carbon steel round bar ASTM 694 F46 bar in fabrication

ASTM A694 carbon steel is the most common grade of carbon steel used for round bar development. The increased carbon content of the alloy reduces ductility by increasing tensile strength.

ASTM A333 Grade 6 Pipe is a carbon steel pipe that meets ASTM, ASME and API standards. Pipe series is available in grades 1 to 11 and sizes range from 1/2″ to 48″.

A350 LF3 material is often referred to as low temperature carbon steel fittings or flanges.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

These ASTM A182 alloy steel pipe fittings are suitable for high temperature and high pressure environments.

The flanges also have good strength properties. There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type because it closes a connection and not expand it.

There are different pressure classes such as class 150, 300 and up to 2500 and PN6 through PN64. The A105 Class 300 Flange and below don¡¯t need heat treatment while the higher pressure classes can undergo heat treatment.

ASTM/ASME/ANSIB16.5, B16.47, ASME/ANSIB16.48 flange
Weld neck flange,WNRF Flange,Welding neck raise face flange,

Carbon steel washers are made of very high quality raw materials, which ensure high durability at their user end. These carbon steel washers widely find their valuable application in various industrial fields.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

ASTM A105 flanges shall be manufactured as one piece by a hot-forging process. This hot-forging process, either die forging or open-die forging, is a compressive hot-working operation. The metal flows in the designed direction during plastic deformation to form a disc-like product that is near to the finished flange.

Carbon steel pipe flanges usually adopt mild steel or low carbon steel, as it includes small percentage of carbon, strong and tough but not readily tempered. Which with lower cost and material could be used for many applications.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

ASTM A694 carbon steel flanges are available in different grades, the most common being F52, F60 and F42.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

The combination of all elements of the bolt accounts for 10% of the weight of the steel. As the name suggests, HSLA bolts are heat treated for higher strength. These washers remain ductile, making them easy to form and machine, while exhibiting higher corrosion resistance than ordinary mild steel.

Pressure-Temperature Rating of ASTM A350 Gr. LF3 flanges are identical to ASTM A105 flanges.

The material has carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium in its composition.There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type.

ASTM A106 is the same as ASME SA-106 and is the standard specification for carbon steel seamless pipe for high temperature service. It covers pipe sizes from NPS 1/8 [DN 6] to NPS 48 [DN 1200] with nominal wall thicknesses given in ASME B36.10M.

The SA234 Grade WPB Tee is a fitting used to connect three pipes together at one point.Hot formed or forged WPB, WPC, WPR fittins made at above 980¡æ[1800¨H] shall be annealed, normalized, or normalized and tempered. NPS4 hot forged fittings no need to be heat treated.