ASTM A815 WPS31803 WPS32205 WPS32750 Fittings Elbows

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Chrome moly alloy flanges connect pipes, valves, pumps and other equipment, forming a piping system.

The Chromium content in the alloy aids in improving its anti-oxidization and anti-corrosion properties. This steel is usually supplied by the alloy steel flanges manufacturers in India in an annealed or normalized and tempered condition.

Grade B7 is a heat-treated chromium-molybdenum alloy steel with minimum tensile requirement of 100 ksi, yield of 75 ksi and maximum hardness of 35 HRC.

The carbon form can be iron carbide or Alloy Steel F9 Weld Neck Flanges can be carbide of an alloying component, for example, titanium. The A182 F9 Steel Slip On Flanges are good for use with seamless pipes because the flanges allow for the pipes to slip onto them for precise location for the connection.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

While each variation of Inconel has unique traits that make it effective in different circumstances, the majority of the alloys are used frequently in the chemical industry.Its welding characteristics,
especially its resistance to postweld cracking, are
outstanding

ASTM A182 Gr F9 flanges are typically designed for applications with high temperature requirements. Alloys used to produce flanges according to this specification include wrought or rolled alloys and several stainless steel grades.

These pipes are highly resistant to high temperature and corrosive environments. The absolute roughness of astm a335 gr P9 seamless pipe is small, so the size is very accurate.

Alloy steel pipe has a hollow section and is widely used as a pipeline for transporting fluids, such as oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, alloy steel pipe is lighter in weight with the same bending and torsional strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Astm a182 f12 product has good yield strength and tensile strength. In addition, it has high hardness and 20% elongation.

We can supply chrome molybdenum alloy flanges sorted by alloy grade, size and pressure.

ASTM A182 is the Standard Specification for Forged or Rolled Alloy Steel Pipe ASTM A182 F11 Flanges, Forged Fittings, and Valves and Parts. These alloy steel A182 grade F11 WNRF flanges are designed for high temperature applications.

INCONEL? alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423¡ã to 1300¡ãF. Inconel alloys are resistant to oxidation and have the ability to maintain its structural integrity in high temperature atmospheres.

The heat treatment could be heat treated according to any of the WPHY 52 specification by either tempering, normalizing, quenching or stress relieving.A860 refers to the high quality of the fittings.

Grade B7 is a heat treated chromium molybdenum low alloy steel with a minimum tensile strength requirement of 125 ksi (860 Mpa), a yield strength of 105 ksi (720 Mpa) and a maximum hardness of 35HRC. Boltport produces B7 headed and headless bolts from alloy steel AISI 4140 bar stock or forgings. A193 Grade B7 is the most commonly used bolting size, plus A194 Grade 2H nuts are used for bolting carbon steel pipe. A193 B7 bolts are available in metric sizes from M6 to M180 and imperial sizes from 1/4 to 7 inches in diameter.

ASTM A335 alloy is the steel pipe defined according to the production bill of materials (or material). As the name implies, the alloy pipe and the seamless steel pipe are defined according to the production process (seamless seamless). The difference between the seamless pipe is the welded pipe, including the straight seam welded pipe and the seamless steel pipe. Spiral tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Chromium-molybdenum alloy steel has strong crack resistance under high temperature and high pressure. Chromium molybdenum is also resistant to hydrogen attack and hot sulfide corrosion cracking.

Alloy Steel Flange Material can differ according to its chemical composition. Low Alloy Steel Flanges are widely used for automotive and aerospace bodies, offshore and onshore structural engineering plates and railway lines.

A335 pipe is highly resistant to rupture at high temperature and pressure. Chromium molybdenum tubes with resistance to hydrogen cracking and sulfide stress corrosion cracking are superior to carbon tubes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

A182 Gr F1 threaded flange is widely requested, also known as threaded flange, it has a thread in the flange hole, it is installed on the pipe, it matches the external thread on the pipe.

ASTM A333 is a standard specification for seamless and welded carbon and alloy steel pipes for low temperature service or other applications requiring notch toughness. This standard covers several grades of ferritic steels: Grade, Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10 and Grade 11. Metals-Piping offers welding processes by seamless or no filler metal added in the welding operation, but Grade 4 shall be manufactured by seamless processes only. Pipes should be free of welding repairs, either by radiographic or ultrasonic testing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P146

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Chromium increases the tensile, yield and hardness of steel at room temperature. This is why ASTM A335 chrome-molybdenum alloy seamless steel pipes are mainly used in power plants, refineries, chemical plants and oilfield platforms where fluids and gases are transported under extremely high temperatures and pressures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P97

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel flanges, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

ASME SA 335 P91 alloy steel pipe also has some excellent properties such as strong construction, precise dimensions, corrosion resistance and more. Our line of ASTM A335 P91 Alloy Steel Pipe is perfectly engineered in tubular form and in a variety of sizes.

Regardless of its cost-effective solution, F11-grade rebar is a way to meet the corrosion resistance and mechanical performance requirements set by various industries.

Grade 1 alloy steel plate has very high corrosion resistance, but it is increasingly expensive. Our alloy steel products are known worldwide for their reliability and quality.

It helps improve fatigue resistance. Many industries, including paper and pulp, chemical reprocessing, water pipelines, nuclear power plants, heat exchangers and others, use ASME sa182 f12 projects in a variety of applications. Our Premium Alloy Steel F12 Flanges are corrosion free, edge perfect, efficient, lightweight, frictionless work, easy to install, highly conductive and of great quality.

Monel 400? can be used in temperatures up to 1000 oF. Monel K-500 is basically a better version of 400 and has higher strength and hardness.