ASTM B366 WPNCMC pipe fittings reducers

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

SS 316 elbows are used to change the direction of pipes. They are available in different shapes, sizes and dimensions. The carbon content of these pipes is lower than 301 and 304 grades. Therefore, 316 stainless steel welded pipe fittings are said to be a suitable choice for welding.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

S31803 is resistant to stress chloride corrosion cracking, and duplex stainless steel exhibits the best corrosion performance in high temperature and sulfide environments.

Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Nickel Alloy 600 a number of benefits including: Good oxidation resistance at high temperatures, Corrosion resistance to both organic and inorganic compounds and Resistance to chloride-ion stress corrosion cracking.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

A welded ASTM A403 Stainless Steel Weld Fittings is made up of pieces of steel plates. Stainless Pipe Fittings are made up of 10% nickel and high chromium content.

Super alloys are also known as high performance alloys. They contain many elements in a variety of combinations designed to provide unique material properties for specific applications.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. We offer these DIN 1.4301 Stainless Steel Butt Weld Fittings in different forms like Tees, Reducers, Cross, Stub Bends, Elbow and End caps. SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties. This type of steel also shows excellent oxidation resistant properties. We develop all our products under international standards in top notch infrastructure facility to attain highest scales of quality.

ASTM A234 WP11 pipe fittings mean the pipe fittings which material are ASTM A234 WP11,they are used for the pressure piping systems of moderate and high temperature services.ASTM A234 is the standard of butt welding pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WP11 is one of the steel grade in this standard.

Nickel Alloy 201 is the low carbon version of Nickel 200 suitable for forming by deep drawing and spinning into combustion boats and the continuous stamping of strip into electronic components. The material is selected for caustic salt evaporators above 315 deg C (600 deg F) as the extended exposure of Nickel 200 above this temperature can lead to the formation of graphite.

The accumulation of copper to the grade 904L alloys makes it resistant to corrosion, especially phosphoric, acidic, and sulphuric acid.It Is A Kind Of Corrosion And Heat Resistant Steel.

Annealing between 1050 and 1080¡ãC can be done after forging, followed by rapid quenching, especially to restore corrosion resistance, but there is no heat treatment to harden 316L.

Its toughness lends itself to use in nuclear power plants, mining, cement, and the oil and gas industry.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

S32750 (2507) is a duplex stainless steel that combines many of the excellent properties of ferritic and austenitic steels. Due to its high chromium and molybdenum content, it exhibits excellent resistance to pitting, crevice and uniform corrosion. The two-phase microstructure ensures that the steel has high resistance to stress corrosion cracking and high mechanical strength. In addition, it also has the characteristics of strong resistance to chloride pitting, high thermal conductivity and low thermal expansion coefficient.

This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 pipe bend has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack.

304 fittings are standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

Alloy 400 pipe bend and elbow have excellent corrosion resistance together with increased strength and hardness.

We are engaged in the manufacture and supply of high quality duplex steel s31803 pipe fittings and duplex steel s32205 pipe fittings. These duplex s31803 seamless pipe fittings and duplex s32205 welded pipe fittings are available in various sizes according to customer requirements.

Duplex Steel UNS S31803 / S32205 Butt Welded Pipe Fittings, we make sure to provide you with a product that meets the required quality standards and has a longer service life. Our ASTM A815 Duplex Steel S31803/S32205 Elbows limit localized corrosion types and are essential for applications requiring a compact yet flexible seal.

The strength of 800H is achieved by controlled levels of carbon, aluminum and titanium along with a 2100¡ãF minimum anneal to achieve a grain size of ASTM 5 or coarser.

Inconel 625 elbow has also found its way into the aircraft industry, particularly for exhaust equipment, fuel lines, heat exchanger casings, and rocket components.

Grade 304 stainless steel is generally considered the most common austenitic stainless steel. It contains a high nickel content, typically between 8 and 10.5 weight percent, and a substantial amount of chromium around 18 to 20 weight percent. Other major alloying elements include manganese, silicon and carbon. The rest of the chemical composition is mainly iron.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Titanium’s thermodynamic properties do not allow it to melt in normal conditions, because it becomes more reactive at elevated temperatures and can catch fire if the oxygen molecules are present in its environment.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.