bar 2507 super duplex bar round S32750 bar

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A182 F53 Super Duplex Flanges available with rating class of 150#, 300#, 400#, 600#, 900# and 1500# in sizes NPS 1/2 to 24.

UNS S32205 Hex Bolts (also known as S31803) are made of high grade duplex 2205 stainless steel. Because this material is composed of at least 22% chromium, 6% nickel, and 3% molybdenum, it can withstand some of the harsh environmental conditions that other metals cannot, such as corrosion, cracking, erosion, pitting, and more. Stainless Duplex 2205 Hex Bolts also provide twice the mechanical strength compared to standard stainless steel.

The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. 2205 is often referred to as the workhorse grade and is the most widely used grade in the duplex stainless steel family.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

Designers may have the option to reduce the wall thickness of the duplex 2205 welded pipe, because of its high yield strength. The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade. Unlike austenitic steel pipe, the Duplex 2205 Tube may at times exhibit magnetic behavior because the microstructure of its alloy contains about 50% ferrite.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The A182 F51 material has carbon, 2% manganese, phosphorus, sulfur, 1% silicon, chromium, 4.5% nickel, 2.5% molybdenum and nitrogen it.

The yield strength of 2205 is about twice that of austenitic stainless steel. This allows designers to reduce weight and make the alloy more cost-competitive compared to 316L or 317L.

Duplex Steel S32205 bar stock is a ferritic, duplex, austenitic 3% molybdenum, 22% chromium and 5% – 6% nickel alloy stainless steel.

The granular structure of duplex is a ferrite-austenite hybrid with a superior strength to weight ratio in comparison to 304 or 316. It balances the weldability of an austenitic with a pure ferritic and retains decent mechanical toughness in applications with exposure to colder ambient temperatures.

Inhibiting deformation and cracking at high temperatures, the dual phase steel S31803 / S32205 reducer is superior to common steel parts in the chemical industry that are susceptible to chloride stress corrosion cracking. With flue gas desulfurization machinery. Tees such as ASME A182 Duplex Steel S31803/S32205 are known to have good resistance to high toxicity and elasticity.

This heat treatment performed on the Duplex 2205 Pipe must be keeping with accordance to the specified temperature and quench conditions.

Duplex¡¯s premium mechanical and chemical properties are slightly offset by its difficulty in formability.

Offering the industry an improved stainless steel corrosion solution, Duplex 2205 Bolts have good sulfide corrosion resistance, as well as chloride pitting and crevice corrosion superior to 317L. The combination of chromium, molybdenum and nitrogen provides Duplex 2205 bolts with good chloride pitting and crevice corrosion protection, which makes them useful in marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications.

Duplex stainless steel is designed to combine improved resistance to stress corrosion cracking (including sulfide stress corrosion cracking), pitting, crevice corrosion and high strength when compared with other stainless alloys.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

Super Duplex tubes for the increasing hostile temperature and operating environments – where maximising operating efficiency demands total product reliability. 2507 Super Duplex Products therefore have very his corrosion cracking resistance and tensile strength.

The Benefits of Duplex Stainless Steel are improved Strength, because many duplex grades are as much as two-times stronger than austenitic and ferritic stainless steel grades, high Toughness and Ductility, high Corrosion Resistance, and Cost Effectiveness.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

Alloy 2205 gets the name Duplex because it is composed of two different types of grains. 40-50% of its grain structure is austenite and 50-60% of it is ferrite. It is closely related to, but much more popular than Alloy 255. In most environments, it surpasses 317L in crevice corrosion resistance. 2205 Duplex excels in chloride environments and resists hydrogen sulfide. 2205 Duplex has almost twice the strength of 316L. Due to the lower nickel and molybdenum content, it is less costly than Alloy C276. Among the places where 2205 Duplex is used include pressure vessels, heat exchangers and scrubbing systems.

ASTM A240 Duplex 2205 Sheets contains approximately 40-50% ferrite. Often referred to as the work horse grade 2205 is the most widely used grade in the duplex family of stainless steels.

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The dual microstructure and chemical composition of ASME SA 479 UNS S32760 bar makes it a high performance alloy. Due to its designation as a superalloy, most manufacturers are aware of the very valuable mechanical properties of F55 UNS 32760 Hex Bar.

The microstructure of ASME SA 479 Duplex Steel UNS S32205 Flat Washers includes a combination of ferritic and austenitic phases. ASTM A479 Duplex Steel UNS S31803 Gaskets have excellent general corrosion resistance in a variety of aggressive chemicals including industrial and seawater acids. Buy duplex stainless steel washers from us at leading market prices.

Duplex 2205 fasteners have high toughness and hardness while also possessing high levels of tensile strength, all as a result of the chromium present in them. However, it can be concluded that dual phase steel fasteners are undeniable; neither deformed nor damaged. This anomaly is much less likely to happen. 2205 Duplex Fasteners consume delicate structures made from ferritic and austenitic stainless steels that are considered part of an alloy, and the end result provides excellent mechanical properties in duplex fasteners.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The round and hollow pipes are usual ones. In addition to the Duplex Stainless Hollow Pipes and the Duplex Steel Round Pipes there are square, rectangular and hexagonal pipes available in the market.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

DIN 933 technically ranges from M1. 6 to M52, whereas ISO 4017 ranges from M1. 6 to M64. Secondly, that’s it really, the DIN 933 and ISO 4017 standards are the exact same with the exception of M10, M12, M14 and M22.

ASTM A1082 specification alloy S31803 fasteners have higher pitting and crevice corrosion than stainless steel alloy 316. Due to its higher corrosion resistance, alloy grade UNS S31803 is able to exhibit better fatigue strength than other commonly used austenitic stainless steel grades in environments containing corrosive media.

Duplex 2507 is a super duplex stainless steel containing 25% chromium, 4% molybdenum and 7% nickel. This alloy is designed for applications requiring excellent strength and corrosion resistance.

2507 has Combination of properties given by austenitic and ferritic structure, and Good weldability and workability.

At this temperature, duplex steel flanges over 300 degrees Celsius are still protected from embrittlement due to corrosion. Duct capability is also excellent at low temperatures. Fabrication is done only with tools assigned to stainless steel materials. Must be properly cleaned before use. This is done to protect the stainless steel from cross-contamination of the corroding metal.