ASTM B366 WPHB-2 pipe fittings elbows

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Stainless steel pipe is a kind of hollow long round steel or square rectangular material, which is widely used in industrial transmission pipelines and mechanical structural parts. In addition, with the same bending and torsional strength, stainless steel pipes are lighter in weight, so stainless steel pipes are also widely used in the manufacture of mechanical parts and engineering structures.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Stainless Steel 304 Buttweld Fittings are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in its composition.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

Stainless Steel Elbow Buttweld Welded Pipe Fittings?is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress ¨C corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres.

Unlike other types of steel such as 304 and 306, the 316l stainless steel alloy can be used in a variety of applications where high corrosion resistance is required. For example, specialists in the chemical and pharmaceutical industries use it to make surgical tools and medical implants.

A234 Pipe Elbow the radius of curvature is 1.5 times the diameter (R=1.5D). We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Made of stainless steel 304/304L, this fitting is low in carbon to minimize harmful carbide precipitation during welding and ensure corrosion resistance. Elbow meets 304 steel strength standard and 304L extra low carbon standard for quality assurance. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

Duplex UNS S32205 Butt Weld Heads feature a butt weld for maximum grip during welding and provide great strength to the connection. Therefore, ASME SA182M Duplex Steel S32205 Butt Welded Pipe Fittings can be used for high pressure and high temperature applications. Power plants, desalination plants, chemical plants, food processing plants, and the aerospace industry use dual-phase materials because of their high yield strength and good corrosion resistance.

We depend on this integral equipment to produce and deliver vital fluids at every stage, from production all the way to consumption. Sanitary elbow fittings are utilized in agricultural irrigation systems, soft drink production, beer brewing and dispensing, various plumbing systems, and more.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The SA 420 WPL6 Elbow is one of the most used types in many applications because it is needed to change the direction of a pipe line.

A tee is a type of pipe fitting that is used to divide the main flow into two streams or to combine flow from two streams. Because the form of a pipe tee resembles the alphabet “T”. The primary pipe of a Tee is frequently referred to as the main pipe or run pipe, and others as its branches.

Duplex Steel S32550 Pipe Fittings has high stress corrosion resistance. These UNS S32550 Pipe Fittings also has lower thermal expansion than austenitic stainless steels. It also has higher thermal conductivity than austenitic stainless steels, and excellent general corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids

We are a manufacturer, supplier and distributor of premium quality Nickel Alloy Forged Elbow. Our primary purpose in providing this product is to understand and meet our customers’ operational requirements. We have supplied these products to large industrial sectors for many years and have earned the trust and satisfaction of our valued customers.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We are known for providing products according to the pressing requests of our esteemed customers. Our assembled SS 316/316L pipe connectors are of high quality and can withstand high pressure and high temperatures. For the manufacture of these fittings, we select high quality raw materials. These accessories are of high quality, such as a perfect finish, durability, excellent pitting resistance, low maintenance costs and a sturdy construction.

For stainless steel sanitary fittings we offers a large selection of high purity food grade sanitary hose fittings, stainless sanitary tubing, sanitary valves and fittings, steel tubing clamps, etc. Contact us for a sanitary fittings price list.

Incoloy 800H Forgings are components manufactured from chromium nickel alloy with additions of aluminium, titanium and high carbon content.

Our inventory includes but is not limited to carbon steel, stainless steel, PVC S80, CPVC S80 and specialty alloy materials. Our highly trained staff will help you with piping, flanges, fittings, structural shapes and related components.

Monel 400? also has excellent resistance to stress corrosion cracking in most freshwaters.Our Monel Long Radius Elbow Fittings is available at various angles like 30 degrees, 45 degrees, and 90 degrees.

Grade 317 stainless steel is an improved version of grade 316 stainless steel. Fittings made from this stainless grade are known for their high strength and good corrosion resistance. Stainless steel grade 317L is a derivative of common 317 stainless steel. An L next to the grade indicates a lower carbon content.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

The major differences between these alloys are their mechanical properties which stem from the restricted compositions of alloys 800H and 800HT and the high-temperature anneals used for these alloys.

SS 316 elbows are used to change the direction of pipes. They are available in different shapes, sizes and dimensions. The carbon content of these pipes is lower than 301 and 304 grades. Therefore, 316 stainless steel welded pipe fittings are said to be a suitable choice for welding.

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.