ASTM B366 WPNC pipe fittings elbows

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The mechanical properties of Inconel 718 fittings are very interesting, which makes it popular in various industries. For example, ASTM B366 UNS N07718 Inconel 718 fittings have high creep rupture strength at elevated temperatures up to 700 degrees Celsius.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

Alloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

We offer ASTM A815 Duplex Steel S31803/S32205 Pipe Elbow with good elasticity and high resistance to toxicity. Duplex Steel S31803/S32205 Caps Are Better Choice For Common Steel Fittings At High Temperatures And Inhibited Deformation ASME SA815 Duplex Steel DIN 1.4462 Reducers Are Sensitive To Chloride Stress Corrosion Cracking In The Chemical Industry.

304 has good oxidation resistance in intermittent duty up to 870¡ãC and continuous duty up to 925¡ãC. However, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

ss 304L seamless pipe fittings are ideal for installation in pipes subject to high pressure, corrosion and vibration conditions. It is suitable for pressurized and non-pressurized applications; it is available in a variety of construction materials, depending on the nature of the medium to be transported.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Monel 400 provide superior quality for different types of mechanical, and general engineering applications.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

Monel 400 Tee is a nickel-copper alloy resistant to seawater and steam at high temperatures, as well as salts and corrosive solutions. Monel 400 Pipe Elbows operate over a wide temperature range and are available in a variety of styles for a variety of products.

316 Stainless Steel Pipe Fitting is widely used in the connection of pipe fittings. Our company has been manufacturing and supplying stainlesss steel elbow for years of experience. With the advantages of huge stock ability, we could provide you the quick delivery. Besides, with a strict quality control system, we could guarantee the quality.

Another thing to note about Inconel 718 Elbows is that they have excellent weldability, including resistance to post weld cracking.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

Incoloy 800HT Buttweld Pipe Fittings play an important role where fluids are getting operated at high temperatures and extreme pressures. Pipe Fittings are mainly used in a piping system to change the flow. By using the types of buttweld fittings the industrial applications are working smoothly and performing the flow of fluids from one place to another

Stainless steel is also composed of at least 10.5% chromium, a metallic element that gives the metal its finish and superior corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

While fitting and sizing bent pipes might seem complex at first, a basic understanding of the measurements used make matching them to your existing system or integrating them into a new design straightforward.

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

The SA 420 WPL6 Elbow is one of the most used types in many applications because it is needed to change the direction of a pipe line.

Stainless steel 304 fittings are one such type of pipe, offering high tensile strength, corrosion resistance and a flawless finish. Excellent corrosion resistance and reduced carbon content along with high strength make DIN 1.4301 AISI 304 long radius elbows suitable for applications requiring welding. It is a versatile alloy used in strongly corrosive electrical enclosures.

Grade WPB is the most common material for medium and high temperature pipelines in these standards. W stands for “weldable,” P for “pressure,” B for “grade b,” and Y for “yield strength.”

Our WNR 1.4462 Duplex Steel S31803 Pipe Fittings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

Knowing the finish of these steels can be helpful if your pipes are visible and appearance is on the list of considerations. Stainless steel is usually glossy and can retain that gloss if exposed to weather and other factors. Carbon steel, on the other hand, is darker in color and usually has a matte finish when painted. Unfortunately, it can also rust and look bad if left exposed. Galvanizing is also an option.

Our stainless steel 310S butt weld fittings are said to be the most commonly used and easiest to use, offering more forms and finishes than any other grade in the stainless steel range. Since it is the low carbon form of the alloy, these SS 310 butt welded pipe fittings are used to simplify production.