carbon steel pipe fitting tee SA234 tee

Stainless steel 317L is commonly referred as UNS S31700, and is primarily comprised of 18% to 20% chromium and 11% to 15% nickel. 317L is molybdenum bearing austenitic stainless steel similar to 316, but with higher molybdenum content.

Inconel 625 elbows are made from a non-magnetic nickel alloy. It has high toughness and strength. The material is resistant to corrosion and oxidation. Inconel 625 elbows are used for high temperature and high pressure applications.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance.

Alloy X pipe bend is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts.

ASTM A234 is standard of the pipe fitting material. However, this is indicating the properties of the material of various kinds of alloy steel and carbon steel. WPB is a steel grade in which W stands for weldable, B is grading B and P stands for pressure. Thus it is referring minimum yield strength.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

The surfaces of these parts have a mottled appearance due to general corrosion. Additionally, they weaken the alloy and require frequent replacement to prevent catastrophic effects. Because the alloy has good resistance to general corrosion or uniform erosion, from a financial standpoint, the industry can use 304 stainless steel welded fittings without denting their pockets.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Monel 400 (also known as alloy 400) is an attractive option for industries where corrosion resistance is of the highest priority.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

We manufacture SA403 WP 304 Short Radius and Long Radius Elbows very strong with a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. These work well in high temperature environments up to 870 degrees Celsius.

We are manufacturing Stainless steel 317L forged fittings in both socket weld and threaded form and Stainless steel 317L pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D. We offer ex-stock delivery of various standard size and type Stainless steel 317L pipe fittings, Stainless steel 317L flanges and Stainless steel 317L pipe bends.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

S32750 (2507) is a duplex stainless steel that combines many of the excellent properties of ferritic and austenitic steels. Due to its high chromium and molybdenum content, it exhibits excellent resistance to pitting, crevice and uniform corrosion. The two-phase microstructure ensures that the steel has high resistance to stress corrosion cracking and high mechanical strength. In addition, it also has the characteristics of strong resistance to chloride pitting, high thermal conductivity and low thermal expansion coefficient.

Alloy Steel Buttweld Fittings is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. It has many inherent advantages such as it provides permanent leak proof to the fittings. The continuous metal structure formed between fitting and pipe gives strength to the system. Smooth inner surface and gradual directional changes minimize the action of corrosion and erosion and reduce pressure losses and turbulence. It doesn’t make it any less vulnerable to rust when exposed to the elements since it is ferrous

An elbow is a flexible component that allows changing directions in a piping system. Elbow is divided into two groups of long radius and short radius, which can be changed by 45 degrees, 90 degrees and 180 degrees. Elbows can be classified based on distance, which changes in direction from the centerline to the opposite face of the component. Also called center distance. Opposite the center for long radius elbows is the 1.1/2 X nominal pipe size, while for short radius elbows it is the same as the nominal pipe size.

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

Industry users like the resistance to a wide range of organic acids and the resistance to chloride-induced stress-corrosion cracking.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel 316H Stub End Pipe Fittings are equivalent to those of the parent metal, matching or slightly over-alloyed fillers should preferably be used.

Incoloy 800 Welded Butt Welded Fittings also contain 1.50% manganese, 1% silicon and up to 0.75% copper. Incoloy Alloy 800HT 180 degree bend has excellent corrosion resistance to stress corrosion cracking. Typically, these Incoloy UNS N08800 seamless pipe fittings are heated in the temperature range of 648 degrees Celsius to 760 degrees Celsius.

Hastelloy C2000 pipe fittings is a nickel-chromium-molybdenum alloy. It is most commonly available in wrought forms at the mill level. Hastelloy C2000 can be used in applications requiring high metallurgical stability in reducing or oxidizing atmosphere. It is also sed in chemical process equipment applications.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless Steel 316L is an extra-low carbon version of the grade 316.