ASTM A403 WP317 pipe fittings

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800 or also referred to as UNS N08800, nickel 800 has excellent resistance properties to chemicals as well. Renowned for its high tensile strength at elevated temperatures, Alloy 800 also resists oxidation, carburization as well as other types of high-temperature corrosion.

A sanitary elbow is a kind of sanitary fitting installed between two lengths of pipe or tubing to allow a change of direction. While these corner fittings are usually a 90¡ã or 45¡ã angle, 22.5¡ã elbows are also available.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

HastelloyC-276 (Hastelloy) is a tungsten-nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be an all-around corrosion-resistant aluminum alloy. The key moisture-resistant chlorine, various air-oxidizing fluorides, isopropyl titanate solutions, hydrochloric acid and air-oxidizing salts, have good corrosion resistance in ultra-low temperature and standing temperature sulfuric acid. Therefore, in the past 30 years, it has been widely used in extremely corrosive natural environments such as chemical plants, petrochemicals, flue gas desulfurization, pulp and paper industry, and environmental protection.

Corrosion resistance

The aluminum alloy has the following characteristics: 1. It has good corrosion resistance to most corrosive substances under the two conditions of air oxidation and repair. ¢ÚIt has good resistance to pitting corrosion, void corrosion and intergranular corrosion. The higher content of Mo and Cr makes the aluminum alloy resistant to corrosion by chloride ion content, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 aluminum alloy is one of the only types of raw materials that are resistant to wet chlorine, hypochlorite and chlorine dioxide saturated solutions. Ester solution has obvious corrosion resistance. It is one of the very few raw materials that can be used as a hot sulfuric acid saturated solution.

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

Butt welded pipe fittings provide the user with a means of manipulating the piping system. For example, elbow stainless steel pipe fittings can be produced at customizable angles if the system needs to change the flow direction.

316 stainless steel pipe bend has excellent corrosion resistance in many environments. It gives good service in atmospheric conditions, resisting most environments and is often used in marine conditions, or where industrial pollution is heavy.

ASTM A234 WPB Fittings are made up of different material grades.Hot formed WPB, WPC, WPR fittings forming at above 620¡æ[1150¨H] to 980¡æ[1800¨H] no need to be heat treated which they are cooled in still air.

904L Pipe Fittings is stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. The steel is also resistant to stress corrosion cracking and crevice corrosion. Grade 904L is non-magnetic, and offers excellent formability, toughness and weldability.

ASTM A815 S32205 Fittings can efficiently be used in environments within 570 degrees F- post this temperature, these fittings will start losing their toughness. The S32750 Buttweld Fittings have some excellent mechanical properties such as high strength and resistance towards pitting and different types of corrosion. Our Super Duplex Steel S32750 reducer is also known for its strong weldability.

Stainless steel pipe fittings consist of 10% nickel and high chromium content. Manufacturers of stainless steel fittings produce these fittings with the addition of manganese, phosphorus, carbon, silicon and sulfur in addition to the two main elements.

They exhibit excellent corrosion resistance to a wide range of corrosive environments. Type 304 and 304L grades of stainless steel pipe exhibit good machinability and have excellent weld-ability characteristics with or without the addition of filler metals.This type of steel is extremely durable and is utilized in a wide range of applications and industries.

601 is widely used in Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing, exhaust system components and combustion chamber of solid waste incinerator.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These fittings don‘t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

ASTM a403 wp304 pipe bend is done to under control conditions to avoid carburization, decarburization and scaling surface. Heat treatment methods are stress relieving, hardening and annealing which strength the ductility and corrosion resistance properties.

ASTM A 403 WP 316L is very durable across acidic and chemical toxicants. The grade has a specific thermal capacity of 500 at 20/kg K. The robust A403 WP316L module has a minimum tensile strength of 485mpa with a minimum yield strength of 170mpa and can be elongated by 40% in the system.

Unlike other types of steel such as 304 and 306, the 316l stainless steel alloy can be used in a variety of applications where high corrosion resistance is required. For example, specialists in the chemical and pharmaceutical industries use it to make surgical tools and medical implants.

Alloy 600 / Inconel 600 is combination of Nickel Chromium and Iron providing a standard material for the chemical industry and the automotive engine, aero engine and airframe sectors.

Several grades are also involved like ASTM A815 UNS S31803, A815 UNS S32750 lot more. ASTM A815 WPS 32750 Elbowpipe fittings is usually design to work as in high strength, corrosion resistance to be high, perfect weldability. All these features will be available in the product manufactured by us.As earlier said that there are several types of grades,A815 UNS S32750 Duplex Tube fittings is one of them.

Stainless grade 316Ti contains a small amount of titanium. The titanium content is usually only around 0.5%. Titanium atoms stabilize the structure of 316 at temperatures in excess of 800¡ãC.

Regarding ASTM A815 WPS31803 s32750 s32760 904L S31254 254SMO 180deg ELBOW ASME B16.9, duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of roughly equal proportions of austenite (face-centered cubic lattice) and ferrite (body-centered cubic lattice) two phase composition. They are designed to provide better corrosion resistance, especially chloride stress corrosion and chloride pitting.

Steel is a metal called a base alloy. Alloys are two or more natural metal elements fused together to form a unique metal. When we talk about steel we are talking about a metal alloy which is a mixture of iron or at least one other metal. Most types of steel have several metals mixed in, although their amounts may vary.

Stainless steel 310S differs from wrought iron, which contains little or no carbon, which also has variations and combinations of production routes. Stainless Steel 310 End Cap Butt Weld Fitting is an iron and carbon alloy containing less than 2% carbon and 1% manganese and small amounts of silicon, phosphorus, sulfur and oxygen.

Inconel 718 Fitting (UNS N07718) is a chromium-nickel-molybdenum alloy considered resistant to a wide range of severe corrosive environments, crevice corrosion and pitting corrosion. Inconel 625 Fitting (UNS N06625) is an oxidation and corrosion resistant nickel alloy with excellent water corrosion resistance and high strength. Inconel 601 Fitting (UNS N06601) is a nickel-chromium alloy used for functions requiring heat and corrosion resistance.

When we call a steel tee ¡°equal tee¡±, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. When we see only one size of tee in its description, it means this tee is the equal tee. for example, 8¡å tee mean the tee main pipe and branch pipe both are 8 inches. Sometimes the equal tee also described 8¡åX8¡å which is the same meaning of 8¡å tee.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.