c276 seamless pipe

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

The seamless nature results in a very uniform surface, which results in a uniform wall thickness along the length of the pipe. There are alloy nickel tubes and pure alloy tubes. Pure nickel pipe is actually commercially pure and contains about 99% nickel in its composition. Nickel welded pipe is ideal for welding needs. Nickel is inherently very corrosion resistant and lightweight. These attributes of elements are used in various applications.

According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Inconel alloy tubes is cooled in air. The alloy has superior resistance to Carburization.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition. The Seamless Nickel Alloy Pipes are usually cold drawn and has less absolute roughness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 600 alloy is a nickel-chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride-containing atmospheres. It is a non-magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.
ASTM B167 Alloy 601 Seamless Pipe Supplier, Inconel 601 Pipe Exporter, ASTM B983 Inconel 718 Pipe, ASTM B516 Inconel 600 Welded Pipe, ASME SB444 Inconel 625 Seamless Pipe, UNS N06600 Welded Pipe, Inconel 600 Seamless Pipe, Inconel Pipe Made in India business.

Nickel 201 is highly resistant to corrosion by neutral and alkaline salt solutions, fluorine and chlorine, but severe corrosion occurs in oxidizing salt solutions.

Inconel 625 is an austenitic steel. These pipes are designed with high-quality nickel, chromium and molybdenum compositions, enabling the pipes to carry fluids and gases in corrosive and oxidizing media.

Inconel WERKSTOFF NR. 2.4851 Pipe has attractive properties such as its high mechanical strength and the ability of ASTM B167 Inconel 601 Seamless Pipe to be easily formed, machined and welded.

Inconel 600 pipe is a nickel- chromium based alloy. Alloy 600 UNS N06600 Square Pipe offers good resistance against corrosion at elevated temperatures. The other characteristics of the 600 Inconel Seamless Pipe is its good resistance in carburizing as well as in chloride containing environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures can range from cryogenic to 980¡ãC (1800¡ãF). Alloy 625 strength is derived from the solid solution strengthening effect of molybdenium and niobium on its nickel-chromium matrix.

Inconel 718 is a nickel-chromium-molybdenum superalloy designed to resist a variety of severe corrosive environments, crevice corrosion and pitting corrosion. This nickel alloy also exhibits extremely high yield, tensile and creep rupture properties at elevated temperatures. Inconel 718 is intended for long-term use from low temperatures to 1200¡ãF.

Alloy B2 (UNS N10665 / W.Nr. 2.4617) is a solid solution strengthened, nickel-molybdenum alloy, typically used in extreme reducing conditions.

On the other hand, the class 2 Hastelloy C276 Welded Tubing produced according to the ASTM B619 specification is welded, cold worked and is furnished in a solution annealed condition.

Inconel625 is a non-magnetic, corrosion and oxidation resistant, nickel-based alloy.

La tuberia de aleacion Incoloy 20 UNS N08020 se usa generalmente en la construccion, exploracion de petroleo, medicina, alimentos, papel, maquinaria, productos quimicos, contenedores de alimentos y otras industrias.

As a basic form of Incoloy 22 Nickel Tube will find widespread general use, further alloying with enhancing elements provides added resistance to Incoloy 22 Nickel Tube to chemical and environmental corrosion, as well as physical deterioration, such as surface pitting and cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Corrugated Stainless Steel Tubing is stainless steel tubes with helical groove obtained from a plain tube by cold forming. The quantity of Helix and Angle could be designed to optimize the heat transfer performance.

These tubes have a yield strength between 30 to 60ksi and can be readily elongated by 60-30% in the system.

Los tubos de caldera de aleacion C276 estan disponibles en tama?os ATSM 622/ 619/ 775/ 516/ 626. La tuberia sin soldadura Hastelloy C276 funciona bien incluso en agua salada corrosiva. Los fabricantes de tuberias Hastelloy recomiendan la tuberia soldada Hastelloy Astm B626 C276 por su resistencia a los compuestos de cloro.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

La aleacion 20 contiene contenido de cobre que ayuda a proporcionar una excelente resistencia general a la corrosion. Debido a su resistencia a las picaduras, la corrosion por grietas y la corrosion, la aleacion de acero inoxidable se usa ampliamente para fabricar equipos de decapado, tuberias de proceso, intercambiadores de calor y tanques de fabricacion.

As previously mentioned, one of Inconel¡¯s benefits is its ability to be used in ¡®extreme¡¯ environments. These ¡®extremes¡¯ are either extreme temperature or extreme pressure.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Inconel X-750 alloy (UNS N07750) tube consists of approximately 70% nickel alloyed with chromium, iron and other select elements.

Monel400 Copper-nickel alloy (UNSN04400) is a soft Copper-nickel alloy that is resistant to various corrosive environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The main feature of nickel-based alloys is their excellent strength across a wide temperature range combined with good corrosion resistance. In this sub-group, the material standards also define the allowed hardness range, and hardness is a significant factor affecting the machinability (besides the chemical composition).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy 800 Tubes are superalloys that are composed of a nickel-iron-chromium base and can resist both carbonization and oxidization in high temperature settings. Incoloy 800 Tubes are easy to fabricate, utilizing the same machines and processes as stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Copper nickel alloys are very corrosion resistant to sea water as well as thermally stable. Aviva Metals stocks C70600 and C71500 Copper Nickel pipes.