astm b163 nickel 200 smls pipe

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Likewise, Nickel Alloy C-276 and Hastelloy C-276 can be welded by all common welding methods (oxyacetylene is not recommended). Due to its excellent corrosion resistance, Hastelloy C-276 is used in critical applications by a wide range of industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36

These hastelloy c22 pipe are considered to be versatile due to corrosion and heat resistant. Also, it offers excellent resistance to pitting and stress corrosion cracking resistance and also resistant to a high-temperature atmosphere.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM B619 welded pipe for the pharmaceutical industry has good corrosion resistance, especially to high purity water. And they also show good resistance to corrosion by buffer solutions used to prepare pharmaceuticals if ASTM B619 UNS N10276 is also exposed to cleaning supplies.

Inconel Alloy 625 is an austenitic nickelchromium-molybdenum-niobium alloy possessing a rare combination of outstanding corrosion resistance coupled with high strength from cryogenic temperatures to 1800¡ãF(982¡ãC).
The strength of Inconel Alloy 625 is derived from the solid-solution hardening of the nickel-chromium

Hastelloy C-276 is a versatile nickel-molybdenum-chromium-tungsten alloy with excellent corrosion resistance and good machinability. While it does have good oxidation resistance up to 1800¡ãF, Hastelloy C-276 is generally not recommended for high temperature service.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

Alloy 400 Seamless Tubing has good ductility which helps to shape and form easily & are available in flat oval, elliptical, round, rectangular & square shapes with 0.030 in. to 1.250 in. OD, 0.008 in. ID & 0.003 in. to 0.280 in. wall thickness.

Welding Inconel 3″ Pipe is not necessarily more difficult to weld than stainless, just different. By following the welding procedures outlined in the header construction tips article, successful welds with Inconel 3″ Pipe are possible.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service. INCONEL 625 alloy has found to have a resistance to potable and salt or brackish water, where Chloride ions cause pitting and crevice corrosion to become established. As a result, pipelines for gathering sour gas have been built with solid (or clad) INCONEL 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Although the properties of this particular specified inconel 625 Pipe is dependent on the heat treatment used and the dimensions which include the small diameter and light walled tubing. Each Inconel 625 Pipe or tube, as per the ASTM B444 specification must undergo hydrostatic testing.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy C276 also prevents the formation of grain boundary precipitates in the weld heat affected zone, making it useful for most chemical processes in the as-welded state. It has excellent resistance to pitting and stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

Nickel 200 is a pure commercial (99.6%) resulting nickel with excellent mechanical properties and corrosion resistance, high thermal and electrical conductivity, low gas content and low vapor pressure.

Nickel alloy C-276 resists the formation of grain boundary precipitates in the weld heat affected zone, making it a candidate for most chemical and petrochemical processing applications in the as-welded state. HC276 is a nickel alloy with excellent resistance to reducing acids, sulfuric acid, hydrochloric acid, brine solutions, oxidizing chlorides and hot sea water.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

The Inconel Thick Wall Pipe has been intended for applications in general corrosion resistant and heat resistant applications.The ASME SB725 Inconel Alloy Welded Pipe is envisioned keeping in mind its use in general corrosive service and for mechanical applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The key specifications of INCONEL alloy tubes help it to cope in these demanding conditions. It consists of nickel, a high amount of chromium and a significant addition of aluminium, which enables the alloy tubes to resist the effects of a high-temperature oxidising environment. It is not, however, ideal for sulphuric conditions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Our Inconel 625 Piggable Bend is very tough at extremely high temperatures and resists corrosion caused by caustic alkalis in the chemical industry. We manufacture UNS N06600 Inconel 600 Long Radius Elbow is niobium stabilized for the aerospace industry, while Inconel WNR 2.4851 Welded Elbow has high yield strength and can be hot and cold worked.

Inconel Pipe is a nickel-chromium alloys which is utilized totally different welding forms. Inconel Pipe is most commonly utilized in procedures where high heat tolerance is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy C-276 is also one of the few materials resistant to wet chlorine, hypochlorite and chlorine dioxide. This special nickel alloy has excellent resistance to crevice corrosion and stress corrosion cracking, as well as chloride pitting. Its low carbon content minimizes carbide precipitation during welding and maintains its excellent corrosion resistance during welding. This means that C-276 is easily fabricated by welding using methods similar to those used for nickel-based alloys.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.39

No matter what your application is, no matter which part of the globe you might be in, be sure to call us for your needs for Inconel Instrumentation Tubes or other kinds such as Inconel Inconel 625 Pipe Cylinder tubes, we have what you need – at the best price you can imagine!
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy C276 Seamless Nickel Tube is a nickel molybdenum chromium alloy with added tungsten for excellent corrosion resistance in a wide range of harsh environments. The high molybdenum content makes this alloy particularly resistant to pitting and crevice corrosion.

INCONEL Alloy 625 is a blend of Nickel, Chromium and Molybdenum that provides high strength pipe or tubing, even resistant to highly corrosive environments. Due to its unique properties, it is frequently used in aerospace and marine applications, nuclear reactors, pollution control plants and chemical processing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The low carbon content in the 2.4819 alloy C276 tube minimizes carbide precipitation. Carbide precipitation is a phenomenon that occurs during welding of various alloy grades.

Nickel alloys are some of the most useful materials for making technically superior pipes and tubes for industrial applications. Their inherent properties make them useful for a wide range of purposes. Nickel alloys are particularly resistant to corrosion and can be used in high temperature environments. Because nickel alloys are highly ductile, they can be processed very efficiently into pipes and tubes while maintaining strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.44

Monel 400 Welded Pipe (NA13, N04400) offer hardness, strength and corrosion resistance with good fabrication capabilities. Monel 400 ERW Pipe can easily be welded by gas metal arc, gas-tungsten arc or shielded metal arc processes using appropriate filler metals.

Nickel-based alloys are very useful for the manufacture of high quality tubing products. One of the key reasons is that they offer excellent corrosion resistance in both aqueous and high-temperature applications.
In addition to their high melting points and resistance to oxidation and corrosion, nickel alloys are very ductile ¨C they are easily drawn out into thin tubes. They can be electroplated and are easily welded, making them suitable for use in industries where very high and low temperatures come into play.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20