Buy Stainless Steel 254 SMO Welded Pipes and SMO 254 Square Pipes Stockist

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

ASTM A182 F11 class 1 Flange is the method of connecting two pipes, pumps and valves. This consists of chromium molybdenum based alloy steel grade.

The 316 stainless steel pipe bends can undergo processes, like cold forming and welding, where the austenitic crystal structure is transformed into ferromagnetic martensite. 316L steel is more susceptible to gaining some degree of magnetism.

If your outdoor appliance enclosure is rusted, not only is there a danger of exposing all critical electrical components inside, but it can be expensive to replace in the event of a short. We’re talking about parts damage and replacement, repair costs, including labor and downtime. I’ve seen some real horror shows when the shell is rusted. We have found that using 316 stainless steel instead of 304 stainless steel on outdoor enclosures that will be exposed to various elements, such as oil rigs, not only increases the life of the enclosure, it is also safer.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.43

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges. HT PIPE is a leading supplier and manufacturer of the Inconel 600 Flanges in different shapes, types and scales. The flanges come in different varieties such as GOST flanges, JISB2220, BS1560-3.1 and so on. The pressure ranting of the flanges vary from class 1500 to class 600.

C276 is a nickel-molybdenum-chromium superalloy with tungsten added, designed for excellent corrosion resistance in a variety of harsh environments. The high nickel and molybdenum contents make nickel steel alloys particularly resistant to pitting and crevice corrosion in reducing environments, while chromium is resistant to oxidizing media.

Stainless Steel 309 Stud Bolts compared to 302 has a low carbon-higher chromium stainless steel which is used for cold heading and often for hot heading of large diameter or long Bolts.

Stainless steel pipes can withstand corrosion, thanks to the passive chromium oxide layer that forms on the surface. It performs particularly well against chloride-induced stress corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

This steel grade is a medium carbon alloy and also contains certain amounts of manganese, phosphorus, sulfur and silicon.

Grade SMO 254 Long Weld Neck Flanges are thermally stable and possess moderate strength even when the temperature is high. SMO 254 Threaded Flanges whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion, and cracking.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

Stainless Steel 304 Grade Blind Flange
Sometimes called a blanking flange; use to blank off pipelines, valves, and pumps, or as an inspection cover. Suitable for use with Schedule 40 or 80 stainless steel pipe, in applications with air, water, natural gas, and steam.

304/304L stainless steel has strong corrosion resistance when the boiling point concentration of nitric acid is less than or equal to 65%. Alkaline solutions and most organic and inorganic acids also have good corrosion resistance. A high-alloy steel that can resist corrosion in air or chemically corrosive media, stainless steel has a beautiful surface and corrosion resistance, and does not have to wait for surface treatment through color, and exerts the inherent surface properties of stainless steel, commonly referred to as stainless steel. Represents the properties of high alloy steels such as 13 chrome steel and 18-8 chrome nickel steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Stainless steel flange is a kind of general steel material, which is widely used in equipment and parts with good comprehensive performance requirements (corrosion resistance and molding).

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

Incoloy 800/800H/800HT pipes are mainly made of nickel-iron-chromium alloy, which has excellent resistance to carburization and oxidation, and has good tensile strength. These steel alloys are the same. The only difference is the percentage of aluminum and titanium in these alloys. However, if we talk about products like pipes and pipes, they are considered to be the most demanding and widely used products. Due to their exceptional properties and superior performance, these products are used in several industries and applications.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

Exposures like this are regularly experienced during heat treatments that are linked with fabrication.

316 steel pipe is appropriate for applications that require corrosion resistance above other traits. Ferritic or martensitic types of steel (those made with the most chromium) are manufactured to be either heat-treated or annealed.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A312 TP 310 is a medium carbon austenitic stainless steel suitable for high pressure and high temperature service. There are different grades such as ASME A213 and 312. Grade 310 is an austenitic stainless steel with excellent high temperature properties, as well as good ductility and weldability. Type 310 stainless steel tubing is typically used in high temperature applications. The high chromium and nickel content of grade 310 steel pipe provides excellent corrosion and oxidation resistance, as well as excellent strength at temperatures up to 2100¡ãF.

316 stainless steel has more carbon in it than 316L. This is easy to remember, as the L stands for “low.”

Hastelloy B3 suppliers and Hastelloy B3 manufacturers can be reached out to all over the country.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. Alloy C-276 is frequently used in many industries, including chemical and petrochemical processing, oil and gas, power generation, pharmaceutical, pulp and paper production and waste water treatment. End use applications include stack liners, ducts, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, evaporators, transfer piping and many other highly corrosive applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

HT PIPE is highly acclaimed manufacturer of the complete range of Stainless steel 304/ 304L pipe fittings such as SS 304 reducer, SS 304 elbow, SS 304 tee, SS 304 cross, SS 304 stub ends and SS 304 pipe bends.

La aleacion C276 se considera una de las listas de productos de superaleaciones. Las superaleaciones (o metales especiales) se utilizan en entornos hostiles debido a su capacidad para manejar condiciones corrosivas.

304 stainless steel is a category of stainless steel manufactured according to the specifications of the American ASTM.These 304L Stainless Steel Pipes and Tubes, also identified as UNS 30403, can be welded at a thickness greater than 304 or heated without the need for corresponding solution heat treatment for appreciable amounts of time above 500 ° C.

These alloys are widely used in chemical processing, pollution control, evaporator, nuclear reactors, marine industries, and so on.