blind flanges ansi 16.5 slip welding raised face 200mm class 300 bs pn16 lap joint flange Alloy 800

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.

Nickel 718 plate has higher strength than Inconel X-750 and better mechanical properties at lower temperatures than Nimonic 90 and Alloy X-750. Nickel 718 coils offer excellent solderability compared to aluminum and titanium hardened nickel-based superalloys.

Inconel 718 is a high strength, corrosion resistant nickel-chromium material that can be used in temperatures from -423¡ã to 1300¡ãF. Inconel 718 age hardening alloy can be easily fabricated, even into complex parts. The welding characteristics of Inconel 718, especially its resistance to post-weld cracking, are excellent.

The alloy 201 flanges are used to make an alloy of stainless steel. Nickel 201 flanges are made of an alloy of nickel and chromium with having some portion of silicon, iron, and manganese. These nickel alloy 201 flanges are also used in turbine as well as desalination plants, where seawater gets converted into freshwater.

The unique combination of its components makes Inconel 625 highly resistant to corrosive substances.

The alloy is also resistant to ammonia-containing atmospheres as well as nitrogen and carburizing gases.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.

UNS NO 6625 WN Flangs Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

UNS N06601 welded pipe is used in countless industries, key industries including aerospace, heat treatment, chemical processing, pollution control and power generation.

Inconel UNS N06601 Pipe Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 601 (N06601) Nickel-based alloy plasticity machinability.

The Nickel Alloy 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments. The presence of nickel and chromium makes Inconel 625 bolts resistant to corrosion, oxidation and carburization. Molybdenum helps provide excellent fatigue strength and resistance to stress, pitting and crevice corrosion cracking even when exposed to chloride ions.

The chromium content of this alloy results in superior resistance to oxidizing environments. The high molybdenum content makes alloy 625 very resistant to pitting and crevice corrosion.

B564 601 Spade Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Inconel 718 is a molybdenum, chromium and nickel based alloy developed to resist a wide range of severely corrosive atmospheres, crevice corrosion and pitting corrosion.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

High temperature applications exist due to the thick and stable passivating oxide layer formed when Inconel 718 is heated. ANSI B16.47 Inconel 718 flanges are vital to the food, beverage and food processing and textile industries, primarily to create waterproofing systems during pipeline evaluation.

The alloy 601 also has good resistance to aqueous corrosion.

ASME SB564 Alloy 601 weld neck flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Incone1601 alloy is a nickel-chromium-iron based solid solution strengthened alloy, which has good high-temperature corrosion resistance and oxidation resistance, excellent hot and cold processing and welding performance, and has a total resistance below 700 “C.

Inconel 625 round bars are also used in nuclear reactors, combustion systems, rocket thrust chamber tubes, transition liners, compressor blades, turbine seals, and more. It has excellent formability and solderability due to its high nickel content. 625 Round Bar has excellent resistance to a variety of acidic environments such as nitric, sulfuric, hydrochloric and phosphoric environments. In addition, they provide protective properties, surrounded by alkali metals.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Inconel 625 alloy is widely used in chemical processing, pollution control, evaporators, nuclear reactors, marine industry and more.

Inconel 625 combines heat resistance, corrosion resistance and strength. Inconel 625 fasteners are used in environments ranging from low temperatures to 1800o F (1000o C). Antioxidant is the main feature. Like alloy C276, Inconel 625 is a nickel-chromium-molybdenum alloy. Adding niobium results in a stronger material. Common applications are marine environment and pollution control equipment.

The alloy has excellent high-temperature oxidation resistance, good high-temperature mechanical properties and corrosion resistance, and is easy to form,

Inconel 601 is an alloy composed of nickel and chromium.

Inconel 600 es una aleacion de niquel-cromo utilizada en aplicaciones que requieren resistencia a la corrosion y a altas temperaturas. Esta aleacion de niquel esta dise?ada para usarse en temperaturas altas que van desde temperaturas bajas hasta 2000 ¡ãF. No es magnetico, tiene excelentes propiedades mecanicas y exhibe la combinacion ideal de alta resistencia y buena soldabilidad en un amplio rango de temperatura.

Inconel 601 is an alloy composed of nickel and chromium.