ASTM B366 WPNICMCS fittings Incoloy 800H elbow pipe fittings

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Incoloy 800/800H/800HT pipes are mainly made of nickel-iron-chromium alloy, which has excellent resistance to carburization and oxidation, and has good tensile strength. These steel alloys are the same. The only difference is the percentage of aluminum and titanium in these alloys. However, if we talk about products like pipes and pipes, they are considered to be the most demanding and widely used products. Due to their exceptional properties and superior performance, these products are used in several industries and applications.

Their Inconel surface becomes corrosion resistant due to the formation of patina. Incoloy material has a higher iron content and is less expensive than Inconel products. They are also resistant to corrosion from a variety of materials, including steam and acids. These materials are resistant to seawater, acid gas and saltwater environments.

INCOLOY 800H is a controlled composition derivative of INCOLOY? alloy 800 (UNS N08800). Applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service.

ASTM B408 Incoloy 825 bar is titanium stabilized to resist pitting and intergranular corrosion after fabrication, especially welding, including heating in the critical sensitization temperature range (650¡ãC – 760¡ãC).

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

Grade 825 Incoloy alloy used to make butt welded pipe fittings has high corrosion resistance. It contains a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic structure.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Alloy 800 bolts (WNR 1.4876 bolts) resist embrittlement due to nickel-containing sigma-phase precipitation and chloride stress corrosion cracking. It has further modifications to the combined levels of aluminium and titanium (0.85-1.20%) to ensure optimum high temperature performance. These are called UNS N08800 bolts and are actually for high temperature structural applications. At the same time, the corrosion resistance of these bolts is quite high. We offer these types of alloys in all material grades, sizes and sizes.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

Nickel alloys pipe fittings are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance. Because of its unique properties, it’s used in a variety of equipment spanning multiple industries.

Incoloy 800 / 800h / 800ht round bars are nickel-iron-chromium alloys with high tensile strength and excellent corrosion resistance. These are also in a carburized state at high temperatures. Incoloy 800 is a pure grade material, slightly modified to 800 h grade. These round bars are suitable for elevator temperatures in construction applications.

Incoloy 825 flanges manufactured in accordance with ASME B16.5 are made of annealed material only and are rated for a maximum temperature of 538°C [1000°F]. It is available in a variety of styles including weld neck, slip-on, blind hole, threaded, lap joint, long weld neck and socket weld. Flanges can be forged to ASTM B564 UNS N08825 or made of ASTM B424 Gr. N08825 plate (blind plate and plate flange only), nominal composition 42Ni-21.5Cr-3Mo-2.3Cu.

ASTM B564 UNS N08810 Blind Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM B564 Nickel Alloy 200 201 Long Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy alloys belong to the Inconel family. This means that the alloy can be used at high temperatures. At high temperatures, a problem associated with certain grades of stainless steel is oxidation. The chemical composition of Incoloy 800 fasteners allows them to be used at high temperatures. The higher the carbon content, the more chance they have to withstand high temperatures. Therefore, manufacturers produce derivative alloys of UNS N08800 bolts, called Alloy 800H and Alloy 800HT, which have slightly different chemical compositions.

Incoloy 825 Flanges?are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Talking about the general properties exhibited by Incoloy 800 grades, Incoloy 800/800H/800HT pipe exhibits excellent corrosion resistance, pitting resistance in chloride environments, resistance to various acidic environments, good general corrosion resistance, flow resistance Grain alloy crack corrosion, crevice corrosion resistance and easier weldability and hardness.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Alloy 800H plate (UNS N08810 plate) is a widely used structural material for equipment that must have high strength and resist carburization, oxidation and other detrimental effects of high temperature exposure.

Titanium additions stabilize the alloy against intergranular corrosion susceptibility by appropriate heat treatment. The resistance of Incoloy? 825 to general and localized corrosion under a variety of conditions makes the alloy versatile.

Grade 1.4529 is a high alloy stainless steel of austenitic structure and can be classified as a nickel alloy (by US standards). Delivered in a supersaturated condition, it exhibits resistance to intergranular corrosion, pitting and stress corrosion, salt, seawater, chlorides, sulfuric acid, phosphoric acid, and other highly concentrated liquid and gaseous corrosive chemicals. At the same time, nickel and nitrogen can not only improve the stability, but also reduce the tendency of separation of crystallization thermal process or welding process is better than the nitrogen content of nickel alloy. 926 has some corrosion resistance to chloride ions due to its localized corrosion characteristics and 25% nickel alloy content.

Age-hardenable Inconel 718 Heavy Duty Hex Bolts can be easily fabricated, even into complex parts. Inconel UNS N07718 bolts are also commonly found in gas turbine blades, seals and combustors, as well as turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, chemical processing and pressure vessels, etc. Other uses for this alloy tend to be in gas turbine components and cryogenic storage tanks. Jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Incoloy 800 Flanges ASME B16.5 We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The Alloy 800 series (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that provide high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800 (UNS N08800), Alloy 800H (UNS N08810) and Alloy 800HT (UNS N08811) have the same nickel, chromium and iron content, except for the total titanium and aluminium content (0.85 to 1.2%) to ensure optimum high temperature performance.

The chemical balance allows the alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. 800HT will not become embrittled even after long periods of usage in the 1200-1600 deg F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. 800HT can be welded by the common techniques used on stainless steels.