ASTM A815 Super Duplex Steel UNS S32750 Buttweld Fitting Tee

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

2507 has high resistance to stress corrosion cracking (especially chloride stress corrosion cracking), high energy absorption, high strength, and erosion. Essentially, and the Duplex alloys are a compromise.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Austenitic has a low strength and a low resistance to stress corrosion cracking, while ferritic also has a low strength, poor weldability and poor low temperature toughness. Producing a chemical composition that combines austenitic and ferritic results in a metal that has a higher strength, good weldability, good toughness and resistance to stress corrosion cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A182 F51 flanges refer to pipe flanges made from the forged duplex stainless steel grade UNS S31803 for use in pressure systems.

The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion.

We are manufacturers of ASTM A182 Duplex UNS S32750 / S32760 Flanges show enhanced pitting corrosion resistance in saline environments, brackish waters, bleaching operations, and selected food processing applications.

The advantage of the dual-phase structure is that it combines the advantages of ferritic alloys (resistance to stress corrosion cracking and high strength) with the advantages of austenitic alloys (ease of manufacture and corrosion resistance).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.50

Stainless Steel Duplex SAF 2205 Hex Bolts are used in machinery and construction and can be used with nuts or threaded holes. Since they can be tightened with a wrench, fully threaded hex bolts are specially designed to work more efficiently. Additionally, 2205 hex bolts are stronger than standard stainless steel, meaning they can be used for jobs that require high workloads and good corrosion resistance.

The combination of chromium, molybdenum and nitrogen give Duplex 2205 flanges good protection from chloride pitting and crevice corrosion, which makes them useful for marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications.

This type of steel is excellently resistant to shearing as a result of stress corrosion, high thermal conductivity and a low thermal expansion coefficient.

Duplex steel UNS S32205 fasteners are used in the pulp and paper industry such as digesters, bleach plants and stock handling systems. Also known as WNR 1.4462 fasteners, they are developed and designed in our infrastructure to international quality standards to the highest quality standards.

The flange a182 f53 can also differ in the face type as flat face, raised face and ring type joint flanges.

Duplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels.

Duplex 2205 bolts (EN 1.4462) are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels. It helps users to avoid stress corrosion cracking that is typically seen with 316 and 317. Duplex 2205 bolts combine the qualities of stress corrosion cracking resistance and high strength derived from being a ferritic alloy along with its austenitic fabrication capabilities.

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A240 Type 2507 Super Duplex Plates must comply with ASTM A240. It is a specification of chrome and chrome-nickel stainless steel plate. Super Duplex 2507 plates are used in general applications and containers.

ASTM A182 F53 flanges refer to flanges made from super duplex stainless steel 2507 (UNS S32750) by a hot forging process.

Our duplex steel UNS S31803 fasteners are available in different grades such as industrial washers, industrial screws, stainless steel washers, stainless steel screws and more.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Gaskets are SCC resistant which is prominent in many applications such as hot water tanks, brewing tanks, desalination plants and processing plants. Therefore, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers exhibit the properties of ferritic and austenitic alloys.

Due to the alloy’s strong resistance to chemical compositions including acids, bases and neutral solutions, duplex steel uns s31803 nuts would be an ideal addition to these industries.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

This increase in alloyants is what gives the super duplex stainless steels greater corrosion resistance properties.

Super Duplex Steel have the benefit as it counterpart ¨C it has lower alloying costs when compared with austenitic grades and ferritic.

Our Duplex Steel S31803 bar is an industrially processed nitrogen-modified steel that addresses common corrosion problems encountered with 300 series stainless steels.

Duplex 2205 stainless steel round bars (ASTM A276/ ASTM A479) exhibit good heat resistance up to 300¡ã. SS Rod can be easily welded by most standard methods, the only mandatory requirement is the use of filler metal. Due to its high strength, machinability is low.

Duplex stainless steel, alloy 2205 was designed as comprising 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen. Alloy 2205 combines the desirable aspect of properties of both austenitic and ferritic grades.

A ferrous metal is one that contains iron. Therefore, stainless steels are ferrous metals as their main constituent is iron, even in the very highly alloyed grades, such as super duplex stainless steels, or super austenitic stainless steels.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

UNS S32750 or DIN W.Nr. 1.4410, Duplex 2507 is a super duplex stainless steel conutaining 25% chromium, 4% molybdenum and 7% nickel, designed for demanding applications requiring exceptional strength and corrosion resistance, such as chemical Process, petrochemical and seawater equipmenut.

The duplex stainless steel grade alloy UNS S32750 Washer is a thin plate, which is typically produced in a disk -shaped, although sometimes square shaped with a hole i.e. sometimes present in the middle.