ASTM A403 WP304H elbow

The increased properties are obtained by adding aluminum and titanimum to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated thoughout the matrix.

ASTM A403 WP304H has a high carbon content in chemical compositions.ASTM A403 WP304H normally is used for the pressure piping systems of moderate and high temperature services. WP304H is a kind of heat and corrosion resistant steel.It has a good pipe bending,welding performance,heat and corrosion resistance,high rupture strength and stability,also the cold deformation ability is very good.It could be used up to 650¡ãC,oxidation temperature up to 850¡ãC.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The chromed duplex steel UNS S31803 is very resistant to welded joints and can easily fit into any length thanks to a wide range of sizes and shapes. Also known as WNR 1.4462, these fittings have long been used in a variety of industries such as oil and gas, chemical, pharmaceutical, paper, sugar and more.

Hastelloy X pipe bend is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress-corrosion cracking.

Duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of two phases, austenite (face-centered cubic lattice) and ferrite (body centered cubic lattice) in roughly equal proportions. They are designed to provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength than standard austenitic stainless steels such as Type 304 or 316.

904L (N08904, 14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low-carbon, high-nickel, molybdenum austenitic stainless acid-resistant steel, which is a proprietary material imported from French H¡¤S Company. It has good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride-containing media Excellent pitting corrosion resistance, as well as good crevice corrosion resistance and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 ¡ãC, and has good corrosion resistance in acetic acid of any concentration and temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

Stainless steel 304 fittings are one such type of pipe, offering high tensile strength, corrosion resistance and a flawless finish. Excellent corrosion resistance and reduced carbon content along with high strength make DIN 1.4301 AISI 304 long radius elbows suitable for applications requiring welding. It is a versatile alloy used in strongly corrosive electrical enclosures.

HT PIPE offers a full range of pipe fittings such as carbon steel reducers, carbon steel elbows, carbon steel tees, carbon steel crosses, carbon steel stub ends and carbon steel elbows. Our carbon steel or mild steel forged flange products include threaded flanges, butt weld flanges, slip flanges, socket weld flanges, blind flanges, lap flanges, plate flanges. We specialize in manufacturing flanges of special sizes and custom shapes for our customers.

Duplex derives a mixed microstructure containing equal amounts of austenite and ferrite. Ferritic alloys provide resistance to stress corrosion cracking, while austenitic alloys provide ease of manufacture and corrosion resistance.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

A pipe fitting can be called a pipe tee whenever it is a 3 way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions.

We never compromise on the quality and quantity standards and specifications to manufacture these duplex steel UNS S31803 butt welded pipe fittings. We are mass producing these duplex accessories using highly advanced technology and tools. Help our clients in emergencies or any emergency.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.

The alloy is used extensively in the chemical industry for its strength and corrosion resistance.

Inconel Tube Fittings can be easily elongated by 40% and still possess excellent workability. These fittings have a melting point of about 1413 degrees C and have a long service life. The Inconel 600 Buttweld Fittings can be produced by hot or cold rolling processes.

Grade 316 pipe bend is readily workable, by the standard methods of sheet metal working, with the exception that it cannot be oxygen cut. Plasma cutting is normal. The deep drawing capability of grade 316 is outstanding, because of its high austenite stability.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 WP11 pipe fittings mean the pipe fittings which material are ASTM A234 WP11,they are used for the pressure piping systems of moderate and high temperature services.ASTM A234 is the standard of butt welding pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WP11 is one of the steel grade in this standard.

It is not useful in oxidizing acids, such as nitric acid and nitrous.

L2S 90 degree elbows are 304 or 316L stainless steel with a polished finish (No. 7) featuring a butt weld x butt weld connection. This 90 degree elbow is used to change flow direction in many applications for the semiconductor, cosmetics, food, dairy and beverage industries.

Stainless steel 317 has high corrosion resistance. It is a molybdenum-containing austenitic stainless steel under this grade. Stainless steel 317 Socketweld union improves resistance to chemical attack. These sub-grade 317 fittings are low in carbon to provide resistance to sensitization during welding and other hot working processes.

A860 WPHY 42 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

ASTM A234 standard steel pipe fittings have been widely applied in pipeline systems, it includes carbon and alloy steel material.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

The buttwelded fitting are stronger and can be used for welding with ease. The Carbon Steel buttweld elbow is a buttweld fitting that is used to turn or change the direction of the pipeline.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.