Astm F52 A350 Lf2 Long Weld Neck A694 F60 Blind 12 Inch 300 A105 Wnrf Flange

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Stainless Steel 304 Flanges which are produced and supplied through a planned and well-executed strategy of swifter consignment packaging and delivery procedure. Our UNS S30400 Stainless Steel Weld Neck Flanges come in a variety of schedules that are able to accommodate the inner diameter of pipes and are easily identified due to the tapered hub that it sports.

Alloy steel UNS K12822 round bars are widely used in numerous industries for the manufacture of different kinds of components. We provide a full range of alloy steel 15Mo3 round bars which are widely used in engineering, construction and other industries.

S31803 has been supplemented by S32205 which has a higher minimum N, CR and Mo.

Stainless steel 321 fasteners are strong with a minimum yield strength of 276MPa and a minimum tensile strength of 621MPa. The material has a melting point of up to 1399 degrees Celsius and can have very high operating temperatures. This bolt has the highest carbon content and is commonly found in pans and cooking tools. Essentially non-magnetic 321 stainless steel bolts are slightly magnetic when cold worked. Alloy 321 bolts are also used in sinks, tabletops, coffee makers, refrigerators, stoves, utensils and other cookware.

Super Duplex Steel UNS S32760 are dual phase austenitic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel and molybdenum with restricted carbon content and minimum PREN42. Zeron washers have high strength, resistance to pitting, stress corrosion cracking, erosion and corrosion fatigue, crevice corrosion resistance.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding

Rotary draw bending can also utilize mandrels.

La tuberia soldada ASTM A790 UNS S32205 se fabrica para obtener una resistencia adicional. Los tubos soldados se laminan en caliente, mientras que los tubos sin costura se estiran en frio.Ambos pueden reforzarse aun mas mediante el trabajo en frio, pero hasta cierto punto.

All of our stainless steel tubes are made from grade 304 stainless steel, fully certified and sourced from accredited mills which we have worked with for over two decades. Chemical and mechanical certification is available on request.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

To be sure, huge numbers of the reactions of Alloy Steel F9 Slip On Flanges meddle with each other, requiring the utilization of process models to help in analysing alternatives, improving contending reactions, outlining productive commercial practices. The specification is for high temperature pressure services. The SA 182 Gr F9 Steel Pipe Flanges come in the size range of ? inches to 48 inches with dimensions varying according to the ASTM, ASME and other international standards.

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

Increased temperatures have prompted many of our customers to use superalloy Inconel 718 forged rings. Since Inconel uses nickel as its primary alloying agent, the use of Inconel 718 fasteners at elevated temperatures has no negative effect on the application or the equipment being used.

The yield strength of 2205 is about twice that of austenitic stainless steel. This allows designers to reduce weight and make the alloy more cost-competitive compared to 316L or 317L.

Flat washers protect surfaces by evenly distributing torque when tightening bolts or screws. They prevent corrosion between steel screws and aluminum surfaces. Nylon washers can be placed under machine screws to reduce noise and wear and provide electrical insulation. Gaskets are used in plumbing and hydraulic projects.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Gaskets are SCC resistant which is prominent in many applications such as hot water tanks, brewing tanks, desalination plants and processing plants. Therefore, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers exhibit the properties of ferritic and austenitic alloys.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A789 / ASME SA789 covers grades of average wall thickness, or, if specified on the order, minimum wall thickness, of stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are suscep- tible to embrittlement if used for prolonged periods at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The chemical behavior of titanium metal has remarkable similarities with zirconium and silica.

Antioxidant and sustainable in an open environment. The temperature resistance of Inconel 718 flanges is very high, which means that N07718 flanges can withstand the high temperatures of various manufacturing and processing industries.

SS 316L seamless pipe fittings possess greater durability under pressure and higher aesthetic appeal than its less expensive welded counterpart.

Duplex Stainless Steel UNS S31803 Hex Head Bolts Hex head and threaded bodies are available.

Pipelines for gathering sour gas have been built with solid (or clad) INCONEL? 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

A variety of stainless steel pipes are available in different schedules. These schedules define the thickness of the walls of these stainless steel pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Incoloy 800 Bolts and Incoloy 800HT Bolts can be easily welded and machined through standard shop fabrication practices. However, due to the high strength of the alloys, they require higher power process equipment than standard austenitic stainless steels. Meanwhile, Incoloy 800 fasteners are iron, nickel and chrome alloy fasteners. It has excellent resistance to oxidation and carburization at soaring temperatures. They remain very stable at extreme temperatures and retain their austenitic structure.

The combination of all elements of the bolt accounts for 10% of the weight of the steel. As the name suggests, HSLA bolts are heat treated for higher strength. These washers remain ductile, making them easy to form and machine, while exhibiting higher corrosion resistance than ordinary mild steel.

A wide variety of stainless steel flanges are all available at HT PIPE, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.

La tuberia Incoloy 800 es una de esas tuberias de alta resistencia que tambien es resistente a la oxidacion y la carburacion. Por lo tanto, estas tuberias se utilizan en aplicaciones donde se requiere resistencia a la corrosion y la carburacion.

Our ASTM A403 SS 304 Elbow has a tensile strength of 75 ksi, guarantees extreme dexterity, has a load-carrying capacity high enough to work under constant pressure, is resistant to atmospheric corrosion, and can be used to seal pipe ends and prevent General-purpose fluids such as internal contamination.

The addition of chromium and molybdenum to a182 grade f9 enhances the corrosion resistance of the flange.

Duplex stainless steel, famous for its excellent combination of good mechanical properties and high corrosion resistance, is widely used in the industrial fields, such as the production of seawater heat exchangers and the chemical containers for use in the high-concentration chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”