ASTM B-366 ASME SB-366 UNS NO2200 elbow 90deg

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

This means titanium can be used as a replacement for steel¡ªa major benefit, as it is 45% lighter than steel. It is twice as strong as aluminum and 60% denser.

Excellent corrosion resistance and reduced carbon content along with high strength make DIN 1.4301 AISI 304 long radius elbows suitable for applications requiring welding. It is a versatile alloy used in strongly corrosive electrical enclosures.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Stainless steel reducer fittings are similar to couplings, but they can be detached and attached to the pipe and then screwed back to connect them. 316 stainless steel pipe fittings are used in the water pipeline, natural gas, manufacturing and nuclear power plant industries.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

This dual phase steel butt weld excels in environments that result in premature stopping of austenitic grades. These duplex steels also protect against chloride environments and provide resistance to sulfide stress corrosion.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel pipe fittings. It is used due to its excellent corrosion resistance and high strength. Duplex S31803 fittings offer a better guarantee of corrosion resistance, but most duplex S31803 currently produced also complies with duplex S31803. 1.4462 belongs to the DUPLEX steel series. This steel has higher corrosion resistance than eg austenitic 1.4404. Therefore, the tensile yield point is about 150% higher.

These Buttweld 45 Degree Weld Elbows are manufactured to very high tolerances via hydroforming. Hydroforming results in a more uniform fitting that is easier to weld and polish.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

We hsve Elbow, ANSI B16.9 S32750 Welded Elbow, Super Duplex Steel S32750 Long Stub End, Super Duplex Steel S32750 Reducer Distributors, Super Duplex S32750 Concentric Reducer, Super Duplex Steel DIN 1.4410 Tees, SAF 2507 Super Duplex Steel Long Radius Bend, Super Duplex Steel S32750 90 deg. Elbow, Super Duplex S32750 180 Deg. Buttweld Elbow, Super Duplex S32750 180 Deg. Buttweld Elbow, ASME SA815 S32750 90 deg Elbow Suppliers, Super Duplex Stainless Steel S32750 Seamless Pipe Elbow, Super Duplex 2507 Eccentric Reducer, UNS S32750 Pipe Fittings, S32750 Pipe Fittings Stockist, Super Duplex Steel 1.4410 Short Stub End, ANSI B16.9 S32750 Super Duplex Steel Stubends.

Butt weld elbows in the Incoloy 825 series are one of the strongest and most versatile elbows types. These fittings can be easily attached to pipe because they have beveled ends that meet ASME B16.25. These elbows allow the module to create full penetration welds without any additional penetration or preparation. The fittings are welded according to the butt welding procedure, placing them on the assembly and welding in place. Welded connections in this range provide a strong and high-strength connection. These fittings are available in larger and stronger sizes compared to other grades of fittings.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

Monel 400 is widely used in Brine heaters, sea water scrubbers in tanker inert gas systems.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

ASTM A234 specification does not cover cast welding fittings or fittings machined from castings.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion and stress corrosion cracking and better thermal stability than alloy B-2. In addition, this nickel-steel alloy is highly resistant to knife-line and heat-affected zone attacks.

These Stainless Steel 304/ 304L Fittings/Fittings feature exceptional quality finishing and pressure for long life, high pressure and zero defects. We manufacture stainless steel 304/ 304L pipe fittings for end users such as marine engineering, chemical processing, hydrocarbon processing, heat exchangers, valves and pumps. And ship worldwide.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

321 Fittings cover the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes. Forging or forming operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or a combination of two or more of these operations. All accessories should be heat treated.

Incoloy 800 is an alloy whose primary constitution is made up of nickel, iron, and chromium. This particular alloy, unlike the former, has less than 50% nickel content in its chemical composition. Aside from their chemical makeup, the other points of distinction for both the alloys are their use in a specific set of applications or industries.

ASTM A403 WP 347 fittings are available in a variety of sizes and configurations. Our product range includes pipe connectors, adapters, reducers, tees, elbows, and they are also available in a variety of thread types. It is designed to provide leak-free connections suitable for a variety of applications supporting today’s major industrial markets.

Type 316 is much more resistant to sulfuric acid solutions than any other chromium-nickel type. Type 316 is resistant to acid concentrations up to 5% at temperatures up to 120¡ãF (49¡ãC). This type has excellent resistance to higher concentrations at temperatures below 100¡ã F (38¡ã C).