ASTM B366 WPNICMCS fittings Inconel 718 N07718 dairy pipe fittings

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

B564 601 Spade Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

In oxidizing conditions, INCONEL 600 has better corrosion resistance than Alloy 200 and Alloy 201.

Inconel 718 is often used in gas turbine components and cryogenic storage tanks. Jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools. Other popular uses are high-strength bolted connections and downhole shafting.

Some applications suitable for Inconel 625 include seawater, aerospace and chemical processing. About Seawater Inconel 625 is a common choice due to its excellent corrosion resistance, fatigue strength and high tensile strength. Not to mention its strong resistance to chloride ion stress corrosion cracking. Propeller blades, subsea motors, and subsea cable sheathing are good applications for Inconel 625, where the bar becomes wire once it passes through a certain minimum diameter, in which case the wire can be used for mooring cables.

This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 1090¡ãC (2000¡ãF).

Inconel 718 Hex Nuts offer high strength and corrosion resistance. Additionally, they are known for their high strength capabilities and 1800¡ãF availability. The excellent corrosion resistance of Inconel 718 at high temperatures is due to the nickel-chromium content, even when resisting chloride stress corrosion cracking. Adding molybdenum to the alloy helps prevent pitting corrosion.

Alloy 600 (UNS N06600) is a nickel-based alloy with excellent carburization and good oxidation resistance at elevated temperatures. This alloy has long been used in the heat treatment industry for the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.

Due to the alloy’s good corrosion resistance, Inconel 718 Hex Head Bolts have been used in food processing equipment, caustic solutions, and general corrosion resistant parts and structures.

Little or no corrosion occurs in dry gases such as chlorine or hydrogen chloride at room temperature and high temperature. At temperatures up to 550C in these media, this alloy has proven to be one of the most corrosion resistant common alloys.

Since Inconel uses nickel as its primary alloying agent, the use of Inconel 718 fasteners at elevated temperatures has no negative effect on the application or the equipment being used.

Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Nickel Alloy 600 a number of benefits including: Good oxidation resistance at high temperatures, Corrosion resistance to both organic and inorganic compounds and Resistance to chloride-ion stress corrosion cracking.

Inconel 625 round bar has the following properties: Excellent fatigue and thermal fatigue capabilities, high tensile, creep and rupture capabilities Excellent resistance to oxidation, excellent weldability and brazability. Chloride stress degradation destroys tolerance.

High-strength versions of these Inconel 718 butt weld flanges are increasingly found in oilfield applications due to increasingly demanding environments.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000¡ãF and down to as low as cryogenic levels.

Inconel 600 Flange,Alloy 600 Flange (UNS designation N06600) is a nickel-chromium alloy designed for use in applications from cryogenic to elevated temperatures in the range of 2000 ¡ãF (1093 ¡ãC). Alloy 600 is non-magnetic and readily weldable.

Inconel 718 Tubing is used in gas turbine or also known as gas turbine applications. A gas turbine is a continuous device, a type of internal combustion engine.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Process equipment used in the production of chlorinated and fluorinated hydrocarbons.

ASTM B564 UNS N02200 Flange Nickel 200 is a 99.6% pure nickel alloy and one of the toughest metals in existence. It exhibits excellent mechanical properties and high thermal and electrical conductivity. Additionally, Nickel 200¡¯s beneficial properties and its chemical composition make it easily fabricable and highly resistant to corrosive environments

Inconel 718 fasteners are ideal for extreme environments where oxidation and corrosion resistant bolts are required, even when subjected to pressure and heat.

Inconel 625 flat washers offer good corrosion resistance at elevated temperatures and high-temperature stability at 2200¡ãF. They also retain their strength and resist heat in and out of corrosive environments. This makes these flat washers perfect for applications ranging from heat shields to saltwater applications.

Inconel 601 flanges are made of nichrome. Its material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron. And it has different types such as socket welding flange, butt welding flange, Inconel 601 sliding flange, orifice flange and so on. Flanges made of this material are strong, resistant to acids, reducing agents and oxidation, and are harder to resist corrosion in many harsh environments.

The alloy 601 also has good resistance to aqueous corrosion.

There are different types of flanges such as the Alloy 625 Slip On Flange and others. All these types belong to the specifications ASTM B564 for nickel alloy, Inconel, monel and hastelloy falnges.

Alloy 625, commonly known as Inconel 625, is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb).

Production of caustic alkalis particularly in the presence of sulfur compounds.

The alloy 201 flanges are used to make an alloy of stainless steel. Nickel 201 flanges are made of an alloy of nickel and chromium with having some portion of silicon, iron, and manganese. These nickel alloy 201 flanges are also used in turbine as well as desalination plants, where seawater gets converted into freshwater.

B564 601 Spade Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Chromium, when added to Alloy 600 Inconel rods along with nickel, increases the alloy’s resistance to sulfur-containing compounds while providing resistance to oxidizing conditions at high temperatures or in the presence of corrosive solutions.