carbon steel WPB fittings eccentric reducer for plumbing hot rolled ASTM ASME SA 234 pipe adapter ASME B16.9

Duplex fittings have medium performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304. What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel.

Nickel alloy 20 is a low-carbon, niobium-stabilized austenitic nickel/iron/chromium alloy with additions of molybdenum and copper. ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

Cuni 70/30 elbows have superior strength to withstand higher speeds in seawater.

The melting of titanium can only occur in a chemically inert atmosphere such as a vacuum.

Pipe caps are used in plumbing equipment such as domestic, commercial and industrial water supply lines, machinery and process equipment. Pipe caps are also installed on the pump line for the sole purpose of removing air blockages. We provide 1-8- 6 size duplex 2205 pipe fitting cap.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

SS Stub end is available in normal pipe size and the dimension and tolerance of these pipes are defined as per ASTM B16.9. When compared to threaded and socket weld SS Buttweld fittings have many advantages. One of them being that the threaded and socket fittings are available in 4 inches whereas the buttweld fittings are available in the size range of ? inch to 72 inches.

The Molybdenum of Hastelloy B2 pipe bend is the primary alloying element which provides significant corrosion resistance to reducing environments.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance to a wide range of media.

Short elbows are widely available and are typically used for pressurized systems in physically tight locations.

Inconel 625 elbow works well even in extreme temperatures under high stress.

Typical applications for alloy 800 and 800H are – Heat exchangers and process piping; carburizing fixtures and retorts; furnace components; electric range heating-element sheathing; extruded tubing for ethylene and steam methane reforming furnaces; ammonia effluent coolers.

Inconel alloy butt welded joints are used in all steel industries due to their high quality raw materials and design. Not sure, but mostly the steel and metals industries buy products so that butt welding can take the pressure. It is mainly used in the petrochemical industry because butt welding performs well in terms of processing temperatures, but also the automotive and refining industries are major users.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

ASTM A403 WP 347 fittings are available in a variety of sizes and configurations. Our product range includes pipe connectors, adapters, reducers, tees, elbows, and they are also available in a variety of thread types. It is designed to provide leak-free connections suitable for a variety of applications supporting today’s major industrial markets.

Stainless steel pipe is a kind of hollow long round steel or square rectangular material, which is widely used in industrial transmission pipelines and mechanical structural parts. In addition, with the same bending and torsional strength, stainless steel pipes are lighter in weight, so stainless steel pipes are also widely used in the manufacture of mechanical parts and engineering structures.

Stattin Stainless stocks a complete range of grades 304 and 316 fittings. The range includes 45¡ã, 90¡ã and 180¡ã LR Elbow, 90¡ã SR Elbow, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Cross, Hose Tail, Seal Flange, cover and spray ball.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

When titanium is mixed with other metals, the alloys can reach a tensile strength of more than 1,400 MPa, which makes 200,000 psi.

ASTM A403 WP321H is the higher carbon (0.04¨C0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000¡ãF (537¡ãC). In most instances, the carbon content of the plate enables dual certification. Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

Pure titanium is almost 99.2% pure and is a lustrous metal with low density and high corrosion resistance.

INCONEL Inconel 601 (UNS N06601 / W.Nr. 2.4851) is a general purpose engineering material for applications requiring heat and corrosion resistance. An outstanding feature of INCONEL 601 alloy is its resistance to high temperature oxidation.

Our stainless steel UNS S31600 reducer price list is very competitive with market prices. Reducers are used to reduce the diameter of pipes. There are eccentric reducers and concentric reducers.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

Hastelloy B3 pipe fittings is a Nickel, Molybdenum, and Chromium alloy which has excellent resistance to pitting, corrosion, stress-corrosion cracking plus and thermal stability superior. Alloy B3 exhibits excellent resistance to sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.

We assemble SS 316 / 316L pipe connectors with premium quality that can withstand high pressure and temperature. For the fabrication of these pipe fittings, we select the premium quality raw material. These fittings are of excellent quality, such as perfect finish, durability, excellent pitting resistance, low maintenance, and robust construction.