ASTM A403 WP310S pipe fittings elbows

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel 304 fittings are made of 18/8 chrome-nickel alloy steel. The composition of the material contains 18% chromium and 8% nickel. This makes the material stronger, with a minimum yield strength of 215MPa and a minimum tensile strength of 505MPa.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM B366 pipe fitting is used to connect straight pipe sections, adapt to different sizes or shapes and for other purposes, such as regulating(or measuing) fluid flow. These fittings are maded as per application requirements in different outer diameter and inner diameter with specified surface. HT pipe is a global distributor of nickel alloy pipe fittings in different sizes. Our company is constantly executing regualr as well as customised order for pipe fittings for sectors like oil and gas, engineering, etc.

Grade 316 pipe bend is readily workable, by the standard methods of sheet metal working, with the exception that it cannot be oxygen cut. Plasma cutting is normal. The deep drawing capability of grade 316 is outstanding, because of its high austenite stability.

This feature is also particularly useful in procedures that use Nickel 201 fittings in the manufacture and processing of sodium hydroxide, which in turn is considered a special kind of caustic. Particularly unaffected by sodium hydroxide even at temperatures above 300 ¡ãC.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

Our products, such as Duplex Steel S31803 Butt Welded Pipe Fittings, are custom made to our esteemed customers’ requirements and manufactured with precision. We believe in timely delivery without compromise.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. While duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

The high-temperature plasticity of the experimental alloy added with trace amounts of Mg, Cr and Co is obviously improved, and it exhibits certain superplasticity. At 1010¡æ, the strain rate sensitivity index m is 0.32, and the maximum elongation is 240%.

Incoloy 800 Street Elbow is designed with female threads on one end and male threads on the other end. It allows pipes to connect with other pipes at an angle. The main advantage of this elbow is that it can be connected directly to other fittings without the need for fittings or short connecting pipes.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Duplex stainless steel fittings include the selection and preparation of pipes or tubes, joining them together in various ways, and locating and repairing leaks. It combines several beneficial properties of ferritic and austenitic stainless steels.

It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

We are also shareholders of carbon steel pipe fittings, such as carbon steel butt welding elbows, butt welding carbon steel crosses, butt welding carbon steel tees, butt welding carbon steel end caps, carbon steel butt welding short pipe ends, etc.

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Duplex Stub End Fittings¡ªDuplex steel stub ends are installed in pairs and mate with two lap flanges. The surface of the alloy stub end has a voice pattern serrated gasket surface to prevent leakage at the joint. Use stub ends to open up parts of the circuit for cleaning, inspection, or quick replacement, etc., without the need for re-soldering.

Type : Seamless / Welded.This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion.

The 316 stainless steel reducer is good to be used in water, marine and sea water applications to reduce the size of a pipe line. The ASTM A403 Grade wp316 tee is used to divide or connect two pipes with another pipe. The 316 grade of steel is also used for fittings in food grade applications. The ASME SA 403 WP 316 Pipe Cap is a unique type of fitting in that it closes a pipeline rather than connecting two parts together.

The Carbon Steel A234 WPB Smls Reducer is a seamless product that reduces the diameter of the pipeline.Unless specified for carbon steel plates or sheet, the steel may be made to either coarse grain or fine grain practice. Which ASTM A234 WP9 shall be made to fine grain practice.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

This product is suitable for the stainless steel pipe system in dairy, food, beer, beverage, pharmaceutical, cosmetics and other industries.

All kinds of pipe products have DIN, ISO, 3A, SMS, BS, IDF, DS, BPE standard. And pipe fitting: 45¡ã/90¡ã/180¡ãbend series, tee/cross series, concentric(eccentric) series make your pipeline system free connectivity. Each series pipe fittings have weld, clamp, thread and flange four common install ways with your pipe system standard connections.

Carbon steel pipes are known for their ability to withstand high temperatures and are ideal for steam pipes. However, if you are trying to work in extreme climatic conditions (for example, transporting cryogenic liquids), you must use a different grade of pipe.

ASTM A234 Alloy Steel WP12 Pipe Fittings, which is a low-carbon plain chromium Ferritic stainless steel. Along with this, these ASTM A234 Alloy Steel WP12 Butt Weld Fittings are widely used for fabrication work and are available at industry leading prices.

They can be annealed and hardened through a cold working process. They can withstand service containing nitric and phosphoric acids and the resulting oxidation. We provide third-party inspection services to large companies. We also offer a variety of Stainless Steel ASTM A403 WP316L Fittings such as SS WP316L Tee, WP316L SS End Cap, SS 316L Reducer, SS 316L Cross, SS 316L Elbow, SS 316L Stub End, etc.