astm a333 gr6

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

ASTM A194 Class 2h bolts are carbon base steel heavy duty hex nuts. Sa194-2h material is a common high strength nut. This specification ASTM A194 Class 2h washers are typically used in conjunction with the following fastener standards – A193 Class B7, A325, A490.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

ASTM A335 grade P91 tubing contains small amounts of other alloys such as aluminum, niobium, nickel, nitrogen, titanium, vanadium, and zirconium. These pipes are based on the A335 standard, but when forged or drilled, the pipes can also meet the A369 standard. These pipes have a minimum yield strength of 415 MPA and a minimum tensile strength of 585 MPA.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

A182 Class F1 Socket Weld Flanges were originally developed for small high pressure pipelines. They have the same static strength as slip-on flanges, but have 50% higher fatigue strength than double-welded slip-on flanges.

They have a minimum yield strength of 105ksi. There are different types of bolts and bolts for different types of applications such as ASTM A193 gr b7 hex bolts.

ASTM A182 Alloy Steel Forged Flanges are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.5, B16.47 and B16.48 standards.

ASME SA 335 grade P22 alloy steel pipe can withstand high pressure and high temperature. Therefore, ASTM A335 P22 pipe is used in applications that need to operate at high pressure and high temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

B8M Grade 1 fasteners require carbide solution treatment, while Grade 2 fasteners require additional strain hardening operations to increase strength and reduce susceptibility to wear.

While chromium is an important alloying agent in a335 P91 piping, it is known to prevent corrosion and has a high resistance to oxidation at high temperatures. Since these pipes are surface treated or coated, they are also protected against corrosion. Surface coating can be accomplished by various techniques such as passivation, phosphating, oil immersion, varnishing and shot peening.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P150

The alloy steel slides on these elbows can be machined and polished in a stress-relieved condition.

One of the top stocks of ASTM A182 alloy steel F5 flanges for a variety of industrial applications. With a talented team of professionals, we are committed to supplying the highest quality ASTM A182 Alloy Steel F5 Flanges, widely used by customers in suitable applications.

We offer a variety of ASTM A182 F12 alloy steel round bars to choose from, and these forged bars can be customized according to customer requirements. They are widely used in automotive and other fields due to their excellent quality and unparalleled functionality.

ASTM A193 Grade B7 specification covers requirements for high tensile alloy steel bolting material for use in high temperature or high-pressure service and other special purpose applications.

Alloy and stainless steel pipes are ideal for high-quality applications, selected for their durability, machinability, and superior corrosion resistance. We supply materials for a variety of industries such as: food processing, pharmaceuticals, energy, plant maintenance, and oil and gas exploration.

We are also a supplier and exporter of Alloy Steel ASTM A182 F5 Butt Weld Flanges for high pressure hydraulic systems.

When the F11 flange is heat treated, the alloy steel F22 flange is formed. These flanges have a tensile strength of 655 MPa and a yield strength of 517 MPa.

As one of the leading Alloy Steel Flanges Manufacturers in China we supply all different types of flanges in all material grades. Please contact us for your alloy steel flange needs.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

We use tested and qualified raw materials to improve the machinability of alloy tubes. These are processed through a metallization process that refines structural and material defects.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

The composition of A335 P91 material contains carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, vanadium, nitrogen, nickel, aluminum, niobium, titanium and zirconium. There are two kinds of seamless pipes and welded pipes. Seamless pipe is drawn from a single raw material billet, while ASTM A335 Gr P91 Welded Pipe is welded from strip or sheet. Welding can be helical or longitudinal from one end to the other to produce the tube. The minimum yield strength of the pipe is 415MPa and the minimum tensile strength is 585MPa.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

Unlike the bends, the elbows can reduce the pressure applied on the walls when turning the fluid flow direction.Fittings made from WPHY 52 material are known to have a long work life, durable, tough and hard. The WPHY 52 properties make these fittings a perfect cost saving solution for a variety of industries.

The A335 P91 chrome tube composition makes these high mechanical properties possible for the material. P91 steel pipe materials can be normalized and tempered during the production process, and can also be quenched and tempered. These methods increase the strength of the material. Additionally, these pipes are drawn and seamless.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

B7 y B7M se trataran termicamente mediante enfriamiento rapido y revenido en un medio liquido. Para los sujetadores B7M, el tratamiento termico final, posiblemente una operacion de templado si se realiza a un minimo de 1150 ¡ãF [620 ¡ãC], debe realizarse despues de todas las operaciones de mecanizado y formacion, incluido el laminado de roscas y cualquier tipo de corte. Preparacion de la superficie que permite realizar pruebas de dureza, evaluacion no destructiva o tension ultrasonica de pernos.

Since these are heavy duty tension nuts, they are used in high vibration and high stress applications such as aircraft engine parts and automotive engine parts. ASTM A194 Class 2h material consists of all classes of carbon, manganese, phosphorus, sulfur and silicon.

We are stocking 22 WPHY 52. Petromet is distributor and dealer of Mss SP75 WPHY 52 Equal Tee, ASTM A860 WPHY 52 Reducing Tee in various sizes.

ASTM A194 specification covers carbon, alloy and stainless steel nuts for high pressure and/or high temperature service. American National Standard Heavy Duty Hex Series (ANSI B 18.2.2) shall be used unless otherwise specified. Nuts no more than 1 inch in nominal size shall conform to UNC Series Class 2B.

Alloying steels have added alloying elements such as manganese and nickel. These elements increase the strength, hardness and toughness of metals. Added elements make alloy steels ideal for demanding industrial applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Our alloy steel ASTM A182 F5 butt weld flanges can be used in auxiliary industrial high pressure services such as condensers, boilers, evaporators, heat exchangers and more.

Compared to other manufacturing process, ASTM A182 F22 Metal forging is mainly focused on producing some of the strongest manufactured parts. It¡¯s not just limited to iron and steel forging but as well as other metals also.

For the F5 flange, the creep strength of the chromium-molybdenum low alloy mainly comes from two sources: the solid solution strengthening of the matrix ferrite by carbon, molybdenum and chromium and the precipitation hardening of the carbides.