big size–1-8 to 106 steel pipe fitting-elbow-tee-reducer-cap-carbon steel-ready to ship

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Cupro Nickel Forged forgings are annealed at temperatures between 593 and 816 degrees Celsius (1100 and 1500 degrees Fahrenheit). Copper-nickel forged threaded crosses are still widely used in modern shipbuilding.

Alloy 600 is machinable in both hot and annealed conditions. Due to the large amount of heat generated when machining this alloy, high-speed steel, cast non-ferrous or carbide tools should be used.

Incoloy 800 is a popular choice in the oil and gas industries because it can withstand sour gas and high chloride environments.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

The pipe cap is directly welded to the mold at the end of the pipe; the end of the pipe can also be welded with a flange, and then blocked with the flange. If necessary, the flange can be opened to inspect the inside of the pipe. Traditional thick wall gland seat; forged; large diameter by rotation. After maintenance or even wiring is required, use a blind pipe, not later, use a pipe cap. Using a blind plate has the possibility of leakage. After a long time, the screws will rust and die, which is also useless, and the heat pipe is not easy to insulate.

At HT PIPE. we invest in premium resources and dependable technology and machinery. NISPL has given an impetus to several industries during the last three decades, through its outstanding products and extraordinary services.

A stainless steel 304 short radius elbow has a radius that is longer than the outside diameter of the pipe it is installed on. These accessories fall under ASTM A403 specification. Their nominal diameters range from 1/8″ to 48″. The standards for these dimensions are ASME B16.9 and B16.28. 304 stainless steel 90 degree elbows are commonly used elbows.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.

Stainless steel 304 welded outlets can become very brittle at long-term temperatures of 1200¡ãF to 1500¡ãF. Also for machinability of stainless steel 304 socket weld outlets, high speed turning and cooling tools are recommended. The range of stainless steel 304 threaded outlets shown is made up by utilizing high grade machinery and modern methods to pass many strength limitations.

Carbon Steel ASTM A105 threaded Forged Fittings are low Carbon, Manganese and Silicon added fittings which are usable for non-critical yet pressure applications, like refrigeration fittings, that work at constant temperatures.

Stainless steel 304 is a type of stainless steel that is resistant to corrosion and rusting. Stainless Steel 304 Forged Fittings are used for connecting two pipes or tubes together and can be made from a variety of metals, including copper, brass, aluminum, or stainless steel.

Hastelloy C276 has a low carbon content to minimize grain boundary carbide precipitation during welding to maintain corrosion resistance in the heat affected zone of the welded joint

The alloy exhibits excellent resistance to seawater and brine, making it well suited to marine applications.

They are used in plumbing fixtures such as domestic, commercial and industrial water supply lines, machinery and process equipment. They are also installed on the pump line and their sole purpose is to remove air blockages.

HT PIPE is one of the well-known manufacturers of ASME B16.11 threaded bushings, manufactured in a variety of styles and materials, designed to fit a variety of standard and metric threads as well as various types of threaded fittings and assemblies. We offer threaded hex bushings that have excellent resistance to chloride ion stress corrosion cracking, and also exhibit appropriate resistance to a variety of oxidizing environments.

It is ideal for food processing, chemical processing, and fluid transportation. The most common uses for stainless steel forged fittings are in food and fluid processing, as well as chemical applications. Stainless Steel 304 is the best choice for forged fittings because of its inherent properties.

This alloy is not suitable for highly oxidizing acids such as nitric acid and nitrous acid. It is resistant to sulfuric acid up to 80% and hydrochloric acid solutions up to 20%.

a105 is also a material code, belongs to the special steel, is a cold forged steel. The a105 is a mild steel forgings similar to the 20 steel.

Carbon Steel A105 Grade all products like flanges, butt weld fittings, forged fittings, outlets, round bar that is Fabricated From High Quality Raw Materials. Carbon Steel A105 products are available in Following Specification, Grade and Sizes.

Nickel alloys are combinations of nickel and a variety of other metals that make strong, oxidation-resistant products with an average lifespan of 25 to 35 years. Monel 400 is a nickel-copper alloy containing approximately 67% nickel and 23% copper.

We offer products at highly competitive prices and deliver consignment within stipulated time. Our Pipe inventory is available in random lengths or cut to specific lengths to meet your exact requirements.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

Nickel fittings are manufactured through a hot or cold forming process, which means it can be bent and formed into the correct shape.

Carbon steel ASTM A105 socket weld forged fittings are usually ¡°normalized¡± heat treatment, devoid of any internal stresses and thus having superior performances.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

A steel nipple fitting is a straight length of pipe with external threads on both ends. It is one of the most popular categories of pipe fittings. It is a connector or coupling with threads on both ends. Fittings are used to connect pipes to water heaters or other pipes.

Alloy 625 (UNS N06625) is available in Round Bar, Flat Bar, Extruded section, Pipe, Tube, Plate, Sheet, Strip, Plate, Hexagon, Forging Stock, Extruded Section, Wire and Powder.

Nickel alloy pipe fittings are composed of alloys with nickel as the main element. There is complete solid solubility between nickel and copper. Its wide resolution range between iron, chromium and nickel enables many alloy combinations.

Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for connectors, hangers and block valves. Hardness levels up to 22 HRC are approved to NACE MR0175. The grade is often used as the base metal for clad components.
If supplied to ASTM A182 in the normalised and tempered condition, the 0.2% Proof Stress minimum is 30 KSI.Grade 22 of the ASTM A182 alloy steel is a low-alloy steel that contains 2.25% chromium. Often used as base metal for clad components, the F22 is also used in the oil patch wellhead applications for products such as hangers, connectors, and block valves, among others.