astm a276 tp410 stainless steel angel bar in China

The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

As a stainless steel bar grade supplier, HT PIPE offers bar products and services. Stainless steel is not a single material, but a name for a family of corrosion-resistant steels. Like many scientific discoveries, the origin of stainless steel was an accident. In 1913, Sheffield, England, Harry Brearley was working on the development of a new steel alloy for gun barrels. He noticed that some of his samples did not rust and were difficult to etch. These alloys contain approximately 13% chromium. The first application of these steels was in cutlery, for which Sheffield subsequently became famous. Concurrent work in France led to the development of the first austenitic stainless steels.

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.

Characteristics of 304: As a heat-resistant grade, 304 stainless steel bar has good corrosion resistance to many chemical corrosive agents and industrial environments. And with good formability, 304 can be easily welded by all common methods. An ultra-low carbon variant called 304L avoids harmful carbide precipitation from welding. This variation provides the same corrosion resistance as 304, but with slightly lower mechanical properties.

ASTM is the American Society for Testing and Materials, and A479 is “Standard Specification for Stainless Steel Bars and Sections for Use in Boilers and Other Pressure Vessels.” This general supply specification defines composition and mechanical property requirements for various stainless steel bars, whether hot or cold worked, round, hexagonal or square, and hot rolled or extruded shapes such as angles, tees and channels . It also includes basic details on sampling and certification requirements, product marking and particle size requirements.

Considered for applications involving boiler and pressure vessel construction, martensitic grade SS A479 Type 410 bar offers good corrosion resistance in addition to its high strength and hardness properties. On the other hand, grade 316 ASTM A479 forged bar is the best choice for marine applications.

ASTM A276 347 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Stainless steel black bars are manufactured through a forging process. Here, the steel passes through several rolls and raw materials such as billets and blooms are heated to around 1200 degrees Celsius. It exceeds the recrystallization temperature of steel.

Grade 310sS (UNS S310s08) is used when the application environment involves wet corrosive agents in a temperature range lower than what is normally considered “high temperature” service. The lower carbon content of 310sS does reduce its high temperature strength compared to 310s.

Austenitic stainless steels shall be heat treated and subjected to corrosion tests. The round bar rolling process takes place as the stainless steel is placed into the analysed continuous shape mill, which is released in the first eight mill stands. Controlling the raw material (dimensions, surface, number of melts) before rolling, then heating in walking beam furnaces according to the technology of heating steel grades. When heated to the proper temperature, it is subjected to the descaling action created by the heating process. The next stage is the technical operation of single-stand rolling. After the hot rolling process, the product obtained is cooled to ambient temperature. melting times), and then heated in a walking beam furnace according to the steel grade heating process. When heated to the proper temperature, it is subjected to the descaling action created by the heating process.

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.

Stainless steel is not particularly ductile or ductile, certainly not heavily annealed, but quite suitable for welding. Stainless steel bars are hygienic, low maintenance and non-reactive with many substances, and importantly, this includes most foods ¨C stainless steel does not contaminate taste or color, which is why it is so commonly used in kitchen settings and cookware.

Grade 310 stainless steel, combining excellent high temperature performance with good ductility and weldability, designed for high temperature service. In the absence of reducing sulfur gas, it resists oxidation in continuous operation at temperatures up to 1150¡ãC. It can also be used for intermittent service at temperatures up to 1040¡ãC.

Like other austenitic grades, these grades have excellent toughness even down to low temperatures, although other grades are often used in this environment.
Grade 310sL (and a proprietary version of this grade), a version of the 310s with a maximum carbon content of 0.03%, is sometimes used in very specific corrosive environments, such as urea production.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless Steel 310 Round Bar is a robust austenitic stainless steel grade bar used in a variety of industries. Applications include chemical, brewing, petrochemical, food processing and many other industries. Stainless steel 310 round bars are available in different sizes according to EN, DIN, JIS, ASTM, BS, ASME and AISI codes.

A403 WP316h A403 S31635 A403 S34709 Round bars are available in 4 stainless steel grades: ferritic, austenitic, martensite and austenitic-ferritic. These different grades are used to manufacture different kinds of round bars, such as A403 WP321 A403 S31008 A403 S31609 A403 WP321h, which are used in pharmaceuticals, hydrometallurgy, seawater treatment, heat exchangers, food and beverages, etc. A403 S30403 A403 S31603 A403 S34700 is also used in the construction of pressure vessels and boilers.

SS 316/316L/316Ti round bars/rods are made from chemical compositions such as carbon, nickel, copper, chromium, titanium, iron and manganese. These rods and rods are designed with physical and mechanical properties such as density, yield strength, tensile strength, elongation, thermal conductivity, electrical conductivity, modulus of expansion, and electrical expansion.

904l stainless steel round bar is an austenitic grade alloy. The added molybdenum content in stainless steel 904L square bar alloy gives it excellent resistance to localized corrosion such as pitting and crevice corrosion if compared to alloy grade 316l.

Grade 304 stainless steel is the standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

Stainless steel forged bars are harder and more durable. They are versatile and therefore available for a wide range of services.

Stainless steel bar offers a range of unique advantages for numerous industries and applications around the world. The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.

This stainless steel round bar is an age-hardening martensitic stainless steel that combines high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short, simple low temperature treatment. Unlike conventional martensitic stainless steels.

F55 round steel is produced by a combination of rolling and forging. They are used for application flame hardening where the surface hardness needs to meet the general standard of ASTM A182 F55. Another bar standard, UNS S32760 F55 Rods, has a high fatigue strength of 450 MPa and a modulus of elasticity of 200 GPa.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

ASTM A479 forged bar is corrosion resistant and resistant to alkaline solutions. That’s why they are used in chlorine and acidic environments. Because of all these properties of ASTM A479 forged bar, it can be used in machining, construction and other applications