ASTM A815 WPS31803 SCH40S 45 degree LR Elbows

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Duplex is a metal that is made of a two-phase microstructure consisting of austenitic stainless steel and ferritic structures.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

UNS S32205 Hex Bolts (also known as S31803) are made of high grade duplex 2205 stainless steel. Because this material is composed of at least 22% chromium, 6% nickel, and 3% molybdenum, it can withstand some of the harsh environmental conditions that other metals cannot, such as corrosion, cracking, erosion, pitting, and more. Stainless Duplex 2205 Hex Bolts also provide twice the mechanical strength compared to standard stainless steel.

The duplex microstructure gives this grade high strength UNS S32750 a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300¡ãC.

Duplex 1.4462 round bars also have low thermal expansion and high thermal conductivity as well as high corrosion and erosion fatigue properties compared to austenite. The corrosion resistance of duplex 2205 is almost twice that of other austenitic stainless steels.

All Duplex 2205 Seamless Pipe produced according to the ASTM A789 must be furnished in a heat treated condition.

The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.

2507 has Combination of properties given by austenitic and ferritic structure, and Good weldability and workability.

Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Material: Duplex Steel ASTM A789 S31803,S32205,S32750, S32760
ASTM A790 S31803,S32205,S32750, S32760

Duplex 2507 has high resistance to chloride stress corrosion cracking, high Strength, and superior resistance to chloride pitting and crevice corrosion.

Duplex Stainless Steel offers excellent resistance to corrosion along with very high mechanical strength, which allows for lighter fabrication and greater design flexibility. With this high corrosion resistance, Duplex Stainless Steel provides more uptime than Carbon Steel or conventional Stainless Steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The combination of high strength, corrosion resistance and moderate weldability has many benefits but also bring disadvantages and limitations. High strength is a disadvantage when forming and machining. The higher strength also means that the metal is less ductile than austenitic grades. This means that these steels are not good when the goods being produce require any degree of complex forming. It is also worth bering in mind that evemn if the item can be formed in duplex steel greater forces are required. The metallurgy of duplex stainless steels is much more complex than for austenitic or ferritic steels whith the result that they are more complex and therefore expensive to produce. Howver the lower quantity of nickel in them as compared to austenitic grades does help to keep the cost down and reduce price volatility.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade.

Compared with austenitic stainless steel, F51 duplex stainless steel has twice the compressive strength, and compared with 316L and 317L, the designer can reduce its weight.

Duplex steels have higher toughness and better weldability. This is how alloy steel is used for industrially available pressure vessels.

Since the material is also resistant to acids and chlorine compounds, it could see its application in marine environments, especially in saltwater containing chlorine compounds. The ferritic portion of the duplex structure of Super Duplex 2507 round bar alloy makes it resistant to stress corrosion cracking in warm chloride-containing environments.

There are SA 182 F53 S32750 Blind Flanges, socket weld flanges and weld neck flanges in this range of material. The different flanges are used in different applications set ups.

Duplex alloys have some of the ferritic stress corrosion cracking resistance of common austenitic stainless alloys and many of the superior formability properties that are more cost effective than high nickel alloys.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super Duplex 2507 has more than twice the strength of conventional austenitic stainless steels in the annealed condition.

Type: Seamless, Welded

WT: SCH5-SCH80S

The 2205 Duplex Stainless Pipe produced in accordance to ASTM A790 specification could be constructed by either a seamless construction or an automatic welding process.

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

Some steels also contain Mo, Cu, Nb, Ti, N and other alloy elements. Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Technically, the microstructure of a duplex 2205 tube is approximately 50% ferrite and 50% austenite. As a result, the properties inherited from both categories make this nitrogen-enhanced duplex 2205 seamless pipe ideal for use in industries such as food processing, oilfield piping and heat exchangers, and flue gas desulfurization.

Duplex 2205 stainless steel plate has excellent corrosion resistance, much higher than grade 316. It can withstand localized corrosion types such as intergranular, pitting and crevice.

ASTM A182 Super Duplex F55 Hex Bolts is used for Pumps, valves, chokes, Connectors, Pipework/flanges, Oil & Gas components, Manifolds, etc. The resulting savings in weight of ASME SA 182 Super Duplex S32760 Hex Bolts can dramatically reduce the overall cost of fabrication. Anneal Heat this ASME SA479 Super Duplex S32760 Hex Bolts to 1025 Degree C ¨C 1120 Degree C ensuring sufficient time is allowed for the centre to achieve furnace temperature and hold for a time commensurate with the ruling section, followed by water quenching.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

2507 is also used in Flue Gas Scrubbing Equipment, Pulp and Paper Mill Equipment, Offshore Oil production/technology and Oil and gas industry equipment.

2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.

At this temperature, duplex steel flanges over 300 degrees Celsius are still protected from embrittlement due to corrosion. Duct capability is also excellent at low temperatures. Fabrication is done only with tools assigned to stainless steel materials. Must be properly cleaned before use. This is done to protect the stainless steel from cross-contamination of the corroding metal.