ASTM A403 WP348 pipe fittings reducers

We manufacture Alloy 825 tubing for use in pollution control tools, oil piping and gas equipment. In addition, they are used in the power generation, petrochemical and pharmaceutical industries.

2205 has proven to be an excellent alternative to austenitic stainless steels in marine environments. It exhibits good heat resistance up to 300 degrees Celsius. It can be easily soldered by most standard methods, the only mandatory requirement is the use of filler metal. Due to its high strength, workability is low.

Stainless steel pipe fittings are widely used in manufacturing for their durability and cost-effectiveness. It has many advantages over traditional pipe fittings that make it more popular than any other. The cost-effectiveness of alloy products has greatly facilitated their widespread use. In addition to this, it also helps with the maintenance of the plumbing system.

High levels of chloride prevent corrosion and can operate at temperatures up to 300 degrees Celsius. Duplex stainless steels have better ductility at low temperatures compared to ferritic grades.

This alloy provides improved resistance in highly corrosive environments with sulfur-containing media and chlorides. Stainless steel UNS S31700 pipe elbows are non-magnetic in the annealed condition. It can be easily welded and machined. Stainless steel 317 / 317L forged fittings can be hardened by cold work.

Inconel 625 elbow has also found its way into the aircraft industry, particularly for exhaust equipment, fuel lines, heat exchanger casings, and rocket components.

Inconel 601 (UNS N06601 ) nickel-based alloy density: 8.42 g/cm3 (grams/cubic centimeter).

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

429 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates. The material grade can be SS 429, Type 429, WNR 1.4001, UNS S42900, AISI 429, Grade 429

These Stainless Steel 304/ 304L Fittings/Fittings feature exceptional quality finishing and pressure for long life, high pressure and zero defects. We manufacture stainless steel 304/ 304L pipe fittings for end users such as marine engineering, chemical processing, hydrocarbon processing, heat exchangers, valves and pumps. And ship worldwide.

ASTM A403 WP317 Pipe Fittings?could be a altered adaptation of?Stainless Steel 317L Pipe Fittings.

Pure titanium is almost 99.2% pure and is a lustrous metal with low density and high corrosion resistance.

Incoloy 825 fittings are known for their resistance to chloride stress-related corrosion cracking and pitting. We are a leading manufacturer and supplier of ASTM B366 Alloy 825 Elbow. The addition of titanium to the alloy is what stabilizes the alloy 825 tee against sensitization in the as-welded state. Thus, making these fittings resistant to intergranular attack even in temperature ranges that would normally make unstable conventional-use stainless steel grades sensitive.

SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties.ASTM A403 WP304 Fittings covers the standard for created austenitic stainless steel fittings for pressure piping applications.

The alloy is used in many fields, especially marine and chemical processing.

Nuclear systems also generally involve high temperatures beyond 650¡ãC, in which the strength of Inconel 625 elbow can withstand.

The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

Monel 400 is resistant to both steam and seawater as well as highly caustic solutions such as sulfuric, hydrochloric, and hydrofluoric acids when they are deaerated.

Alloy 20 is also known as UNS N08020 which is a stainless steel grade containing high alloy with excellent resistance to stress corrosion and sulfuric acid. This alloy grade contains various elements like copper, nickel; chromium and molybdenum that together help in offering crevice corrosion, resistance to corrosion and pitting.

Super Duplex 2507 (F53 / 1.4410 / UNS S32750) has excellent corrosion resistance to a variety of media, and has excellent resistance to pitting and crevice corrosion in seawater and other chloride-containing environments, with a critical pitting temperature exceeding 50¡ãC.

This combination makes the material resistant to corrosion and high temperatures up to 889 degrees Celsius. 304 stainless steel butt weld fittings meet standard ASTM A403 and are available in outside diameters from ?” to 48″. For seamless fittings, diameters range from ? to 10 inches.

We are manufacturing buttweld seamless and welded Stainless steel 304/ 304L fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends in accordance with ANSI/ASME and DIN standards.

Hastelloy C-276 alloy excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, and hot contaminated media (organic and inorganic).

Type 316 steel is an austenitic chromium-nickel stainless steel that contains between two and 3% molybdenum.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Incoloy 800H is a high carbon grade of these 800 alloys. These alloys exhibit excellent resistance to post-weld carburization and graining. They remain ductile for extended periods of time at temperatures below 700 degrees Celsius.

Our WNR 1.4462 Duplex Steel S31803 Pipe Fittings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

Stainless steel grade 446 pipe fittings is most commonly used, it also contains molybdenum, and little contains nickel alloy. This steel is suitable to use in elevated temperature and comes with slightly low carbon contents. Furthermore, the presence of titanium metal makes it stabilize the structure of stainless steel against the chromium carbide precipitation.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.