ASTM A815 S32550 pipe fittings

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

The resistance of the Monel 2.4360 eccentric/concentric reducer to salt solutions and its excellent resistance to stress-related corrosion cracking make the Monel 2.4360 eccentric/concentric reducer ideal for surviving in most freshwater bodies.

Stainless steel 304 fittings are one such type of pipe, offering high tensile strength, corrosion resistance and a flawless finish. Excellent corrosion resistance and reduced carbon content along with high strength make DIN 1.4301 AISI 304 long radius elbows suitable for applications requiring welding. It is a versatile alloy used in strongly corrosive electrical enclosures.

Hastelloy C-276 is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe, tubing, pipe fittings, flanges, fittings.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Stainless steel reducer fittings are similar to couplings, but they can be detached and attached to the pipe and then screwed back to connect them. 316 stainless steel pipe fittings are used in the water pipeline, natural gas, manufacturing and nuclear power plant industries.

This series clamp tee sanitary fitting is made of stainless steel 4 and clamps to tubing on all three ends. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.

An elbow is a flexible component that allows changing directions in a piping system. Elbow is divided into two groups of long radius and short radius, which can be changed by 45 degrees, 90 degrees and 180 degrees. Elbows can be classified based on distance, which changes in direction from the centerline to the opposite face of the component. Also called center distance. Opposite the center for long radius elbows is the 1.1/2 X nominal pipe size, while for short radius elbows it is the same as the nominal pipe size.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

They come in different sizes and types; for example, the SS 304 45 degree elbow is used to change the direction of the pipe by a 45 degree angle. Likewise, the UNS S30400 90-degree elbow changes the direction of the pipe by a 90-degree angle. According to customers’ requirements, we can provide exclusive elbows to meet their needs.

Hastelloy C-276 alloy excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, and hot contaminated media (organic and inorganic).

Type 304 is the most popular stainless steel and is a natural choice for its corrosion resistance. It resists rusting in many different environments, but is primarily attacked by chlorides.

Therefore, stainless steel elbows are widely used in high temperature applications. A403 WP316 elbows are widely used to change the direction of pipes and are available in different diameters, shapes and sizes. A403 WP304 elbows can be easily welded, but the material may face localized corrosion due to the risk of intergranular corrosion.

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

we are traders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The process to produce cast stainless steel pipe fittings is investment casting in lost wax method. In stainless steel investment casting, a specific and general wax pattern of the preferred pipe fitting is produced and mounted onto a wax tree. The wax tree is interchangeably plunged into a ceramic substance and topped with a stucco material. After this, it is left to dry out, and the process is repeated until a thick shell is achieved.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

It has high creep-rupture strength. The following datasheet gives an overview of Incoloy 800HT.

The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction covered by the latest revision of Specification A960/A960M. Fittings differing from these standards may be furnished in accordance with Supplementary Requirement S58 of Specification A960/A960M.

The Stainless Steel 304 Pipe Fittings are also strong. They have 205MPa minimum yield strength and 515MPa minimum tensile strength.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A403 WP317L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Chemical and product analysis should be performed and should meet the required chemical composition of carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum and titanium.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The mixture of austenitic chromium-nickel-iron with a small amount of molybdenum makes Alloy 20 known as a “superalloy,” which provides resistance to acid attack under a variety of conditions. We are a manufacturer of ANSI B16.9 Alloy UNS N08020 Equal Tee with good machinability.

CS ASTM A420 WPL3 Pipe Fittings are combines Good ductility, High strength, Tensile strength, Yield strength, Fatigue resistance, Toughness, Wear resistance and Outstanding corrosion resistance qualities.