ASTM A815 WP429 pipe fittings elbows

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

ASTM A860 WPHY 46 are Wrought High Yield fittings and are generally used at High-pressure requirements. A860 refers to the high strength of the fittings. ASTM A860 WPHY 46 Pipe Fittings are known for high tensile strength and corrosion resistance. Available in numerous specifications, these ASTM A860 Fittings are manufactured with high-grade steel & tested by a quality expertise team.

ASME B16.11 A403 Gr WP316L Threaded Fittings for Textiles, Pharmaceuticals, Condensers, Tanks and Evaporators. In addition to applications such as pressure vessels, industrial boilers, furnace components, threaded fasteners, and more, industrial manufacturers use these stainless steel 316L covers.

The alloys used to make these 304 stainless steel socket weld fittings are the most adaptable and widely used. UNS S30400 Short Radius Elbows can be used for high temperatures up to 889 degrees Celsius.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

However, titanium can lose its strength at temperatures greater than 430?C because it is not as hard as high grades of steel.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

In oxidizing conditions, INCONEL 600 has better corrosion resistance than Alloy 200 and Alloy 201.

In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Grade 316 pipe bend is relatively easy to machine, although more difficult than carbon steel. More power is required to machine grade 316. Cutting speed should be lower, the feed higher, tooling and equipment heavier.

As an important category of pipe fittings, pipe caps are in great demand. If a solvent welded cap is used as a future connection point, you must leave a few inches of tubing in front of the cap; when the cap is cut off for future connections, you must leave enough tubing to allow the new fitting to be glued to it. We offer 1-4 inch bw ss pipe fittings 304L cap.

SD reducers are designed for featuring resistance to pitting, corrosion fatigue, erosion-corrosion, SCC, crevice corrosion and also high strength and good welding ability. SD cross combines ductility, high mechanical strength and corrosion resistance at ranges of the atmosphere.

A tee of 304 pipe fittings is the most common pipe fitting. It is available with all female thread sockets, all solvent weld sockets, or with opposed solvent weld sockets and a side outlet with female threads. When the size of the branch is same as header pipes, equal tee is used and when the branch size is less than that of header size, reduced tee will be used.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY? alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

316L is the superior choice for high corrosion and high temperature applications. Since 316L contains less carbon than 316, it has better intergranular corrosion resistance, meaning its welds won¡¯t decay, unlike with 316 stainless steel.

Other available materials include silicone, rubber compounds, galvanized steel, and nylon. These sanitary fittings are primarily used to connect hoses to valves, water pumps, and deck drains.

While 300 series stainless steels are very popular, they are not universally suitable for all process piping applications. For example, even though they are corrosion resistant, 300 series formulations do not perform well in the presence of chlorides. In these cases, steels with much higher alloy contents such as molybdenum, chromium and nickel are preferred.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Among the various grades of stainless steel, one grade is austenitic steel containing columbium. Fittings made from it are called stainless steel 347 fittings. They are widely used at high temperatures and have amazing forming and welding quality. The addition of columbium to stainless steel 347 weld fittings provides resistance to intergranular corrosion. It also shows improved corrosion resistance in strongly oxidizing environments. They are widely used to install, connect and configure other products.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

Incoloy 800 is an alloy whose primary constitution is made up of nickel, iron, and chromium. This particular alloy, unlike the former, has less than 50% nickel content in its chemical composition. Aside from their chemical makeup, the other points of distinction for both the alloys are their use in a specific set of applications or industries.

Super duplex UNS S32750 Buttweld Fittings has a low carbon content which lowers the risk of carbide precipitation in the grain boundaries during the heat treatment. They are highly resistant to crevice corrosion due to high chromium and molybdenum content of UNS S32750 Super Duplex Pipe Fittings makes it extremely resistant to uniform corrosion by organic acids such as formic and acetic acid.