ASTM A403 WP316 pipe fittings reducers

429 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates. The material grade can be SS 429, Type 429, WNR 1.4001, UNS S42900, AISI 429, Grade 429

Duplex Elbow Fittings – Duplex steel elbows are installed between two lengths of pipe or tubing, allowing a 180¡ã, 90¡ã or 45¡ã change in direction. End machining is used for butt welding when the two ends are different in size, called a reducer or a reducer elbow. Fitting elbows are available as 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D radius 180¡ã elbows, 90¡ã elbows or 45¡ã elbows as short and long radius elbows.

Duplex Steel Buttweld Fittings demonstrate better localized corrosion resistance in comparison to both grade 316L and 317L. Hence these duplex steel fittings are used in applications involving several key industrial fields such as chemical plants, seawater pump, seawater desalination plant, and so on.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

AISI 316 and 316L stainless steels offer increased resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. 316L has a maximum carbon content of 0.03 and is suitable for welding, while 316 has a moderate carbon content.

Grade 825 Incoloy alloy used to make butt welded pipe fittings has high corrosion resistance. It contains a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic structure.

In the annealed condition, stainless steel 317L fittings are non-magnetic. Although fittings manufactured from Grade 317L cannot be hardened by heat treatment, the material will harden by cold working. 317L fittings can be easily welded and machined by traditional shop fabrication methods. No post weld heat treatment is required for these fittings. Generally, grade 317 stainless steel can be welded using fusion welding and resistance welding methods, but for these 317L stainless steel fittings, oxyacetylene welding is not the preferred method. For best results, use 317L filler metal or AWS E/ER317 or .

AL-6XNalloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

UNS S31254 is an alloy material with anti-corrosion effect, its density is 8.0g/cm3, and the melting point is 1320-1390¡æ. High molybdenum content and high chromium and nitrogen content make UNSS31254 extremely good resistance to pitting and crevice corrosion. The addition of copper improves corrosion resistance in certain acids. In addition, UNSS31254 has good resistance to stress corrosion cracking due to its high nickel content and high chromium and molybdenum content.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASME B16.9 Duplex Stainless Steel Seamless Fittings range from sch5 to sch160 and XXS. Welded fittings with wall thicknesses up to 50 mm. Because the duplex material is strong and resistant to acid and chloride ion corrosion, fittings such as ASTM A815 UNS S32205 Long Radius Elbow are used in seawater, marine and highly corrosive applications such as the oil, oil and gas and offshore oil drilling industries.

Stainless Steel 304 Pipe Fittings are made up of 18/8 chromium nickel alloy steels. The SS 304 Elbow has 18% chromium and 8%nickel in its composition. This makes the SS UNS S30400 Buttweld Fitting to be stronger with 215MPa minimum yield strength and 505MPa minimum tensile strength. The combination makes Stainless Steel 304 Buttweld Pipe Fittings corrosion resistant and high temperature capable up to 889 degrees Celsius.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

ASME B16.9, ASME B16.28. These Stainless steel 304/ 304L tube/pipe fittings have special quality finishing and duress for long life, high pressure and zero defects.

ASTM A234 WP91 is low content alloy steel,so its hardness is higher than carbon steel,so its have better performance for the abrasive resistance and corrosion resistence.So the ASTM A234 WP91 pipe fitting is more widely used for the machine parts compared with carbon steel.

INCONEL (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications requiring corrosion and heat resistance. The alloy also has excellent mechanical properties and has an ideal combination of high strength and good machinability.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel 347 reducer has tensile strength and minimum yield strength. Stainless Steel 347 Stub End Fittings are a non-magnetic grade that cannot be hardened by heat treatment, are typically used in the annealed condition, and are known for their ease of fabrication and formability.

ASTM A403 WP 310 Butt Weld Elbow is a pipe fitting commonly used to turn pipes in different directions at either a 45 degree or 90 degree angle. There are also different sized elbows. They are short radius elbows or long radius elbows. Grade 310 steel has a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. Due to the high melting point, 310 stainless steel butt welded pipe fittings can also work at high temperatures. The 310 material has a melting point of 1402 degrees Celsius. This allows fittings for high pressure and high temperature services such as heat exchangers and boiler components.

We sincerely look forward to providing you with the best quality and most affordable Heat-Resistant Stainless Steel Strips, 321 Stainless Steel Coils, 301 Stainless Steel Coil and bringing the best and fastest economic benefits to your business. Our company is committed to innovation, because we know that only unremitting innovation, the brand can be sustainable development. We may stick on supplying original and good quality parts even a little profit earned. In terms of business innovation, our company shapes the corporate image, implements the brand strategy, establishes the modern corporate culture, and reasonably arranges the network.

Incoloy 800H tees are widely used in chemical plants and seawater applications. We specialize in manufacturing high quality products that will pass all required certifications. Our main goal is to meet the needs and requirements of our customers in obtaining the best fittings.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

Stainless steel grade 317L is a low carbon version of grade 317 stainless steel.Our Stainless Steel 317/317L Pipe Elbow are available in several end types, like threads, bevelled ends, bended, seamless, etc. and in different diameters and thicknesses.

The molybdenum component in grade 316 pipe elbows improves corrosion resistance, pitting resistance in chloride ion solutions, and high temperature strength. This chemical additive increases corrosion resistance to pitting chlorides and increases high temperature strength. ASTM A403 WP316 180 degree elbows are recommended for post work annealing to improve corrosion resistance. Commonly found in sports equipment, youth products, and various headgear, these 316L class eccentric and concentric reducers are designed to be used with webbing or strapping.

As far as the machinability of the pipe is concerned, the same set-up and way speed can be achieved with austenitic stainless steel for an excellent surface finish. Stainless steel UNS S31603 fittings can be used in a wide variety of procedures including: stress relief valves, centrifugal pumps, pilot valves, and more. It has significant resistance to preferred corrosion, crevice corrosion and pitting corrosion. It has realistic immunity to chloride pressure corrosion cracking. It exhibits significant preferred corrosion resistance.

Stainless steel 304 elbows are made of high grade stainless steel to help withstand fluid pressures at moderate and high temperatures. We are one of the top manufacturers of ASTM A403 WP 304 Stainless Steel Long Radius Elbows, covering the standard for forged austenitic stainless steel fittings for a variety of pressure applications.