ASTM B564 Alloy C22 Weld Neck Flanges withstand acid attacks of hydrochloric acids

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C276 material is designed with good mechanical properties. They have a minimum tensile strength of 601Mpa and a minimum yield strength of 204Mpa. This material makes the alloy easy to machine and elongate.

Hastelloy C276 has a low carbon content to minimize grain boundary carbide precipitation during welding to maintain corrosion resistance in the heat affected zone of the welded joint

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

Hastelloy is a term used to describe nickel metal that has been alloyed to increase corrosion resistance. This is primarily done through the addition of molybdenum and chromium.It is commonly used for pipes and valves in the chemical and petrochemical industries. It is also used in reactor vessels in the chemical and nuclear industries.

These alloys of flanges are basically non-magnetic but feature superior higher strength at a temperature range of 1500 degree F. whereas show good oxidation resistance up to 2200 degree F.

Strengthening of super alloy Hastelloy B2 pipe bend is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

Hastelloy C276 Specialty Bolts are a standard grade of austenitic stainless steel fasteners based on 15% chromium and 57% nickel.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available.

Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

Alloy B2 is a highly resistant material to most organic and inorganic acids. It is a reduction resistant material.

Alloy B2 (UNS N10665 / W.Nr. 2.4617) is a solid solution strengthened, nickel-molybdenum alloy, typically used in extreme reducing conditions.

Hastelloy C276 Flanges Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it. The Hastelloy C276 Flanges have high melting point of 1370 degrees Celsius. This high melting point allows for higher operating temperatures of the flanges. The material also has 790MPa minimum tensile strength and 355MPa minimum yield strength.

Hastelloy C276 is one of the few materials that can withstand the corrosive effects of wet chlorine, hypochlorite and chlorine dioxide.

The Hastelloy C276 round tube is manufactured from a high temperature heat resistant alloy, which contributes to its widespread use in the power industry. Whereas, Hastelloy C276 pipe exhibits outstanding properties such as high wear resistance, corrosion resistance and longer service life due to the raw materials used in its processing.

It has great resistance to stress-corrosion cracking and pitting. Hastelloy B-2? also features hydrochloric acid resistance at all concentrations and temperatures.

Our Hastelloy B2 Ring Joint Type Flanges is not recommended for use in the presence of ferric or cupric salts as these salts may cause rapid corrosion failure. Ferric or cupric salts of these Hastelloy B2 Nippo Flanges may perhaps develop when hydrochloric acid comes in contact with iron or copper.

Hastelloy C276 boards can be easily welded using the most traditional processes. In general, 2.4819 Hastelloy C276 Coil does not require post weld heat treatment. Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy C22 flanges are available in different sizes and shapes. One can easily get it at their doorstep as per their specifications.

There are different types such as the Hastelloy B2 Slip On Flanges , socket weld flanges, and welded neck flanges. These have 790MPa minimum tensile strength, 355MPa minimum yield strength and 40% elongation rate.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce.

Hastelloy B3 pipe is significantly resistant to corrosion resistance at reducing atmosphere. Hastelloy B2 pipes are having excellent resistance to non-oxidizing acid and sulphuric acid.

Hastelloy B2 Round Pipes (UNS N10665) is used for most chemical process applications in the welded condition, gasoline refining.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Alloy C276 Seamless Nickel Tube is a nickel molybdenum chromium alloy with added tungsten for excellent corrosion resistance in a wide range of harsh environments. The high molybdenum content makes this alloy particularly resistant to pitting and crevice corrosion.

C-276 alloy is normally solution heat-treated at 2050¡ãF (1121¡ãC) and rapid quenched. If possible, parts which have been hot-formed should be solution heat-treated prior to final fabrication or installation.

Hastelloy fasteners such as bolts, screws, nuts and threaded rods are ideal for use in a variety of moderately to severely corrosive acid environments. The most common grade of Hastelloy fasteners is Hastelloy C276 (2.4819), which is one of the most versatile corrosion-resistant nickel alloys, surpassing Inconel or Monel. There are also other special grades of Hastelloy fasteners that can address more niche corrosion problems.