ASTM B424 UNS N08825 orifice plates contains small amounts of titanium

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

This Incoloy 800HT board has improved high temperature properties. When we talk about its hardness, this ASME SB409 N08811 bar comes in soft, quarter hard, spring hard, etc. Furthermore, these plates have mechanical and chemical properties.

Inconel Alloy 600 tubing is made from a non-magnetic, nickel-chromium alloy known for its good oxidation resistance at high temperatures. In fact, Inconel Alloy 600 (UNS N06600) was designed for use from cryogenic to elevated temperatures up to and surpassing 2000 degrees F. Inconel Alloy 600 tubing possesses great mechanical properties, a good combination of high strength with good workability, and is weldable without difficulty. Inconel? Alloy 600 is not precipitative hardenable, it is hardened and strengthened solely through cold work.

Similar to Inconel grades, Incoloy grade alloys have nickel and chromium as the main base elements. The only difference between these two alloy classes is their chemical composition. Inconel alloys contain almost more than 50% nickel, while Incoloy alloys are not only less than 50% nickel, but the alloys also contain iron. Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries.

Incoloy 800 is an alloy with a higher content of iron. Due to the alloy having a higher content of ferrous, and lower content of nickel, the cost of Inconel 800 becomes low.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

Incoloy A-286 stud bolt is a Fe-25Ni-15Cr base superalloy reinforced by molybdenum, titanium, aluminum, vanadium and trace boron. It has high yield strength and durability, creep strength below 650 ¡æ, good processing plasticity and satisfactory welding performance. Incoloy A286 is a Fe-25Ni-15Cr based superalloy reinforced with additions of molybdenum, titanium, aluminum, vanadium and trace amounts of boron. It has high yield strength, durability and creep strength, good workability and good weldability at 650¡æ.

Alloy 800 Coils are also used in extruded tubing for ethylene and steam methane reformers. The higher creep rupture strength of the Nickel 800 sheet is a result of the aluminum, carbon and titanium content.

The nickel content of Alloy 825 makes it resistant to chloride stress-corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.

Alloy 800H rods are designed to have a uniform cross-sectional area and can be produced in square, round or rectangular sizes. Versatile ASTM B408 UNS N08800 rods are rigorously tested to detect and eliminate any defects in these robust assemblies.

Round bar ranging from 3/4″ to 6″ diameter, and light gauge sheet and plate. Incoloy 800 H material can be supplied in random lengths, cut to order or machined to customer requirements. Machining includes drilling, threading, milling, CNC shapes, turning, tapping, flanges and others.

Inconel 825 fasteners have excellent resistance to both reducing and oxidizing acids in addition to general corrosion. These Incoloy 825 fasteners also resist stress-related corrosion cracking, localized corrosion such as pitting and crevice corrosion. Incoloy 825 is particularly resistant to acids such as sulfuric and phosphoric acid. Austenitic stabilizing elements such as nickel, one of the main alloying agents for nickel alloy 825 hex bolts, remain unchanged even in high temperature environments. Since the structure remains unchanged, the DIN 2.4858 studs are less likely to deform.

ASTM B564 Uns N06600 Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content. At high temperatures, it has resistance to oxidation, carburization and vulcanization as well as fracture and creep strength.

INCOLOY 800H is widely used in Power generation, superheater and reheater tubing have also employed the material. Heat treatment retorts, muffles jigs and fixtures have also used this material to great effect.

N08825 Blind Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

ASME B564 800 Incoloy Reducing Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization.

200 Nickel Alloy Blind Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

ASME SB564 Alloy 601 socket weld flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

ASTM B564?INCOLOY 825 FLANGES Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Alloy 800 bolts (WNR 1.4876 bolts) resist embrittlement due to nickel-containing sigma-phase precipitation and chloride stress corrosion cracking. It has further modifications to the combined levels of aluminium and titanium (0.85-1.20%) to ensure optimum high temperature performance. These are called UNS N08800 bolts and are actually for high temperature structural applications. At the same time, the corrosion resistance of these bolts is quite high. We offer these types of alloys in all material grades, sizes and sizes.

Alloy 825 flat bar (UNS N08825) has good mechanical properties from low to moderately high temperatures. However, exposure to temperatures above 1000 degrees Fahrenheit can cause microstructural changes that significantly reduce ductility and impact strength.

Incoloy 800H and 800HT are members of the Incoloy 800 family of alloys and have the same chemical composition, but slightly different levels of carbon, titanium and aluminum. We manufacture Incoloy 800/H/HT fasteners with excellent resistance to oxidation, water and reducing environments. Due to their excellent tensile strength and toughness, these fasteners can operate efficiently in high temperature and high pressure environments.

800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures. High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content. Nippon Yakin provides this product in plate, sheet, and strip forms.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Incoloy 800 fasteners resist oxidation at high temperatures, a problem with most stainless steel alloys. Fasteners made from Incoloy 800 are also in great demand in petrochemical and chemical processing. Even when exposed to very high temperatures, Incoloy 800H fasteners maintain a very stable structure, making them very practical and sought after in many industries.

Incoloy 800HT Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM B564 UNS N08810 Blind Flanges Incoloy 800 / 800H / 800HT Flanges are furnished with nickel-chromium-iron alloys that intend outstanding resistance and strength at harsh environments. The flanges exhibit superior resistance to chloride stress corrosion cracking and crevice corrosion. Even more, it also shows superior intergranular corrosion, stress rupture and creepy aspects. The welding of these flanges is done using various techniques such as MIG, TIG and more.