ASTM A403 WPNIC10 pipe fittings elbows

All of the common methods of welding can be used to weld Hastelloy C-276 alloy, although the oxyacetylene process is not recommended. Special precautions should be taken to avoid excessive heat input.

Valued for its high strength and corrosion-resistant properties, Monel 400 is available from Continental Steel in multiple forms for use in a variety of end uses.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

More than a hundred years of development have allowed nickel alloys to have a wide range of applications and strengths, and have produced many forms. We offer Inconel, Monel and Incolloy alloys for everyday use and high stress industrial, energy or chemical environments.

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.

Carbon steel pipes are a popular choice for a variety of applications. Ventilation and steam ducts, municipal ducts and sewage ducts are usually made of carbon steel. It helps if you consider additional properties that may be required in chemicals or temperature. The above details can help you determine which steel is right for you.

They exhibit excellent corrosion resistance to a wide range of corrosive environments. Type 304 and 304L grades of stainless steel pipe exhibit good machinability and have excellent weld-ability characteristics with or without the addition of filler metals.This type of steel is extremely durable and is utilized in a wide range of applications and industries.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

Grade 316 pipe bend is readily workable, by the standard methods of sheet metal working, with the exception that it cannot be oxygen cut. Plasma cutting is normal. The deep drawing capability of grade 316 is outstanding, because of its high austenite stability.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel pipe fittings resist corrosion from aggressive chemicals, corrosive fluids, oils and gases, and withstand pressure and high temperatures in plumbing applications and food and dairy processing. Threaded fittings have threads on both ends of the connection. The female thread is on the inside of the fitting.

316 Stainless Steel Pipe Fitting is widely used in the connection of pipe fittings. Our company has been manufacturing and supplying stainlesss steel elbow for years of experience. With the advantages of huge stock ability, we could provide you the quick delivery. Besides, with a strict quality control system, we could guarantee the quality.

AL-6XNalloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

In addition to heat resistance, Hastelloy Buttweld Fittings have high resistance to corrosion, pressure and oxidation. Hastelloy pipe fittings also have excellent mechanical properties and are often used in the chemical and aerospace industries.

Since the Stainless steel 90 degree elbow is sold as per pipe fitting it is important to know the pipe schedule this helps in matching the ID of the fitting to that of the pipe. 150# stainless steel socket weld fittings are available in both seamless and welded conditions.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Titanium resides in group 4 (IVB) of the periodic table, which means it is in the middle.

Monel K500 pipe bend and elbow are resistant to a sour-gas environment

While there are slight variances to different hot pipe bending methods, nearly all are a form of induction bending.

In industry, pipes are used for transportation. Fluids, liquids, gases, and other products are often transported by pipelines in industry. Industrial pipes are extremely prone to dust, debris and damage, so to protect the pipe and its ends, pipe caps are widely used. We provide 1-4 to 4 chinese ss304 ss316 2205 stainless steel pipe fitting cap.

Stainless steel 304 pipe fittings contain both chromium 18% – 20% and nickel 8% – 10.5%. It is an austenitic stainless steel and is less electrically and thermally conductive than carbon steel. It is a component that helps in change the direction of the flow such as tees and pipe bends.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

UNS N10665 or W.Nr. 2.4617, Hastelloy B2 (also known as “Alloy B2”), is a solid solution reinforced Ni Mori with low additions of carbon, silicon and iron. It can be used to reduce chemical environment and chemical processing industry. However, Hastelloy B2 should not be used in temperatures from 1000¡ãF to 1600¡ãF and should not be used in oxidizing media.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

The accumulation of copper to the grade 904L alloys makes it resistant to corrosion, especially phosphoric, acidic, and sulphuric acid.It Is A Kind Of Corrosion And Heat Resistant Steel.

Hastelloy C276 is one of the few grades resistant to wet chloride gas and chlorine dioxide.

An ASTM A403 WP304 Fittings is a type of austenitic grade fitting. SS Pipe Fittings can either be seamless or ERW.

Stainless Steel A403 WPS31254 contains higher chromium and low carbon content.Size : ?¡±NB to 48¡åNB in Sch 10s, 40s, 80s, 160s, XXS.