ASTM A403 WP347 pipe fittings

We are also a supplier and exporter of tees such as ASME A182 Duplex Steel S31803/S32205, which crosses the word with hydrogen sulfide, the leading culprit in causing sulfide corrosion cracking in sour service. We have the widest stock of Duplex ASTM A815 Fittings such as Duplex S31803 Tee, Duplex S32205 Stub End, S32205 Double End Cap, Duplex 2205 Reducer, Duplex Cross, Duplex steel S31803 elbow, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Duplex Steel UNS S31803 / S32205 Butt Welded Pipe Fittings, we make sure to provide you with a product that meets the required quality standards and has a longer service life. Our ASTM A815 Duplex Steel S31803/S32205 Elbows limit localized corrosion types and are essential for applications requiring a compact yet flexible seal.

As a butt weld fitting, it works with lap flanges. The use of stainless steel short pipe ends and lap flanges can effectively reduce pipeline maintenance costs. In stainless steel piping systems or advanced systems, we can choose low-grade lap flanges with stainless steel short pipe ends as an alternative to flanged connections instead of butt-welded flanges, effectively reducing manufacturing costs.

We insist on trying our fittings during processing to make sure it’s the ideal variety. Incoloy WNR 1.4876 Equal Diameter Tee Fittings are known for their robust construction, perfect finish, dimensional accuracy, elegant design, high reliability, perfect insulation and more. It is also known for its low maintenance, high durability, perfect design, easy operation, finish, simple installation, durability, perfect size, etc. To stay top-notch, it’s synthetic under the guidance of corporate experts. The pipe fittings we provide are widely demanded in enterprises because of their advanced and first-class construction and inflexible construction.

A reduction in carbon content in any austenitic stainless steel alloy has proven to be detrimental to fittings. To solve this problem, manufacturers add some nitrogen to the alloy of UNS S31603 316L stainless steel fittings, making it mechanically similar to stainless steel alloy 316.

The main characteristics of stainless steel 316/316L pipe fittings, SS 316/316L flanges are high oxidation resistance, better corrosion resistance than type 304 stainless steel, excellent pitting resistance Chemicals are very resistant.

One of the greatest benefits of Inconel 600 fittings is their ability to maintain their performance even at high temperatures. It has a minimum yield strength of 310 MPa and a minimum tensile strength of 655 MPa. It has an elongation of 40%, which is pretty good. Inconel 600 material has a melting point of 1413 degrees Celsius, which makes it ideal for high temperature applications and has a long service life. It can be easily bent and welded, and the size can be customized according to specific requirements.

Titanium is a dimorphic element with a hexagonal form that slowly converts into a body-centered cube at an elevated temperature of 880 ?C.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

HASTELLOY X pipe bend is a wrought nickel base alloy with excellent high temperature strength and oxidation resistance. All of the product forms are excellent in terms of forming and welding.

Monel K500 alloy has the same corrosion resistance as Monel 400 alloy.

Stainless steel 316 butt weld joints are made of chrome-nickel-molybdenum alloy austenitic stainless steel. The material has good corrosion resistance, similar strength to 304 grade steel, and good hardness.

Hastelloy C-22 (UNS N06022) pipe bends and fittings in stock, allowing for a quick turnaround. Hastelloy C-22 has excellent resistance to aggressive oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.

we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

ASTM A403 WP316 fittings are available in different sizes and shapes in pressure ratings 3000#, 6000# and 9000#. Stub end fittings are often used to close one end of a pipe.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Duplex Stub End Fittings¡ªDuplex steel stub ends are installed in pairs and mate with two lap flanges. The surface of the alloy stub end has a voice pattern serrated gasket surface to prevent leakage at the joint. Use stub ends to open up parts of the circuit for cleaning, inspection, or quick replacement, etc., without the need for re-soldering.

Nickel 800H reducing butt welded pipe fittings are also used in heat exchangers, dampers, pressure vessels, etc. Our Alloy 800HT Elbow Butt Weld Fittings can also be used in industrial furnaces and heat treating equipment.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

Duplex steel butt welded pipe fittings are a stainless steel alloy with a dual microstructure, which is the reason for their exceptional mechanical strength and excellent corrosion resistance. Fittings manufactured to ASTM A815 specifications are manufactured with seamless construction or welding. While A815 S31803 is a specification that allows for different forging or forming operations; it also covers these fittings, for example duplex steel fittings can be produced by manufacturers using a combination of two or more processes.

Duplex fittings have medium performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304. What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance in a wide range of marine and chemical environments and has freedom from chloride induced stress-corrosion cracking.

A standard AMS 5666 or UNS N06625 variant of Inconel 625 may contain 58% nickel, 22% chromium, and 3.5% niobium.

We can manufacture and supply high quality carbon steel pipe elbows with bending radius ranging from R=3D-10D and bending angle from 10 degrees to 180 degrees. In addition, we can also manufacture carbon steel elbows according to the customized requirements of our esteemed customers. All our carbon steel fittings and flanges are supplied with relevant raw material and finished product test certificates. Carbon steel pipe elbows with bend radii of 3D, 5D and 7D are most commonly used in various industries. Our main elbow products include – high quality carbon steel long radius pigging elbows, seamless long radius pigging elbows and welded long radius pigging elbows.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

Grade 316 pipe bend also has given excellent service in potable water. Pitting and crevice corrosion may occur in waters with higher chloride content, and 2000 ppm is accepted as the upper limit. The higher molybdenum content of 316 make it significantly more corrosion resistant than grade 304.