Carbon steel WPB reducing tees unequal tees smls fittings hot rolled ASTM ASME SA 234

As an important category of pipe fittings, pipe caps are in great demand. If a solvent welded cap is used as a future connection point, you must leave a few inches of tubing in front of the cap; when the cap is cut off for future connections, you must leave enough tubing to allow the new fitting to be glued to it. We offer 1-4 inch bw ss pipe fittings 304L cap.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

2205 fittings are highly demanded for the unique characteristics and performance they exhibit in their application. These products are manufactured and delivered in various shapes and sizes according to customer requirements. These pipes are transported to various industries including storage tanks, boiler production and desalination plants. The percentage of alloying elements used in the manufacture of fittings and duplex stainless steel pipes is lower at lower cost.

Our Duplex Steel S31803, S32205 Seamless Pipe Fittings are machinable and weldable and ductile even at low temperatures. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

When we call a steel tee ¡°equal tee¡±, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. When we see only one size of tee in its description, it means this tee is the equal tee. for example, 8¡å tee mean the tee main pipe and branch pipe both are 8 inches. Sometimes the equal tee also described 8¡åX8¡å which is the same meaning of 8¡å tee.

We manufacture Alloy 825 tubing for use in pollution control tools, oil piping and gas equipment. In addition, they are used in the power generation, petrochemical and pharmaceutical industries.

Stainless steel 316 butt weld joints are made of chrome-nickel-molybdenum alloy austenitic stainless steel. The material has good corrosion resistance, similar strength to 304 grade steel, and good hardness.

Stainless Steel Pipe Fittings are used in the water pipeline, natural gas, fabrication, and nuclear power plant industry.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Typical application for MONEL K500 which takes advantage of high strength and corrosion resistance are pump shafts, impellers, propeller shafts, valve components for ships and offshore drilling towers, bolting, oil well drill collars and instrumentation components for oil and gas production. It is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater.

We are also shareholders of carbon steel pipe fittings, such as carbon steel butt welding elbows, butt welding carbon steel crosses, butt welding carbon steel tees, butt welding carbon steel end caps, carbon steel butt welding short pipe ends, etc.

When we call a steel tee ¡°equal tee¡±, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. When we see only one size of tee in its description, it means this tee is the equal tee. for example, 8¡å tee mean the tee main pipe and branch pipe both are 8 inches. Sometimes the equal tee also described 8¡åX8¡å which is the same meaning of 8¡å tee.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

AS1210 Prequalified Incoloy 800 can be used at 800¡ãC. ASME codes allow Incoloy 800 to 815¡ãC, and Incoloy 800H and 800HT to 982¡ãC.

An ASTM A403 WP304 Fittings is a type of austenitic grade fitting. SS Pipe Fittings can either be seamless or ERW.

Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

Titanium behaves as an inert element in the presence of oxygen and water, which means it does not react with oxygen and water at ambient temperature conditions.

Monel 400 is corrosion resistant to most salts, water, alkalis, organic substances, food products, and atmospheric conditions at both normal and elevated temperatures.

Inhibiting deformation and cracking at high temperatures, the dual phase steel S31803 / S32205 reducer is superior to common steel parts in the chemical industry that are susceptible to chloride stress corrosion cracking. With flue gas desulfurization machinery. Tees such as ASME A182 Duplex Steel S31803/S32205 are known to have good resistance to high toxicity and elasticity.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel Weld Fittings have a melting point of 1400 degrees C and an operating temperature of 870 degrees C.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

Sanitary pipe fittings AISI304, AISI304L, AISI316, AISI316L, its standard is DIN/SMS/3A/ISO/IDF, pipeline flow control: DN10-DN200&1 /4″”-8″, it is used in stainless steel pipe system, its working principle It can be welded on the pipeline to adjust the flow in the pipeline. Its medium includes beer, dairy products, beverages and pharmaceuticals.