ASTM B366 WPNICMCS fittings Incoloy 800H pipe fittings

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

They are used for high temperature service, where resistance to oxidation and carburisation are required. For optimum stress rupture properties, or for pressure vessel service above 815¡ãC, Incoloy 800H or Incoloy 800HT should be used.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.

Inconel 825 is a nickel alloy that can be used in businesses that handle high thermal reactions. For example, Inconel 825 round bars are commonly used in industries such as air pollution control, chemical and petrochemical, steel pickling, ore processing, petroleum refining, offshore oil and gas production, food processing, and waste disposal.

Typical applications for the alloy include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. The alloy is also used for valves, fittings and other components exposed to corrosive attack from 1100 to 1800 deg F.

The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties.

Both alloys have the same chemical composition as Alloy 800 plate (UNS N08800), but the carbon content is higher in both grades – (0.05 – 0.10%) in Alloy 800H and (0.06 in Alloy 800H) – 0.10% ) 800HT board.

Incoloy 800H round bars are also known for their resistance to oxidation and carburization, even at high temperatures. This means that these bars are ideal for high temperature applications. This feature has made Incoloy 800HT round bars popular in the petrochemical industry. The presence of nickel in the alloy contributes to its resistance to chloride stress corrosion cracking, which is indeed an essential feature of alloy 800h rods.

ASTM B408 Incoloy 825 bar will remain stable with prolonged exposure to elevated temperatures. It will also avoid corrosion in many aqueous environments, where molybdenum also helps resist pitting and crevice corrosion.

Inconel 825 fasteners have excellent resistance to both reducing and oxidizing acids in addition to general corrosion. These Incoloy 825 fasteners also resist stress-related corrosion cracking, localized corrosion such as pitting and crevice corrosion. Incoloy 825 is particularly resistant to acids such as sulfuric and phosphoric acid. Austenitic stabilizing elements such as nickel, one of the main alloying agents for nickel alloy 825 hex bolts, remain unchanged even in high temperature environments. Since the structure remains unchanged, the DIN 2.4858 studs are less likely to deform.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. Molybdenum and nitrogen contents significantly improve pitting and crevice corrosion resistance in halide media. At the same time, nickel and nitrogen not only ensure the stability of the metallographic phase, but also reduce the tendency of intergranular segregation during thermal process or welding process better than nitrogen content. Nickel alloy. 926 has exceptional corrosion resistance in chloride ion media due to its excellent localized corrosion resistance and 25% nickel alloy content.

DIN 1.4876 Rounds can work over a range of temperatures and pressures and exhibit excellent mechanical properties. These components have a minimum tensile strength of 600mpa and a minimum yield strength of 275mpa. ASTM B408 Incoloy 800 Precision Ground Rods are designed to have a uniform cross section. The strips are dimensionally and geometrically accurate.

Inconel 725 Nuts, also known as UNS N07725 Nuts, are highly corrosion resistant and age hardenable for extreme strength. It is used in a wide range of severely corrosive environments. Age hardened Alloy 725 nuts are twice as strong as annealed Alloy 625. Inconel 725 Hex Nuts are an excellent choice for the petrochemical and process industries. They are also commonly used in marine applications where high strength fasteners that resist seawater corrosion, pitting and crevice corrosion are required.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

Incoloy 825 is a nickel-chromium austenitic alloy. Incoloy 825 round bars have a round cross section and are embedded with an excellent chemical composition. Alloy 825 round bars can be alloyed with copper, molybdenum, and titanium to increase resistance to corrosive and oxidizing media.

It was developed to provide exceptional corrosion resistance in both oxidizing and reducing environments.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.

Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content. At high temperatures, it has resistance to oxidation, carburization and vulcanization as well as fracture and creep strength.

Incoloy 800 bolts are best suited for applications that require stable construction and good strength over prolonged exposure to high temperatures. These bolts are used in a variety of industries involving corrosive environments and high temperatures. The Incoloy 800 series of nickel alloys includes Incoloy 800, 800H and 800HT. All of this is the same except for the higher carbon content in the 800H alloy and the addition of about 1.20% aluminum and titanium to the 800HT. Incoloy 800H offers improved stress rupture properties over 800. Incoloy 800HT improves this further to ensure optimum high temperature performance.

Incoloy 800/800H/800HT are solid solution nickel chromium iron alloys with small additions of aluminium and titanium to improve corrosion and oxidation resistance.

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

INCOLOY Alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for the manufacture of equipment requiring corrosion resistance, heat resistance, strength and stability, operating temperatures up to 1500¡ãF (816¡ãC) ).

N08825 Blind Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Incoloy 800HT RTJ Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

NAS 800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Incoloy 800 is a popular choice in the oil and gas industries because it can withstand sour gas and high chloride environments.

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.