ASTM B366 WPN pipe fittings elbows

INCONEL (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications requiring corrosion and heat resistance. The alloy also has excellent mechanical properties and has an ideal combination of high strength and good machinability.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

429 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates. The material grade can be SS 429, Type 429, WNR 1.4001, UNS S42900, AISI 429, Grade 429

Monel 400 is a nickel-copper alloy of about 67% Ni and 23% Cu.

Based on SW tee forms, the branch end will be threaded to male or female. So there are male branch tee and female branch tee, which if the tube with male NPT threads, then the tee shall be with female NPT threads.

We must review the complete catalog content to ensure that system designers and users make safe product choices. When selecting a product, the overall system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

UNS S32205, S31803 Duplex Stainless Steel Fittings is an austenitic-ferritic stainless steel with superior corrosion resistance and high strength. It has good solderability and can be soldered by a variety of methods. Grade 1.4462 (also known as UNS S31803/S32205, F51 and SS2377) fittings are a stainless acid resistant duplex steel with high strength and excellent corrosion properties.

While 300 series stainless steels are very popular, they are not universally suitable for all process piping applications. For example, even though they are corrosion resistant, 300 series formulations do not perform well in the presence of chlorides. In these cases, steels with much higher alloy contents such as molybdenum, chromium and nickel are preferred.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material.

Ordinary steel fittings are susceptible to chloride stress corrosion cracking. However, ASME SA815 Duplex Pipe Reducers are better because they inhibit deformation and avoid corrosion cracking even at high temperatures. UNS S31803 Duplex Steel Tee is said to have amazing resistance to toxicity and elasticity, so it is used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 end caps are highly resistant to intergranular corrosion and are therefore used for termination connections.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

Therefore, stainless steel elbows are widely used in high temperature applications. A403 WP316 elbows are widely used to change the direction of pipes and are available in different diameters, shapes and sizes. A403 WP304 elbows can be easily welded, but the material may face localized corrosion due to the risk of intergranular corrosion.

The source raw material for ASTM A234 WPB steel pipe fittings may come from steel pipes such as ASTM A106 Gr.B and C. Also from steel plates like ASTM A285 Gr.C, ASTM A516 Gr 70, ASTM A572 etc.

Duplex steel S32205 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal switch, etc.

Stainless Steel Elbow Buttweld Welded Pipe Fittings?is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress ¨C corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres.

The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

Monel 400? also has excellent resistance to stress corrosion cracking in most freshwaters.Our Monel Long Radius Elbow Fittings is available at various angles like 30 degrees, 45 degrees, and 90 degrees.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

This happens because the specific heat starts to increase dramatically as the transition temperature of 880 ?C is reached.

ASTM A234 is Standard Specification for wrought or forging steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

Alloy 825 threaded fittings are components designed to contain concentrations of chromium, nickel and iron with additions of molybdenum, titanium and copper. Threaded fittings in this range have threads that correspond to the threads of the pipe module. This allows them to be easily secured to the threads of subsequent pipe assemblies. The connection securely seals the assembly; however, in some applications these fittings can be easily welded into place. Soldering the assembly is not recommended, as threaded joints that are already sealed may experience thermal expansion due to the heat of welding, which can cause cracks or dents in the wiring.

Hastelloy C276 fittings can withstand very high pressures and come with a one-year warranty. The V shape is perfect for welding and fabrication.

Carbon steel pipes are a popular choice for a variety of applications. Ventilation and steam ducts, municipal ducts and sewage ducts are usually made of carbon steel. It helps if you consider additional properties that may be required in chemicals or temperature. The above details can help you determine which steel is right for you.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination. A general summary of the fitting classes applicable to all WP grades of stainless steel follows. There are no classes for the CR grades.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.

We supply Stainless Steel 316H Elbow Pipe Fittings to a variety of customers including fabricators of pressure vessels, industrial boilers and heat exchangers. Fusion welding performance for Stainless Steel 316H Reducer Pipe Fittings is excellent both with and without fillers. Stainless Steel 316H Tee Pipe Fittings, with its higher carbon content has application at elevated temperatures, as does the stabilised grade 316Ti.

Rotary draw bending can also utilize mandrels.