c71500 round bar Copper nickel alloy round bar

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC). Compared with other precipitation hardening nickel alloys, this alloy has relatively good weldability, formability and excellent low temperature properties. The alloy’s slow precipitation hardening reaction makes it easy to weld without hardening or cracking. Inconel? Alloy 718 is non-magnetic. It maintains good corrosion and oxidation resistance for applications requiring high creep and stress-rupture resistance at temperatures up to 1300¡ãF (704¡ãC) and oxidation resistance up to 1800¡ãF (982¡ãC) parts.

Alloy 600 is a nickel-chromium-iron alloy characterized by: good mechanical properties at low, room and high temperature, very good resistance to stress corrosion cracking, even at high temperature, high temperature corrosion resistance to dry chlorine and hydrogen chloride Good resistance and good resistance to oxidation, carburization and nitriding.

Steel bars are widely used in industrial maintenance, farm implements, transportation equipment, decorative iron products, fences, artwork, etc. This steel shape is easy to weld, cut, form and drill with the proper equipment and knowledge.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 625 bar is typically part of the types of equipment used in marine applications such as heat exchangers, fasteners and cable jackets.

K-500 is characterized by high corrosion resistance and is an ideal alloy for use in marine environments where constant contact with salt water is required.

INCONEL? alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423¡ã to 1300¡ãF. Inconel alloys are resistant to oxidation and have the ability to maintain its structural integrity in high temperature atmospheres.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

ASTM B446 UNS N06625 bright bar has excellent strength and toughness in the temperature range from low temperature to high temperature such as 2000¡ãF. In addition to high tensile strength, this Inconel 625 ingot has a high degree of formability and better weldability than many other high alloyed nickel-based materials.

Inconel 600 can be used where end use requires high surface stability. As a superalloy, Inconel 600 is known to have good creep and good oxidation resistance.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. Molybdenum and nitrogen contents significantly improve pitting and crevice corrosion resistance in halide media. At the same time, nickel and nitrogen not only ensure the stability of the metallographic phase, but also reduce the tendency of intergranular segregation during thermal process or welding process better than nitrogen content. Nickel alloy. 926 has exceptional corrosion resistance in chloride ion media due to its excellent localized corrosion resistance and 25% nickel alloy content.

Inconel 625 round bar is one of the more common grades of Inconel round bar available. The Round Bar is AMS 5666 compliant. Inconel 625 can be used in a variety of applications. Inconel 625 has high strength, excellent fabrication and excellent corrosion resistance. The viable temperature range for Inconel 625 starts at cryogenic temperatures up to 1800¡ãF.

Similar to other Inconel alloy grades, the base element of alloy Inconel 625 spring steel bars is nickel. UNS N06625 / W.Nr. 2.4856, also known as Nickel Alloy 625 Hot rolled bar is an alloy of nickel and chromium with the addition of molybdenum and niobium.

Our Inconel 718 Forged Round Rod and Inconel 718 Bright Rod exhibit high burst and tensile properties even at high temperatures.

Alloy 925 / Incoloy 925 / UNS N09925 is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. Each of these additions plays their part in making Alloy 925 a high strength alloy with excellent corrosion resistance. Alloy 925 is used in a variety of applications in the crude oil and natural gas industries because of its resistance to sulfide stress cracking and stress corrosion cracking, making it the perfect alloy for downhole and surface gas well components.

Inconel 601 is an alloy composed of nickel and chromium.

Monel 400 is an alloy of nickel and copper, typically formulated at about 67% nickel and 33% copper.

The alloy 601 also has good resistance to aqueous corrosion.

High levels of chromium and molybdenum provide excellent resistance to localized corrosion. The high nickel content provides very good resistance to stress corrosion cracking.

Improvements in alloy metallurgy, melting techniques and thermomechanical processing led to the development of Alloy 31, a relatively low cost alloy with high corrosion resistance.

Alloy 718 is a precipitation hardenable nickel-based alloy designed to exhibit extremely high yield, tensile and creep rupture properties at temperatures up to 1300°F.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

2.4375 Monel K500 round bar is non-magnetic, as an alloy, Monel K500 ASTM B865 hexagonal bar exhibits excellent mechanical properties over a temperature range from sub-zero settings to 480C. Monel ASTM B865 hollow bars require annealing when welded, and weldments should be stress relieved to the alloy prior to aging.

Alloy 400’s alkali resistance makes it ideal for deployment in highly acidic environments such as salt water, sulfuric acid or hydrofluoric acid.

Alloy 625 (UNS N06625) is a nickel-chromium alloy that is hardened by the addition of molybdenum and niobium, so the alloy does not need to be aged. It has excellent resistance to various corrosive environments and the high temperature effects of oxidation and carburization.

Inconel 600 round bar is also known as Alloy 600 or UNS N06600/W.Nr. 2.4816. Chemically, Inconel 600 Din 2.4816 Bar consists of three main alloying elements, namely nickel, chromium and iron, of which nickel is the main component of the alloy.

Acknowledged with its best corrosion resistance and resistance to impingement attacks at high temperatures and pressures among other copper alloys, plus its good resistance to biofouling, C71500 round bar are just the ones for you!

The advantages and disadvantages of copper-nickel alloys are that pure copper plus nickel can significantly improve strength, corrosion resistance, hardness, electrical resistance and thermoelectricity, while also reducing the temperature coefficient.

Nickel UNS N02200 Rod is a ferromagnetic, commercial purity (99.6%) metal product that exhibits good mechanical properties over a wide temperature range, along with high ductility and resistance to a variety of metals including hydroxides. Excellent resistance to corrosive materials. Nickel 200 alloy bars also showed good hardness levels, about the same as annealed mild steel. Additionally, Nickel 200 round bars can be found in hardened and tempered forms. It is a commercial unalloyed nickel with excellent corrosion resistance and very low resistivity. It also has other properties such as weldability, formability and high tensile strength.

Hastelloy C276 grade round bars also have good corrosion resistance in seawater and brine solutions. They are also known for their resistance to localized corrosion such as stress-related corrosion cracking and pitting.