ASTM ASME SB 160 Alloy 200 steel round bar sizes UNS N02200 Nickel alloy bar

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 718 round bar is a rain-resistant nickel-chromium alloy that contains large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium.

2.4375 Monel K500 round bar is non-magnetic, as an alloy, Monel K500 ASTM B865 hexagonal bar exhibits excellent mechanical properties over a temperature range from sub-zero settings to 480C. Monel ASTM B865 hollow bars require annealing when welded, and weldments should be stress relieved to the alloy prior to aging.

Alloy 718 is a nickel-chromium alloy that is easy to manufacture and has excellent welding characteristics, especially where resistance to post-weld cracking is required.

Inconel 625 bar is a heat resistant nickel based superalloy. The high strength of these bars makes them a difficult prospect for machines. Bars of this grade have a machinability rating of 17% and a hardness of 29 HRC.

Unlike austenitic stainless steels, Inconel 625 round bars offer the advantage that they are less susceptible to chloride-induced stress-related corrosion cracking.

Hastelloy C22 bar contains a high amount of nickel-molybdenum-chromium superalloy as well as tungsten and is designed to provide excellent corrosion resistance in a wide range of harsh environments. It is very resistant to corrosion in immersion environments and is used for chemical applications in the as-welded state.

Hastelloy UNS N10276 cold drawn bar has excellent resistance in a variety of chemical process environments. For example, Hastelloy C276 UNS N10276 square bar is resistant to corrosion in a variety of media, including strong oxidants (such as ferric chloride and cupric chloride), hot fouling media (may be organic or inorganic), chlorine, acetic anhydride , formic acid and acetic acid, as well as good tolerance to seawater and saline solutions.

The Inconel 600 Round Bar exhibit superior strength and excellent corrosion resistance properties.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

Alloy C276 bar can be used for welding in most chemical process environments. Alloy C276 rods can be successfully fabricated in a number of ways. Inconel C276 round bars also have exceptional corrosion resistance and ability to withstand extreme temperatures. These Inconel C276 rods are available in a variety of sizes to meet customer application requirements.

Inconel 601 is an alloy composed of nickel and chromium.

It also resists pitting and crevice corrosion well in fresh seawater at temperatures up to 50¡ãC (122¡ãF).

Cupronickel is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware. It is sometimes used for the propellers, propeller shafts, and hulls of high-quality boats.

Alloy 625 is especially useful where oxidation resistance and pitting avoidance are required. In the annealed condition, this Inconel is fully austenitic and suitable for machining. Due to its high alloy content, it provides excellent corrosion resistance in a variety of severely corrosive environments. With a nickel content of nearly 60%, it is virtually immune to stress corrosion cracking.

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

The high performance alloy Inconel 718 round bar inherently derives many good properties from nickel. Inconel 718 bar falls within the scope of the ASTM B637 specification, which in turn covers nickel-based hot-worked and cold-worked precipitation hardening alloys.

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

70/30 Copper Nickel round bar has a pressure class of 200 or standard.

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

Inconel 625 round bar has the best acid and alkali corrosion resistance. Inconel 625 Hex Bar has the best corrosion resistance to sulfuric and phosphoric acid. Inconel 625 threaded bar can be annealed in the temperature range between -320¡ãF and 842¡ãF.

The alloy 601 also has good resistance to aqueous corrosion.

The alloy 601 also has good resistance to aqueous corrosion.

The ASTM B166 specification is the standard for Alloy 718 ASTM B166 hot rolled bar.

Incoloy is a group of superalloys mainly made of nickel, iron and chromium. They are designed for corrosion resistance and high creep and rupture properties. Incoloy 825 round bar uses additional copper and molybdenum.

Inconel 600 have a minimum tensile strength of 550Mpa and minimum yield strength of 205Mpa.

Chromium, when added to Alloy 600 Inconel rods along with nickel, increases the alloy’s resistance to sulfur-containing compounds while providing resistance to oxidizing conditions at high temperatures or in the presence of corrosive solutions.

Inconel 625 bar can withstand high stress and a wide range of temperatures, in and out of water, as well as resist corrosion when exposed to highly acidic environments, making it ideal for marine and nuclear applications.