTM A276 Stainless Steel Bar is the specification for hot rolled and cold drawn bar, except for forged bar. It can have different shapes like circle, square, hexagon and other extruded shapes.

254 SMO Bar is a high alloyed austenitic stainless steel grade. This stainless steel grade has been developed for use in seawater and other media containing corrosive chlorides.

Features of ferritic stainless steel bars are: chromium base, typically less than 0.1% carbon, increased resistance to harsh environmental conditions, increased resistance to stress corrosion cracking (SCC), greater susceptibility to intergranular corrosion, and increased susceptibility to intergranular corrosion at very low Brittle at temperature, most often used for fairly thin sheets or pipes, since welds are not particularly tough.

Stainless steel round bar, as the name suggests, is a product made of different grades of stainless steel material. Depending on the grade of stainless steel, they can be used in various industries. These round bars have high strength, and due to their high chromium content, they are effectively resistant to corrosion.

Type 347 stainless steel has slightly improved corrosion resistance in strongly oxidizing environments than Type 321 stainless steel. Type 347 is stabilized with columbium and is more suitable for aqueous and low temperature environments due to its good resistance to intergranular corrosion. Both 347 and 321 have good resistance to polythionate stress corrosion cracking encountered in refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. For 1500¡ãF.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Grade 304 is essentially an all-purpose alloy, it is tough, has good corrosion resistance and is easy to machine. The alloy also has excellent welding properties. Stainless steel round bars are fairly versatile parts and can be used in a variety of applications.

Since a276 grade 316 rods are resistant not only to acetic acid but also to phosphoric acid, they are part of equipment used in fertilizer manufacturing, textile processing, and the pharmaceutical industry. Another use for ASTM A479 Grade 316 bars is that they can be used as components in the food and beverage industry because the alloy is recognized as a hygienic and non-toxic alloy.

316 stainless steel round bar is a type of stainless steel rod that is used in a variety of applications. It has excellent corrosion resistance and a strength-to-weight ratio. In addition to its many advantages over other types of steel bars, 316 stainless steel round bar stock can withstand high temperatures without losing its shape or properties.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.

SS 304L Square Bar has a multipurpose steel section which is mainly used for manufacturing and repairs. It is a part of our light and re-rolled section, making it suitable for everyday commercial projects.

The degree of magnetic responsiveness of stainless steel is determined by its microstructure, so certain types of stainless steel alloys can be manipulated during the processing stage to make them more or less magnetic.
Generally, austenitic stainless steels are considered non-magnetic and suitable for magnetically sensitive applications, while other types of stainless steel alloys (including duplex, ferritic and martensitic) can be made with higher magnetic properties

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements