Astm A350 Lf2 Wn Sw Ansi 16.5 48 Inches Tapped Hole Blind Spect Flange

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

316 stainless steel pipe is the second most common stainless steel after 304. SS DIN 1.4401 / 1.4436 Rectangular Welded Pipe, ASTM A312 TP316 Pipe, 316 Rectangular Pipe, 316 Pipe typically contain 16% Chromium and 10% Nickel with added Molybdenum typically between 2-3%.

Precipitation hardening martensitic stainless steels have comparable corrosion resistance to austenitic grades, but can be precipitation hardened to higher strengths than other martensitic grades. The most common 17-4PH uses about 17% chromium and 4% nickel. The Lockheed-Martin Joint Strike Fighter was the first aircraft to use precipitation-hardenable stainless steel Carpenter Custom 465 in its fuselage.

AISI 904L threaded rods are further reduced to required lengths and chamfered as stud threaded rods when required to hold components such as flanges, valves, filters and other plumbing components together. Also, SS 904L threaded rod is a recommended austenitic alloy for functions where SS 316l or SS 317l cannot provide basic corrosion resistance.

Inconel fasteners, such as Inconel 600, 601, 625, 686, 718, 725 and X750 fasteners, are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures.

The thermal conductivity of ASTM B466 Cupro Nickel 70/30 seamless pipe is also very good. However, if a comparison is made between copper and alloys, both the thermal and electrical conductivity of the copper-nickel 70/30 tube decrease.

Stainless Steel 316L is an extra-low carbon version of the grade 316.

SS 304L 316L Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

We are a professional manufacturer and exporter of ASTM B366 WP20CB Pipe Fittings N08020 elbow, Alloy 20 Elbow Tee reducer Caps

Originally developed to combat seawater corrosion, AL6XN has expanded its role as a good mid-range corrosion resistant alloy. AL6XN screw is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL 6XN threaded rods are super austenitic AL 6XN threaded rods are super austenitic, made from an alloy containing limited carbon content of chromium, nickel and molybdenum. AL 6XN threaded rod is resistant to chloride stress corrosion cracking.

Alloy 310 (UNS S31000) is an austenitic stainless steel developed for high temperature corrosion resistant applications. The alloy resists oxidation up to 2010oF (1100oC) under mild cycling conditions. Due to its high chromium and moderate nickel content, alloy 310 is resistant to sulfidation and can also be used in moderate carburizing atmospheres.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Hastelloy C276 is one of the few grades resistant to wet chloride gas and chlorine dioxide.

The addition of chromium and molybdenum to a182 grade f9 enhances the corrosion resistance of the flange.

The SMO 254 Spectacle Blind Flange is considerably much stronger as compared to the standard or conventional austenitic grade alloys. The tensile strength of the Alloy 254 SMO is nearly two times that of grade 300 series stainless steel.

ASTM A240 Type 2507 Duplex Sheet is an alloy used in applications with high strength and corrosion resistance. The composition of the duplex 2507 sheet is approximately 25% chromium, 7% nickel and 4% molybdenum. This composition makes it resistant to crevice corrosion and chloride pitting.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

The best corrosion resistance for general corrosion is carbon steel LF3 round bar. Carbon steel LF3 threaded rods have excellent ductility and creep resistance. Carbon steel LF3 polishing rods have the greatest resistance to oxidation corrosion. The best welding and fabrication quality is found in carbon steel LF3 flat bars. Carbon steel LF3 bars are mainly used in the construction of skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

Incoloy 800-800H-800HT Nuts are nickel-iron-chromium alloys with excellent corrosion resistance in high temperature environments. Also known as UNS N08800 Fasteners, UNS N08810 Fasteners and UNS N08811 Fasteners, these assemblies are ideal for hydrocarbon processing, catalyst tubes and convection/cracking tubes in ethylene production for the oil/gas industry.

There are different types of fittings such as bends, tees, crosses, reducers, caps and the WPHY 52 Elbow.In sour service wells, when hydrogen sulphide gas reacts with water, the hydrogen molecule gets deposited either on the pipes or fittings.

For instance, the use of Carbon Steel ASTM A105 Fittings is prominent in those applications that involved not only environments where the temperatures are high, but also in those applications at room temperature.

INCOLOY alloy 926 (UNS N08926 / W. Nr. 1.4529 / INCOLOY alloy 25-6MO) pipe fitting is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments.

Stainless Steel 316 Slip On Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Alloy 718 Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

Inconel 718 alloy is used in large quantities in extreme environments, such as high-speed airframe components, cryogenic storage components, nuclear reactors, chemical processing, and gas turbine engine components.

304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It will experience pitting and crevice corrosion in warm chloride environments, and stress corrosion cracking above about 60 ¡ãC. It is considered to be resistant to pitting corrosion in water up to about 400 mg/L chloride at ambient temperature, decreasing to about 150 mg/L at 60 ¡ãC.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

ALLOY601 is a solid solution strengthened Ni-Cr-Fe alloy with additions of Al + Ti. And there are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges.

La tuberia 254 Smo se usa ampliamente en el tratamiento de agua de mar, procesamiento quimico, procesamiento de alimentos y produccion de petroleo. Tubo Smo 254 tambien se utiliza en sistemas de blanqueo de plantas de celulosa, desulfuracion de gases de combustion, lavadores y columnas de destilacion de tall oil.

The 21% chromium content is the key to extreme corrosion resistance and strength of the SA 182 f51 flanges. HT PIPE is a leading supplier and manufacturer of the flanges in various scales, shapes and types.