C276 hex bolt 2.4819 bolt hex m16 x 130mm

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

This nickel-molybdenum alloy is typically used under extreme reducing conditions and has a much lower composition of carbon, silicon and iron than Hastelloy B (Alloy B). Screws made from this alloy are also known as UNS N10665 fasteners.

Hastelloy Alloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel.

It has great resistance to stress-corrosion cracking and pitting. Hastelloy B-2? also features hydrochloric acid resistance at all concentrations and temperatures.

Hastelloy B3 Socket Weld Flanges is dual-certified to meet both SS 316 and SS 316L.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Hastelloy C276 Specialty Bolts are a standard grade of austenitic stainless steel fasteners based on 15% chromium and 57% nickel.

Otra diferencia entre la tuberia soldada Astm B626 de aleacion de niquel C276 y la aleacion C es que la tuberia de aleacion C276 tiene una mejor maquinabilidad.

Alloy X is known for its excellent high temperature strength and can withstand temperatures up to 2200¡ãF. The alloy can also be easily fabricated by manual and automated methods with forming and welding properties. In addition, Hastelloy X is resistant to corrosion, heat and oxidation and can withstand reducing or neutral atmospheres and oxidation.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

The Ni-Cr-Mo superalloy Hastelloy C276 has excellent resistance in strong acid and alkali media and prevents pitting, crevice corrosion and SCC. Hastelloy C276 also has broad resistance to wet chloride gas, hypochlorite and chlorine dioxide media.

Our Hastelloy B2 Ring Joint Type Flanges is not recommended for use in the presence of ferric or cupric salts as these salts may cause rapid corrosion failure. Ferric or cupric salts of these Hastelloy B2 Nippo Flanges may perhaps develop when hydrochloric acid comes in contact with iron or copper.

C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Hastelloy C276 sheet and plate in wear resistant stainless steel. It provides excellent resistance to stress corrosion cracking in very high temperature environments; its high tensile strength provides extreme thermal stability.

Hastelloy B3’s distinguishing characteristic is its ability to maintain good ductility while transient exposure to intermediate temperatures.

It is used in flue gas desulfurizations systems because of its excellent resistance to sulfur compounds and chloride ions encountered in most scrubbers. C-276 alloy has excellent resistance to pitting and to stress- corrosion cracking.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

While there are slight variances to different hot pipe bending methods, nearly all are a form of induction bending.

We have a comprehensive inventory of nickel alloy forged fittings, socket weld and threaded fittings in all types, sizes, schedules and pressures. HT PIPE specializes in the manufacture of nickel alloy forged fittings that are in high demand in many applications in the naval, chemical processing, marine, petrochemical and refining, and oil and gas markets.

Modern processing systems are often a complex network of turns, elevation changes, fittings, and more.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

These have the advantage of nickel and molybdenum providing resistance against the most reducing environments. The oxidation resistance is also high in these materials due to the addition of the chromium content.

Hastelloy C276 plates are referred to as excessive-alloy steels, which have superb corrosion resistance in assessment with different steels as they include greater chromium.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. Hastelloy 276 bolts and fasteners are suitable for most chemical applications in the welded condition. However, it should be noted that in environments where C-276 alloy weld joints are subject to attack, C-22 weld filler material should be considered.

Hastelloy C276 Flanges Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it. The Hastelloy C276 Flanges have high melting point of 1370 degrees Celsius. This high melting point allows for higher operating temperatures of the flanges. The material also has 790MPa minimum tensile strength and 355MPa minimum yield strength.

Thus these Hastelloy B2 Flanges are considered to be well suited to be used for most chemical process applications in an as-welded condition. Due to lower carbon content in the alloy, there is reduced precipitation of carbides as well as other phases in the heat-affected weld zones, which in turn ensures uniform resistance to corrosion in the flange.

Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack-gas re-heaters, fans and fan housings.