ASTM B366 WPNL pipe fittings Nickel Alloy 201 elbows

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

The stainless steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius.

In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.

It is even resistant to strong liquids such as sulfuric acid, wet chlorine gas, chloride solutions, hydrochloric acid and most organic acids. However, it can burn in air and is the only element that will burn in the presence of nitrogen.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

As a butt weld fitting, it works with lap flanges. The use of stainless steel short pipe ends and lap flanges can effectively reduce pipeline maintenance costs. In stainless steel piping systems or advanced systems, we can choose low-grade lap flanges with stainless steel short pipe ends as an alternative to flanged connections instead of butt-welded flanges, effectively reducing manufacturing costs.

904L (N08904, 14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low-carbon, high-nickel, molybdenum austenitic stainless acid-resistant steel, which is a proprietary material imported from French H¡¤S Company. It has good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride-containing media Excellent pitting corrosion resistance, as well as good crevice corrosion resistance and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 ¡ãC, and has good corrosion resistance in acetic acid of any concentration and temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

The greater content of alloying elements like chromium, molybdenum, and nitrogen in SD UNS S32750 tee helps material in withholding crevice corrosion and pitting. SD UNS S32750 cross is combining greater mechanical strength and with good ductility with resistance to corrosion in a different atmosphere.

HASTELLOY X pipe bend is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres.

Incoloy 800H Forgings are components manufactured from chromium nickel alloy with additions of aluminium, titanium and high carbon content.

Monel alloy K-500 pipe bend and elbow have been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH’s (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking.

Stainless steel 310S differs from wrought iron, which contains little or no carbon, which also has variations and combinations of production routes. Stainless Steel 310 End Cap Butt Weld Fitting is an iron and carbon alloy containing less than 2% carbon and 1% manganese and small amounts of silicon, phosphorus, sulfur and oxygen.

Its properties make it perfect for heavy-duty applications and those that require a high melting point and toughness under the harshest conditions.

NAS 800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel grade 446 pipe fittings is most commonly used, it also contains molybdenum, and little contains nickel alloy. This steel is suitable to use in elevated temperature and comes with slightly low carbon contents. Furthermore, the presence of titanium metal makes it stabilize the structure of stainless steel against the chromium carbide precipitation.

Made of stainless steel 304/304L, this fitting is low in carbon to minimize harmful carbide precipitation during welding and ensure corrosion resistance. Elbow meets 304 steel strength standard and 304L extra low carbon standard for quality assurance. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

Nickel Alloy 600, also sold under the brand name Inconel 600. It is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures.

Copper-nickel or copper-nickel elbows are moderately strong and commonly found in marine saltwater applications.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications.

These duplex accessories are supplied in various industries such as brewing tanks, boiler construction and desalination plants. We stock a full line of 2205 Duplex Fittings to meet your piping requirements.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Duplex steel butt welded pipe fittings are a stainless steel alloy with a dual microstructure, which is the reason for their exceptional mechanical strength and excellent corrosion resistance. Fittings manufactured to ASTM A815 specifications are manufactured with seamless construction or welding. While A815 S31803 is a specification that allows for different forging or forming operations; it also covers these fittings, for example duplex steel fittings can be produced by manufacturers using a combination of two or more processes.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service. In power generation, superheater and reheater tubing has also employed the material.

ASTM A403 WP304L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

304L stainless steel construction. It is composed of chromium-nickel material and has very good corrosion resistance. Couplings are suitable for unthreaded pipes in air, water, oil and gas applications.