Carbon steel A234 pipe fittings elbows ANSI ASME B16.9 B16.28 MSS-SP-43 elbows

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

ASTM A350 lf2 round bars are forged from standard quality carbon steel alloy. It has excellent tensile strength, corrosion resistance, ductility and mechanical properties that make it an excellent product. These carbon steel A350 LF2 bars are guaranteed to deliver the toughest industry standard products of the highest quality. Our CS A350 LF2 bars are made with the support of the latest equipment and are fully compliant with established industry specifications.

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

STM A105 FLANGES AS PER ANSI B16.5, BS10 TABLE D, TABLE E, DIN STANDARD FLANGES manufacturers

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Forged steel is the excellent mechanical property of almost any flange product. The process of manufacturing happens with carbon steel, alloy steel, or stainless steel.

In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Monel 400 is a popular nickel-copper alloy commonly used in high performance applications. The alloy has high resistance to acidic and alkaline environments, high strength, good ductility and thermal conductivity. Monel 400 is suitable for use in the subzero to 1,000¡ãF (538¡ãC) temperature range and can only be hardened by cold work.

ASTM A105, also known as carbon steel, is an iron-carbon alloy with an internal carbon content of nearly 2 percent.

U-bolt diameter: ¦Õ7mm, plate size: 3.890 x 1.142 x 0.110mm.
Material: Q235B carbon steel, electro-galvanized surface to improve the rust and corrosion resistance of U-bolts.
Nut: Anti-slip washer design.
Application: For fixing or connecting blocking pieces to pipes, wood, etc. Suitable for boats, plumbing and other domestic and industrial applications.
Package Contents: 10 U-Bolts, 20 Nuts, 20 Round Washers, 10 Plates.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

It is essentially a normal carbon steel and is not resistant to corrosion. It will rust unless protected. It can be easily bent or cold formed like regular carbon steel.

As an ISO certified company, we stand by the principles of quality, safety, and precision in all our products.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

A234 WPB steel pipe fittings mean the pipe fitting which material is ASTM A234 WPB,they are used for the pressure piping systems of moderate and high temperature services.

Material for forgings shall consist of ingots or forged, rolled, or strandcast blooms, billets, slabs or bars. The Carbon Steel A350 LF2 Flanges have a minimum tensile strength of 485MPa and a minimum yield strength of 250MPa. In addition to being forged, the materials used to produce the A350 LF2 Welding Neck Flange are to be heat treated along with a heat and product analysis conducted on them.

ASTM A106/ASME SA106 is the standard specification for seamless carbon steel pipe applied for high temperature services. It includes three grades A, B and C, and common use grade is A106 Grade B. It used in different industries not only for pipeline systems like oil and gas, water, mineral slurry transmission, but also for boiler, construction, structural purposes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

SA234 WPB Elbow is made up of carbon steel or alloy steel.

Carbon steel is a special type of steel that, as the name suggests, has a higher carbon content than other types of steel. Most types of steel have relatively low carbon content, around 0.05% to 0.3%. In comparison, carbon steel has a carbon content of up to 2.5%. Twenty and a half percent carbon may sound insignificant, but it brings several attractive benefits not found elsewhere.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

ASTM A516 CS 70 grade flanges are used in a variety of applications such as bridges, buildings, auto and truck parts, rail vehicles, pressure vessels, boilers, valves, heat exchangers, cargo containers, suitcases, construction equipment, structural pipes and Power poles, etc.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Flange wn a350 lf2 has moderate strength and impact toughness and is used extensively for the manufacture of flanges and fittings. The a350 lf2 welding neck flange is one of those welded flanges which can perform very well. The forged, threaded or screwed flanges are useful in different opportunities. These are good in handling pressure resistance, strength and durability. These are used in applications like industrial, chemical manufacturing factories and many others.

ASTM A105 covers forged carbon steel flange and piping components for ambient and higher-temperature administration in pressure systems

RFWN Flanges (Raised Face Weld Neck Flange) are one of the most commonly used flanges in the piping industry. They are easy to recognize with their long tapered hub that is matched to the wall thickness (bore) of the pipe.

The specification for Iso Class 4.8 standard covers Grade 4.8 fasteners like Bolts/Screws/Studs. This type of fastener Class 4.8 Bolt could either have Coarse thread and fine pitch thread formation. The standard Class 4.8 Carbon Steel Bolt has been manufactured from Low or medium carbon Alloy Steel.

The SA234 Grade WPB Tee is a fitting used to connect three pipes together at one point.Hot formed or forged WPB, WPC, WPR fittins made at above 980¡æ[1800¨H] shall be annealed, normalized, or normalized and tempered. NPS4 hot forged fittings no need to be heat treated.